New to 9mm - worth reloading?

I reload not only for 9mm but other handguns and rifle and also shotgun.It is my hobby and I also cast my own boolits I do not buy them and I use very little jacket. Some of the 357/38 boolits I cast I size down to use in the 9mm. Just like the 32 cals I reload for with cast boolit I size down for use in 30 cal. It is worth it for me to reload 9mm . It depends on what works for who is the user.
 
For jacketed bullets, it is cheaper to buy factory ammo than to reload.

Unless you want a specialty load, or you are going to load lead bullets, it's a bad idea.
Had you said "it's not worth it", it would have been a value judgement I wouldn't dispute.

Using Precision Delta Jacketed 115gr ($166/2000= $0.083ea) and remaining supplies from Powder Valley today including shipping and Hazmat, the cost is $6.00 per box of 50.

Reloading may still be a "bad idea' lol, but the cheapest I've seen factory for is ~$8.00 per box. And if you need to get a box at the range, it's more like $13.50/box lol.
 
I don't quite understand. Going to have to think myself through this real quick.

OP has a really nice progressive press, has no issue switching from large to small primer and is very familiar with reloading.

The last time I ran 9mm on a Dillon 550, it was at 400 rounds per hour. I currently load in batches of 1000 on a Dillon 650 at just over an hour and load 5-8,000 rounds per month.

IMO, the biggest advantage is you get to build the exact load you want. I shoot a LOT of 9mm and there isn't anything on any shelf to buy that checks all the boxes for me so I load my own. And it's so very much cheaper than store bought.

The only thing that would make or break the choice is how much is your time worth? If it's worth more than the cost difference and you are happy with store bought, DON'T load your own. If you enjoy loading your own ammo and store bought isn't just right, DO load your own.

Just my $0.02 for your consideration
 
Past couple of years the supply of ammunition has been pretty good and prices have been reasonable. It isn't always that way! Many of us remember a couple of times when nothing was available on a regular basis, and anything available was priced way too high.

I've been shooting for nearly 60 years. I've been reloading for 47 years. I've been casting bullets for about 45 years. Anytime I add a firearm in a caliber I have not used in the past I always order a set of reloading dies and a bullet mold.

I like being independent of the usual supply channels. I like shooting my home-made cast bullet loads in most handgun calibers for less than the retail price of .22 rim-fire ammo. Most of all I like being able to shoot anytime I want to, especially while everyone around me whines about not being able to get ammo.

Right now, while supplies are good and prices are stable, I am building my supplies of primers and powder. I expect history to repeat itself.
 
If you already have the gear, press,dies, scale etc. then it will save a few bucks, but not much..... If you are just starting out, and have no equipment, then it's not really worth it...Buy at Walmart.
 
If the amount of money you would save is the only reason for reloading 9mm it's probably not a big deal. I reload for a hobby, 45s, 38s, 357 mags save considerably, 9mm not so much but I still reload them. I'm retired and have the time and it beats mowing the lawn, plus both sons and daughters shoot 9mm so it keeps them happy too and doesn't break the bank on my end. I too would like to know where he gets CCI primers for $20/1000, sure not even close to that here.
 
Depends. When the next inevitable ammo drought rolls around and you want to say "What ammo shortage?" then it's not a bad idea.

If you have a couple of tubs of free brass & cast your own bullets you can save some $$$ but generally you're just gonna shoot more. ;)
 
I loaded tons of ammo for my rifles, shotguns and pistols when I was young.
Today in my senior years with my eyes going bad, even with glasses..................
I am loading less, even though I still enjoy the process.

My age and operations are catching up with me and my hands are not as steady
which means less time enjoyed at the range and outside shooting
this last year.

If you do reload, enjoy it while you can.
 
Hello fellow reloaders. I am wondering if I would be wasting my time reloading for the 9mm Luger,
Arman

If you consider reloading as work, you probably should just buy your 9mm ammo. I consider my time at the reloading bench, whether using one of my single stage presses or my 550c, as time away from the rest of the world. I also like to know exactly what load I'm shooting in any of my guns. Another thing I like about reloading 9mm is that I can and do load bullet weight that are not available commercially. I load 100 gr bullets for my wife to practice with(less recoil) and I load 130 and 135 gr bullets that are not commercially loaded. As I have stated before, I'm not sure if I shoot more so I can reload more ammo or reload ammo so I can shoot more.:confused: :D
 
Last edited:
About 10 years ago, during the irrational run on ammo, I got into loading 9mm because I couldn't find it (or any other ammo) on the store shelves. I found Accurate #5 to be my favorite powder and plated 124 Gr. RN to be my 'go to' bullet. The Accurate Web site has plenty of reloading info on this and other calibers.

After the mass hysteria subsided, I went back to buying 9mm off the shelf. I can get it for around $14 a box. I mainly jet reload revolver calibers now.
 
if you buy all the stuff now to reload. It will take you 8 years to break even. If you are looking for a new hobby, its a great choice if your a shooter. 9mm and any straight wall case are easy to load. When you start getting into rifle different story. I hate to trim brass and all bottle neck case will need to be trim. So the prices of ammo is low on 223, so I don't reload 223/5.56 at this time. I started 30 years ago and always used 550b Dillon stations. I have 2 one for small primer and the other for large primers.

good luck this a fun hobby
 

Attachments

  • IMG_1359.jpg
    IMG_1359.jpg
    121.8 KB · Views: 25
Last edited:
I only handload 9mm for a couple of ancient Astra 600s I own, and to tune specialty rounds I shoot in a suppressed carbine. Otherwise 9mm Parabellum is reasonably priced and offered in great variety.
 
Like stated about the way it was a few years ago when ammo was had to come by ,I did not had any problems with the ammo I reload I did watch how I shot my 22lr ammo .I had end up work on have the centerfire ammo to shoot like a 22lr on most of my rifle because of how it was. So I will keep load 9mm no matter what. In the end you are independent also.
 
I use the Dillon 550B and an old Lyman Turret Press. I'm set up and have the dies to load 9mm, .38, .357, .44 Special, .44 Magnum, .45 ACP/AR, .45 Colt, .30-30, 5.56 and .308. Prior to moving to Arizona, loaded up as much in all calibers as I had brass, bullets, powder and time for. I found in the move that I had a lot of ammunition I had loaded and pretty much forgotten. After moving here and setting up my new shop, I'm again collecting and saving brass for all of the calibers I listed above. However, I see little advantage in loading 9mm at this time with the prices for range ammo being what they are.

I enjoy reloading and will continue to reload everything but 9mm for the time being. I recently got some .45 ACP cylinders for my Uberti 1873s and probably won't need any more .45 Colt for a while, but I have quite a bit on-hand. Aside from the 9mm, I will still buy and load components for the other calibers as needed. As others have said, it's prudent to keep your dies and components on hand for all of the calibers you shoot because of the changing political situation. Just because I'm not currently loading a specific caliber, it doesn't mean that I won't continue to pick up components and store them for a rainy day.
 
Last edited:
if you buy all the stuff now to reload. It will take you 8 years to break even. If you are looking for a new hobby, its a great choice if your a shooter. 9mm and any straight wall case are easy to load. When you start getting into rifle different story. I hate to trim brass and all bottle neck case will need to be trim. So the prices of ammo is low on 223, so I don't reload 223/5.56 at this time. I started 30 years ago and always used 550b Dillon stations. I have 2 one for small primer and the other for large primers.

good luck this a fun hobby

8 years to break even? Perhaps if you are starting out with a high-end progressive loader, buying all the trinkets, etc.

I have used single-stage presses exclusively (I own 3) for 47 years. Many of my tools have been purchased slightly used from others who tried reloading and decided it wasn't for them. I have also shopped sales and close-outs, picking up some excellent deals over the years. I regularly load 5,000-plus rounds per year (yes, there is some time involved, but I enjoy doing this instead of watching stupid TV shows or other wasted time).

I have little doubt that a person can get a start in reloading for a single caliber today for under $200, perhaps even $150. That equates to about a dozen boxes of factory ammo (and not the high-performance stuff at that).

Commercial hard-cast bullets in most pistol calibers can be had for ~$70 per thousand delivered to your door ($0.07 per). Powder at about $20 per pound will load between 1000 and 1500 rounds (about $0.013 to $0.02 per). Primers at about $30 per thousand ($0.03 each). Cost per loaded round (in reused brass) is about $0.12 per round ($6.00 per 50-round box), or about half the price of the cheapest factory 9X19mm ammo.

Given those numbers the new reloader will break even at about 25 to 33 boxes of ammo. The casual shooter, going to the range once per month and shooting one box of ammo per trip, breaks even at about 6 to 7 months. A more serious shooter, perhaps 150 to 200 rounds per month), breaks even in about 8 or 10 weeks. Either way, after that the equipment is fully amortized and the savings can continue indefinitely.

I've been casting bullets myself, using salvaged lead, for decades. I figure 9mm and .38 Special cost me about $3.00 per box, and .45's a few cents more. Some of my vintage and antique firearms are kept shooting with homemade ammo for pennies per round instead of a buck to two per round (if you doubt this just check the prices for factory-made .44-40, .38-40, .25-20 and a few others!).

I agree with others who have pointed out that the most likely result of reloading is more shooting. That is a good thing, too, because the shooter can shoot two or three times as much within the same budget. Double or triple the enjoyment for the same buck! Another plus is that more practice generally leads to greater proficiency.
 
8 years to break even ?
Just goes to show you how numbers can be manipulated .
Post #49 , LoboGunLeather...well said and the real truth in numbers.
Gary
 
I'd still load 9mm, but if you honestly couldn't care about your ammo so long as it chambers and goes off, just buy it buy the case.

As a side note, I think that .223 is just as rewarding to reload as any other rifle cartridge. Factory ammo shot around 1.25"-1.5" @ 100 yards in my gun. For around $12/box, I loaded some Hornady V-Max 40-grainers that shot a little over .6" CTC at 200 yards. That's 1.5 MOA to .3 MOA in a factory rifle.
 
If you place a high monetary value on your non-working time, and don't feel like $15 and hour is a worthwhile return for it (what I save loading 150 rounds an hour), and shooting twice as much for the same money (or the same amount for half the money) doesn't appeal to you, then you are better off buying cheap bulk ammo for range fodder.

BUT, if you already have the tools (except maybe 9mm dies), feel like $15 an hour is a worthwhile return on your hobby time, then it is worth it. It all depends on your personal feelings and preferences. Whether you actually DO it or not, it is always good to be ready and able when the time comes that ammo is hard to get.

Like the old saying, ammo will get you through times of no money better than money will get you through times of no ammo...
 
Last edited:
For me the big benefit in *not* reloading 9 is not having to chase brass. I mostly reload for revolver. But as said, collecting some brass for the next shortage may be a good idea.
 
For me the big benefit in *not* reloading 9 is not having to chase brass. I mostly reload for revolver. But as said, collecting some brass for the next shortage may be a good idea.
If you reload a 9mm wheel gun you will not chase brass. I shoot both wheel gun and semi auto.Mainly cast boolits I do myself. like I do all my other center fire ammo.It works for me ,factory ammo is a good start to see how your gun shoots with reloading you can get it shot better then the factory ammo that is for universal .
 
I have dies dies for 9mm but have loaded very few. To start with you have to have a 9mm pistol worth loading for. That has nothing to do with the value of the pistol. The bulk of 9mm pistols are gut busters and get very little benifit if any from hand loaded ammo. I load all revolver cartridges and pour my own bullets. The only thing I shoot jackets in is a Ruger SBH 44mg for deer. Also load the older 25/20, 32/20, ect with lead cast. In rifle calibers 22hor to 375H&H with factory jacketed bullets. There's not many dies I don't have that are commonly or have been common, along with obsolete and military. I load for quality of accuracy not quantity and do save money. The 9mm unless you have a match gun is not worth loading to me.
 
It's worth it to me but, when I got into it 9mm was hard to find and expensive. I just enjoy making my own ammo, it's the satisfaction of a job well done... Cost wise using lead cast bullets, I'm probably spending $7.00 per 50 rds assuming I reload my cases quite a few times so it's maybe a 20-30% savings which is certainly something but, from a strict cost savings perspective nah it's not worth it on 9mm.. 45acp is all day long but, not so much on 9..
 
Hello fellow reloaders. I am wondering if I would be wasting my time reloading for the 9mm Luger
Thanks!
Arman

For me? No, I love loading the 9mm for target grade accuracy in my 1911. It's the only gun that I can still shoot good groups with at 50 yards. Cost is secondary.

For you, I think so.
 
How much do you shoot 9's? I shoot a lot and I can reload about 11 cents.
Even if you think you might not it would be a good idea to get a few thousand. Just in case of a ammo shortage again. Save your brass...
 
I didn't start reloading 9mm until the 2012-14 ammo shortage. I personally don't shoot much 9mm, but my son did. So I bought another caliber change for my Dillon SDB and cranked out a thousand rounds. I gave most of it to friends who couldn't find 9mm anywhere.

Since then, I've decided to make sure I can generate my own ammo for my own weapons - don't want to get caught in another "shortage". I like the feeling of self-sufficiency.

Cost me $130 for the caliber change (dies, toolhead, etc.) and I didn't break even on 1K rounds. Although in some sense I did since 9mm ammo was crazy expensive from scalpers.
 
Back
Top