New/used model 36-0

[Tech23]

I just picked up a used model 36-0. I'm new to the gun scene, and was looking for input on things I will need such as ammo (practice and personal protection), range bags, ear protection, cleaning kits, CC holsters...the whole ball of wax. I have done some research, but seek info. based on personal experience. Date of manufacture appears to be 1975.

Can anyone identify the maker of the finger grip that is on my .38 special?

This site is gonna keep me up late at night...i just know it...LOL.

Thanks in advance,

Tech23

 

[1 old 0311]

Nice piece! The grip is a Tyler T Grip. They are still sold.

 

[murphydog]

Hi, and welcome! The extension is called a Tyler T-grip, still being made. Would recommend shooting glasses and one of the electronic ear protectors (try several for fit and weight) plus earplugs for indoor range use. A locking case of some type, a Hoppe's Bore Snake and Break Free lubricant. I'd practice with generic 130 gr FMJ or 148 gr waductters, and try several self-defense loads to see which one you and the gun likes (Speer 135 gr Short Barrel, 158 gr +P SWC). Enjoy!

 

[redlevel]

Tech23, what you have there is the classic little 5 shot pocket revolver. I would say pocket holster for cc. If I were going to carry on the belt, I would carry something a little larger. I personally carry a Model 60 in an old Bianchi thumb break holster, but in a front pocket rather than owb.

For some perspective on your gun and how good it looks, here is my 36 I bought in 1973 and carried regularly in a pocket with no holster for 30 years. It is a testament to what 30 or so hot, humid Georgia Summers, combined with several dunkings in various creeks and streams where I had irrigation systems, and a lot of days and nights when I sweated my clothes through several times will do to a blue finish. Oh, shortly after I bought it, I carried it to a local machine shop where we ground the hammer down while it was still in the gun. No apparent ill effects from the rough 'smithing. The gun is still tight. I fire it for function three or four times a year. It is good to go right now.

 

[Ray1970]

Congratulations! I just picked up it's twin brother in stainless... except this is a round butt... even had the T-grip....

 

[Pilgrim]

Don't forget they came in nickel too!

36 no dash

 

[Tech23]

Don't forget they came in nickel too!

36 no dash

Thanks for all the replies...

The gun shop where I purchased mine had one under the counter by the register "ready to go". I checked it out while I was there...very nice. Do you know what year it was produced? What should I expect to pay for a Nickel model 36 if I were to run across one? Was there a stainless steel version?

It seems the Tyler T grip was a popular add on for the model 36. Many I have seen have had them.

I need to purchase cleaning supplies. Should I go with a kit or buy what I need separately? Would the Hoppe's bore snake be better than a brass bore brush followed by patches? I can't seem to locate a complete kit with brass and nylon bore/cylinder brushes, cleaner, lubricant, patches and the necessary attachments. Most kits seem to have either too little or too much. Any suggestions for a good reputable online gun accessory business to deal with....Midway USA, Cabelas...etc.

Tech23

 

[Ed333]

misc

Midway is good. Keep it simple, I use a boresnake for the bore, spray can of BreakFree, toothbrush for the corners and cylinder faces front and rear, wooden chopsticks for running patches thru chambers and bore. I use a slightly oversize bronze bore brush for the chambers on a short coated or carbon fibre rod, a .40 should do, a .38 starts feeling like it is too loose after a few cleanings. Get a nice piece of flannel, either a designated gun cloth, or an old used tee shirt. Get a silicone cloth and wipe the piece down everytime you handle it. Don't need a fancy expensive kit.
Watch what you set the gun down on, certain woods and finishes can react and leave a spot on your cylinder. Don't soak your stocks in BreakFree or oil, you should take them off for thorough cleanings.
Tyler Tee's are STILL highly valued, especially by people with large or long hands, I use tee's on virtually all my snubs. The stainless version of a m.36 is a model 60, but current production is just a tad bigger frame, what they call the Magnum J frame.
If you are seriously interested in a nickel plated m.36 snub, send me a pm.

 

[desertdweller]

I am glad to see more forum members from the sunny state of Arizona!
You will love your newly acquired 36. I have both a 2" & 3".

 

[Tech23]

I am glad to see more forum members from the sunny state of Arizona!
You will love your newly acquired 36. I have both a 2" & 3".

desertdweller, I'm guessing we will see more from Arizona joining soon. I say that because of the new CCW law going into effect. That's why I came aboard....

New Concealed-Gun Law Enacted in Arizona

It appears the model 36 is virtually indestructible, and when it comes time to count on a (CCW) firearm the M36 has earned the reputation as "old faithful". I know I will love it...I'm already looking into a second wheel gun.

Tech23

 

[aterry33]

For personal protection, my favorite is Speer Gold Dot 135 grain+P hollow points, the short barrel stuff.