ptrumble1
Member
Just got a 95% 4 inch Model 19 and the nickel has some very light scratches---what to do? What polishes do you use, Fitz or what? --- and thanx for the info.
Last edited:
Nickel scratches?
- Thread starter ptrumble1
- Start date
Register to hide this ad
Ky Bob
Member
I would like to know that also. I hate too see a nickel finish pistol with swirl marks. I would think that the Flitz stuff would be too harsh and make the finish worst.
Last edited:
BruceM
Member
Flitz is definitely NOT too harsh. That would be the first thing I try. There are other polishes such as Mother's and Simichrome.
Bruce
Bruce
I had the same question, see some good advice I was given here:
http://smith-wessonforum.com/s-w-re...estion-about-s-w-model-15-nickel-plating.html
http://smith-wessonforum.com/s-w-re...estion-about-s-w-model-15-nickel-plating.html
dfariswheel
Member
- Joined
- May 23, 2001
- Messages
- 1,488
- Reaction score
- 1,095
When polishing nickel, keep this in mind.
A scratch in nickel can only be removed by removing the nickel around the scratch.
This is similar to "removing" a scratch in wood by sanding down the wood around the scratch until you reach the bottom of the scratch.
In the case of nickel, you're literally abrading off the plating to "remove" the scratch, and this thins the plating.
Polish a little too hard, too long, or too often and you'll polish the plating right off.
EASY DOES IT, and not too often.
A scratch in nickel can only be removed by removing the nickel around the scratch.
This is similar to "removing" a scratch in wood by sanding down the wood around the scratch until you reach the bottom of the scratch.
In the case of nickel, you're literally abrading off the plating to "remove" the scratch, and this thins the plating.
Polish a little too hard, too long, or too often and you'll polish the plating right off.
EASY DOES IT, and not too often.
Similar threads
