Offical S&W X-Frame picture thread

[roscoepc]

My first attempt at posting pic's so don't laugh too much....

My 500 in the case. After thinking about how to keep some rounds with the gun, I used a drill and an empty case to put some holes in the foam to store some rounds, Also I cut a slit at the bottom front of the barrel to store the allen wrench used to remove the compensator:

 

[A.O.]

My first attempt at posting pic's so don't laugh too much....

My 500 in the case. After thinking about how to keep some rounds with the gun, I used a drill and an empty case to put some holes in the foam to store some rounds, Also I cut a slit at the bottom front of the barrel to store the allen wrench used to remove the compensator:

Hey, would you do me a favor and measure that case LxW, I got one from S&W , said it was large for the 8 3/8" barrel but mine barely fits , even on an angle!

Thanks ,Scott

 

[roscoepc]

OK, that worked so here's a few more! First a shot of her outta her case and 2 with a 6" scale for reference! I hope ya'll like them!!

 

[roscoepc]

Hey, would you do me a favor and measure that case LxW, I got one from S&W , said it was large for the 8 3/8" barrel but mine barely fits , even on an angle!

Thanks ,Scott

Not a problem! It's 11, 1/8" wide by 18, 1/4" long. Also this is the case she came in from the factory...

 

[whitecoyote]

My Nephew shooting the S&W .460 Magnum.

 

[cal50]

My performance center gun , factory stock long barrel ported and my DIY chopped down no-port 6 1/4" 500 revolvers.

How I chopped mine....

http://smith-wessonforum.com/s-w-re...311636-peek-inside-s-w-500-barrel-shroud.html

 

[nipperdog]

American Iron

S&W 500 With my 2004 HD FXST

 

[Chrisj357]

Such a cool pic, wouldn't want to be the one taking that picture in front of that loaded gun though..

Just a note. I took that picture with the other hand, so no photographers were endangered while shooting this photo.

 

[A.O.]

A little update, I've altered my pair a little. Put a scope on my long one , and if you remember up in post 12 I said I had a thing for orange so I altered the little one too.

 

[Glockcubed]

Here are my 460 PC and my 500. Luv em both

 

[JIW 263]

Here's mine just added the bi-pod, going to do some load development now.

 

[Pvt.Joker]

Do you guys know how loud those things are?

WHAT?!?!? WHAT?!?!? WHATD'YA SAY?!?!?

 

[RIDE-RED 350r]

My 460v with Altamont super rosewood grips and Meprolight night sights.

 

[roscoepc]

I wondered what one of these guns would look like with wood grips! That's Nice!!!!

 

[BLUEDOT37]

My 460v with Altamont super rosewood grips and Meprolight night sights.

Looks good!

Do you shoot full loads with them on too??

.

 

[RIDE-RED 350r]

Yes Sir I do... But I have found that my particular 460 doesn't like anything within 1gr of max load of h110 as listed in Hodgdons data without stubborn extraction.

Settled on 47.7gr of h110 pushing a 240gr XTP Mag. At 48gr I get sticky extraction.. Never tried the max of 48.5 listed by Hodgdon.

 

[A.O.]

S&W 500 With my 2004 HD FXST

Oh sure, you went and had to go do the gun/Harley pic thing.. so here's mine with my '07 FLTR





See what I mean about my orange thing???

 

[bcc629]

Does anyone have more pics of the 3.5" 460PC??

 

[nebmike]

Does anyone have more pics of the 3.5" 460PC??

Here 'ya go...

 

[Hammerless-12]

A couple of my 50's. Desert Eagle 50AE and a Performance Center S&W 500.