opinions on the s&w model 617 .22

mg357

Absent Comrade
Joined
Nov 3, 2009
Messages
3,493
Reaction score
2,710
Location
washington illinois
Dear Smith and Wesson Forum i would like to hear some opinions from my fellow Forum members on the Smith and Wesson 617 .22 caliber revolver sincerely and respectfully
mg357 a proud member of the Smith and Wesson Forum
 
Register to hide this ad
All of the 617's are great pistols whether they are a 6 shot or 10 shot versions. I have a 6 shot no dash with 6 inch barrel and it's a wonderful shooter. There are lots of people who like the 4 inch version better then the 6 inch but that's a matter of taste because most all 617's end up being primarily range guns. You could use one for self defense but there are many better options.

They are a heavy revolver when compared to the model 17 because the 617 all have the full barrel under lug and stainless is heavier then blued steel. They are a very strong revolver and I doubt that you could ever shoot one out.

Used versions sell very quickly so if you find one you like at a decent price I would buy it. The 617 no dash came with S&W combat grips like the ones pictured below and after the no dash they shipped with rubber grips starting with 617-1. At 617-5 in 2001 they introduced the internal lock.

617 no dash 6 shot with 6 inch barrel
SW617leftside.jpg
 
Hey mg357, I have a 4'' 617 of recent vintage ( IL replaced with ''the Plug--thanks to fellow forum member Bullseye Smith ) It's a 10 shot. I think its a beautiful weapon both visually and, more importantly, in function. It balances and handles very well in the 4'' length, is very accurate, and is easy to clean & maintain. I searched for a used one for a long time to avoid the IL, but I never found one. Finally I had to order a new one. I replaced the rubber grips with a beautiful set of Ahrends. Now that I have one, I understand why there's few used ones around. Nobody wants to sell theirs ! ! Buy one, you'll be glad you did.......
 
Last edited:
"One Eye Joe" - can you show pictures of the grips. I just got my 617 "4" and have not even shot it yet, but I know I like the look of good grips. Thanks. Bill
 
I have a 10 shot 617-6,4",stock grips, with over 20,000 rounds thru it.I clean it while hot with a Boresnake at the range.Regular cleaning whenever.I shoot cheap Wal-Mart bulk pack ammo.Too much cleaning on a .22 is bad.Takes a licking & keeps on ticking! ;) Also very accurate.
 
Last edited:
They are very good revolvers. They are fun to shoot. I like the 6 inch and the 8 3/8 versions. If you can get a good price, pick one up, you can't go wrong.:D
 
There are brisk sales of both 4" and 6" Model 617's in northern NJ. Practically indestructible as far as I'm concerned. You can't go wrong with either barrel length.
 
My 617 6" always goes to the range with me.
I like the heavier barrel.
I do not believe there is a better 22 out there. JMO
avery
 
This is not a good picture but everyone always leaves this one out the 617 no dash 8in. I had to pick it up cause I already had a 617 no dash 6in I like to try and get one size of each other the guns I like. Both look good next to my 686s so no one really knows what Im shooting when I pull out a Smith.
 

Attachments

  • 617.jpg
    617.jpg
    56 KB · Views: 1,024
I have a six shot 617 with the 8 3/8" barrel. I don't think it has 50 rounds thru it. Problem is that the muzzle is so far out front when I shoot it that it takes 20 minutes for the report to get back to me. I'm also considering welding a caster wheel to the front of the underlug so the muzzle won't drag on the ground when the gun is holstered. I've already solved the heavy front weight problem when shooting. I have 13 helium balloons roped to the front end to hold it up. Gawd, I love my 617!
 
I bought two 617's, both 6 inch and one is a 6 shot and the other was a 10 shot. I bought a new 6 shot cylinder and fit it to the gun that had the 10 shot cylinder, and gave it to my son. I didn't like the 10 shot alloy cylinder, and that was the reason I changed it out.
 
all of them are great choices, I like the 6 shot models just because it is the same as my 686's and I can practice shooting drills more realisticly. You'll have fun swapping springs and trying to get the perfect action on one, just be careful because its easy to get light primer strikes.....I have usually just left the factory springs in mine and polished everything up and was very happy with the results.
 
I have a six shot 617 with the 8 3/8" barrel. I don't think it has 50 rounds thru it. Problem is that the muzzle is so far out front when I shoot it that it takes 20 minutes for the report to get back to me. I'm also considering welding a caster wheel to the front of the underlug so the muzzle won't drag on the ground when the gun is holstered. I've already solved the heavy front weight problem when shooting. I have 13 helium balloons roped to the front end to hold it up. Gawd, I love my 617!

I've been trying to buy an 8-3/8" version, but they are beyond my price range at the time. I'd put a Burris scope on it to match my 686 and 460XVR both also in 8-3/8".
 
I love my 6" 10-shot 617, bought it new this summer, paid through the nose for it but it was worth it, since I have yet to see another for sale "in the wild" and I am tired of doing internet transfers.

Only had it for about 3 months but I have thousands of rounds through it, I immediately mounted a 2x Leupold M8 scope on it, and it's a tackdriver. The low powered optic really brings out the accuracy of this thing. I didn't touch a thing on it, never even had the sideplate off and don't plan to. The action was great out of the box.
 
Back
Top