PC Model Barrel threads?

[Coots]

Hey guys, on my new PC model... I was wanting to add a flash hider to it. Does anyone know what the thread is suppose to be on the end? I've found a couple on Midway that I really like, just don't know which ones are the correct kind.

 

[Redbulladdikt]

1/2-28 TPI

 

[Coots]

What do you think about the ones I've picked out here?

Yankee Hill Machine Muzzle Brake Phantom 5C2 Aggressive 1/2"-28 Thread AR-15 Parkerized - MidwayUSA

DoubleStar Cayman Flash Hider 1/2"-28 Thread AR-15 Steel Matte - MidwayUSA

 

[Redbulladdikt]

its a preference issue--they are simply an asthetic upgrade--they wont have any effect on the performance of the rifle so go with what you like

I personally picked up one of Tacticool22's shrouds...i like the clean plain look

 

[guy22]

What do you think about the ones I've picked out here?

Yankee Hill Machine Muzzle Brake Phantom 5C2 Aggressive 1/2"-28 Thread AR-15 Parkerized - MidwayUSA

DoubleStar Cayman Flash Hider 1/2"-28 Thread AR-15 Steel Matte - MidwayUSA

I have the Yankee Hill, I bought from Midway. Bought it just for the look. But now seeing it on the rifle, I don't think I would like it jabbed into me if you know what I mean?
Guy22

 

[ragingyeti]

its a preference issue--they are simply an asthetic upgrade--they wont have any effect on the performance of the rifle so go with what you like

I personally picked up one of Tacticool22's shrouds...i like the clean plain look

Technically not correct - they are supposed to reduce muzzle rise or suppress the visible flash from firing. However, on a .22LR there isn't a lot of muzzle rise or flash in the first place, so I suppose these might not do much.

What do you think about the ones I've picked out here?

Yankee Hill Machine Muzzle Brake Phantom 5C2 Aggressive 1/2"-28 Thread AR-15 Parkerized - MidwayUSA

DoubleStar Cayman Flash Hider 1/2"-28 Thread AR-15 Steel Matte - MidwayUSA

These do 2 totally different things - the Yankee Hill is a brake, so it reduces the muzzle rise when firing the gun allowing for a quicker follow up shot. The DoubleStar is a flash hider, so it is supposed to reduce the visible flash created from the gun firing. This means that is up to you depending on what you want for a desired effect.

I have the Yankee Hill on my AR15, and I love it. I think it works great, especially for the cost of it.

 

[Coots]

Technically not correct - they are supposed to reduce muzzle rise or suppress the visible flash from firing. However, on a .22LR there isn't a lot of muzzle rise or flash in the first place, so I suppose these might not do much.



These do 2 totally different things - the Yankee Hill is a brake, so it reduces the muzzle rise when firing the gun allowing for a quicker follow up shot. The DoubleStar is a flash hider, so it is supposed to reduce the visible flash created from the gun firing. This means that is up to you depending on what you want for a desired effect.

I have the Yankee Hill on my AR15, and I love it. I think it works great, especially for the cost of it.

I am new to 'tricking' out rifles. I did notice that when I put the little end cap that came w/ the PC model on the end of the barrel, went to the range and shot it, when I got home it was really loose and I know it was tightened really well. Do you use anything to lock it down once you know you want it on there for quite a long time? Lock tight or anything of the like?

Thanks for the advice on explaining the differences in the equipment, I had no idea that they had different uses. I will def. read into it.

 

[Redbulladdikt]

I am new to 'tricking' out rifles. I did notice that when I put the little end cap that came w/ the PC model on the end of the barrel, went to the range and shot it, when I got home it was really loose and I know it was tightened really well. Do you use anything to lock it down once you know you want it on there for quite a long time? Lock tight or anything of the like?

Thanks for the advice on explaining the differences in the equipment, I had no idea that they had different uses. I will def. read into it.

blue loctite

 

[ragingyeti]

I am new to 'tricking' out rifles. I did notice that when I put the little end cap that came w/ the PC model on the end of the barrel, went to the range and shot it, when I got home it was really loose and I know it was tightened really well. Do you use anything to lock it down once you know you want it on there for quite a long time? Lock tight or anything of the like?

Thanks for the advice on explaining the differences in the equipment, I had no idea that they had different uses. I will def. read into it.

I just have mine on with a crush washer and it hasn't moved. Blue Locktite I think would be fine if it keeps moving around

 

[ragingyeti]

So I was looking through this thread again, and realized I made a mistake. the YHM you listed is both a muzzle brake and flash suppressor. It serves both purposes. I was thinking of the 5M2, not the 5C2.

Probably not a big difference to you, but I just wanted full disclosure, haha.

 

[Redbulladdikt]

So I was looking through this thread again, and realized I made a mistake. the YHM you listed is both a muzzle brake and flash suppressor. It serves both purposes. I was thinking of the 5M2, not the 5C2.

Probably not a big difference to you, but I just wanted full disclosure, haha.

i caught this as well...and yes you are correct however on a 22 LR it just looks purdy

 

[tacticool22]

1/2-28x5/8 fit my brakes perfectly.

 

[Pineapple]

Go to shopwilsoncombat.com, then enter "flash hider" in their search box.
Prices range from $11 - $76 plus flat rate shipping @ $7.95. The good news is that you don't need a gunsmith to do the installation.