picked up a 67-1 today

[Cotis]

I have wanted one of these for years, just because. Never could find one locally. Picked this up from a nice gentleman near the TN river on a drive home from Nashville today for $550, I feel it was a fair deal for both of us. Made in 1978, hasn't been shot in 15+ years and never much before that. Came with a Bianchi #16 left handed holster (perfect for me, that never happens!) and 100 rounds of some company's reloads that will be good for the brass. The grips definitely need to go, haven't decided what I am going to replace them with yet. Seller's FIL went at the left grip with a pocket knife it looks like, guessing he was trying to relieve it for easier reloading maybe? I know it came from factory with magnas, but they are small for me even with my puny hands. Thinking maybe some wood targets, smooth combats would be awesome but I can never seem to find any. Suggestions?


I already have it completely disassembled, parts soaking in Hoppes #9. Also conditioned the leather holster, I doubt it has ever been done. I will put a spring kit in it as the DA pull was not good at all, which was surprising. Crane is nice and straight, excellent forcing cone, no push off on trigger. Insides are clean, but dried varnish-like stuff under top strap and inside cylinder/yoke area which made cylinder not spin as free as it should. Will clean up easily though.

 

[Cotis]

I found some Magna grips from my model 15 in the drawer. I think they look pretty good on this model 67, so I will probably try them out for now.

 

[Birdhunter6]

Beautiful! Thanks for showing it to us.

Mine is a No Dash, and more likely to appear at the range than any other revolver I own. Please share a range report.

 

[Bald1]

Hmmmm last two model 10 police guns I bought came with left handed duty holsters. Does me ZERO good.

 

[bigmoose]

The 67-1 is one of my favorites. Find a pair of Herrett's Shooting Stars. You won't be disappointed. Congrats on a fine purchase.

 

[AveragEd]

Visit eBay and search for "S&W K wood grips" and you'll see some very nice copies of S&W combat and target stocks made in Thailand. Honestly, they're almost nicer than factory and cost a lot less. Here are some combats, square and round butt. You'll also find ones without a glossy finish.

Ed

 

[Buzzzer]

Congrats on the purchase! The most accurate handgun I've ever owned. I'm sure you'll enjoy it!

 

[minconrevo]

The Mod 67 is a fine shooter, balanced to boot. I like Miculek grips as they are convenient to reload around, offer a quick solid grip and conceal carry well. They point naturally well.

As a 2nd choice, a grip adapter may work okay with your wood magna's.

 

[Ingramite]

Congratulations on the acquisition of your new Model 67.
Mine is my most favored. I carry it often.

 

[gmborkovic]

OH yea, those Magna grips look much better.

 

[ColumbusJBR]

As far as looks go, I've always loved the look of Magnas. Underrated IMO

 

[Cotis]

The 67-1 is one of my favorites. Find a pair of Herrett's Shooting Stars. You won't be disappointed. Congrats on a fine purchase.

I would love to find a pair of these! I own a set for a J frame, got them with a model 31-1 I purchased from a fine member here last summer.

 

[71vette]

I lucked into a no dash 67 with stainless sights about this time last year. It's probably my favorite wheel gun to shoot. I settled on early diamond magnas with a Tyler T.

You did good OP!

Mine:

 

[press-1-for-english]

My 67-1.
It is the most accurate and tightest revolver I own.
Congrats on your purchase.

 

[press-1-for-english]

Cotis, as a fellow lefty I am always happy when I can find a good old holster.
Here's my OG Bucheimer B845 S LH

 

[SGT ROCK 11B]

Made in 1978, hasn't been shot in 15+ years and never much before that ...

... I will put a spring kit in it as the DA pull was not good at all, which was surprising.

Insides are clean, but dried varnish-like stuff under top strap and inside cylinder/yoke area which made cylinder not spin as free as it should. Will clean up easily though.

You know it was not shot much in 45 years. With revolvers people are lazy and never think it is a tool and it needs to be cleaned and lubed.

Being one of the last revolver issued cops on my PD. People bring me their dad's or their grandpa's revolvers. Usually the revolver just needs a good cleaning and a lube.

Also I am not a fan of "Spring Kits" unless it is just a "Range Gun" because I know several shootings were the cop's revolver did not fire because he did a poor job of installing a "Spring Kit".

 

[Cotis]

Also I am not a fan of "Spring Kits" unless it is just a "Range Gun" because I know several shootings were the cop's revolver did not fire because he did a poor job of installing a "Spring Kit".

The DA pull did clean up some after the disassembly, thorough cleaning, and proper reassembly. The mainspring wasn't centered within the frame, it was dragging on one side of the grip. I do not plan on carrying this revolver for self defense, mainly hunting and range work. I may still swap the rebound spring to 1lb lighter and the mainspring also. I have had success with the inexpensive Wilson Combat blister pack kit.

 

[Baxter6551]

OP - excellent acquisition. It will be a great gun for you.
My 67 no dash was a former issue gun somewhere evidenced by issue number stamped on it followed by a second career with an armored car company. I bought it there when they were getting rid of assorted other guns and replacing with model 65s. It was in bad shape cosmetically. Think I paid $125.00 as I recall. My gunsmith did a complete makeover similar to the factory Combat Revolver Package (highly recommend) and polished the face of the trigger smooth. As others note it's a very accurate gun and a great shooter.

 

[27 Man]

You have a great revolver and those Hogue grips really make it pop. My old 15-2 is a favorite of mine. Those old 4" K frames seem to have a perfect balance in my hand.

 

[Mstorm]

I have a 67-1 as well and it is a truly well balanced awesome shooter, Congrats on your purchase, you're gonna love it.