Helping a friend who is ill sell off his high end knife collection. He has dropped his prices and is accepting offers on these. I am posting a couple of pics of each and upon request will give you a link to more pics of the knife of your interest. Price for knife listed above pic. Payment by paypal or USPS money order.
Sold Item 1-
Charles Clifton , Georgetown KY. , maker. 5/32" 440C blade,hollow grind,mirror polish. Tapered tang,red liners,mosaic pins. SS guard,snakewood handle scales. 7-3/4" OAL with 3.5" blade,3.25" cutting edge. Fancy sheath,made & stamped by maker,is right side vertical belt loop carry,fancy sheath with snakeskin overlay & rawhide dangler. Older knife,pre owned,un used,great shape.
$150 Shipped.
Sold Item 2-
Mike Malosh,gorgeous large hunter. Stag & leather handle,palm swell feels great. Full convex grind. Forged O-1 steel,5/32" thick at the ss guard. 10" OAL,5-1/8" blade,5" of cutting edge. Condition is pre owned,un used,excellent+. Jack Mosher tooled heavy leather sheath. An awesome combo
Mike Mallosh $350 shipped.
Sold Item 3-
Gorgeous knife & sheath by this J.Neilson. Very ,very well done. 10" OAL knife. Laminated card with info & please consider it spec's. Ships with a storage case that holds the knife inside & the sheath on the outside with a strap. Fantastic !
$350 shipped
Item 4-
Bob Neal,Monticello KY. ,maker. Amazing amber stag lockback whittler. SS blades ,makers stamp & '09 on blade tangs. Nickel bolsters,brass liners& pins. Awesome antique amber stag. Locks up on main blade like a vault. Two secondary blades half half stops,semi cam tangs. No blade play,no rub. Amazing fit on this knife,a rare find here, 4" closed,thin & compact. Never sharpened,very excellent pre owned un used condition.
$400 shipped.
SOLD Item 5-
H.L. Holbrook , Sandy Hook KY. ,maker. RT model 4 Drop point.
Blade steel 3/16" stock CPM -154 ss,1000 grit hand rubbed finish,Jimped spine. Figured desert ironwood with red liners & 1/4" mosaics pins. 1/4" ss lanyard hole tube is 304ss.
Bolster is 416 ss hand rubbed 1000 grit finish. Full tapered tang,dovetailed bolsters. Rc 60-61 w/ cryo quench.
Razor sharp hollow grind. RH vertical cowhide belt loop by maker. The finest hunter right here. Condition is previously owned,un used ,excellent. 8-3/8" OAL , 3-3/4" blade , 3.5" cutting edge.
$275 shipped
Sold Item 6-
This knife is pre owned,un used,out of a collection. By David Steier.I do believe it is this maker's earlier work. Condition is very good,with only a few faint handling marks on the bolsters,I do not believe they show up,nor can I capture them with my photography skill level. Also,the blade has a mirror like finish,there are no scratches on it,rather reflections & finger print/oil smudges. The burl scales are gorgeous,I just do not know what they are. I think liners,lock bar,screws,& bolsters & pin is ss. The bolster has a nice satin finish. Locks up nice,smooth,blade centers. Fileworked backspacer & that is probably ss too. The blade is 1/8" thick stock ATS-34 with a double edge clip grind,top edge is not sharpened. Makers mark is visible but one side is lighter that the other. Thumbstud for a righty. Closed size is 4-3/8" with a 3" blade,2-3/4" of cutting edge. Opened up it is 7.5". Closed,the blade has a decent "detent". Very classy folder.
$175 shipped
Sold Item 7-
Matt Watkins , Youngstown N.Y. , maker M-4 steel, 1/8" thick. OAL 5-3/8' with a 2.5" blade,2.25" cutting edge. Stout & sharp compact knife. Kydex sheath by maker has holes for 3 positions of carry. Jimped spine. Hard wood scales with brass pins. Condition is previously owned,un used,very good. Obne small scratch on blade from the kydex,can be seen in the pics.
$100 shipped
Sold Item 1-
Charles Clifton , Georgetown KY. , maker. 5/32" 440C blade,hollow grind,mirror polish. Tapered tang,red liners,mosaic pins. SS guard,snakewood handle scales. 7-3/4" OAL with 3.5" blade,3.25" cutting edge. Fancy sheath,made & stamped by maker,is right side vertical belt loop carry,fancy sheath with snakeskin overlay & rawhide dangler. Older knife,pre owned,un used,great shape.
$150 Shipped.
Sold Item 2-
Mike Malosh,gorgeous large hunter. Stag & leather handle,palm swell feels great. Full convex grind. Forged O-1 steel,5/32" thick at the ss guard. 10" OAL,5-1/8" blade,5" of cutting edge. Condition is pre owned,un used,excellent+. Jack Mosher tooled heavy leather sheath. An awesome combo
Mike Mallosh $350 shipped.
Sold Item 3-
Gorgeous knife & sheath by this J.Neilson. Very ,very well done. 10" OAL knife. Laminated card with info & please consider it spec's. Ships with a storage case that holds the knife inside & the sheath on the outside with a strap. Fantastic !
$350 shipped
Item 4-
Bob Neal,Monticello KY. ,maker. Amazing amber stag lockback whittler. SS blades ,makers stamp & '09 on blade tangs. Nickel bolsters,brass liners& pins. Awesome antique amber stag. Locks up on main blade like a vault. Two secondary blades half half stops,semi cam tangs. No blade play,no rub. Amazing fit on this knife,a rare find here, 4" closed,thin & compact. Never sharpened,very excellent pre owned un used condition.
$400 shipped.
SOLD Item 5-
H.L. Holbrook , Sandy Hook KY. ,maker. RT model 4 Drop point.
Blade steel 3/16" stock CPM -154 ss,1000 grit hand rubbed finish,Jimped spine. Figured desert ironwood with red liners & 1/4" mosaics pins. 1/4" ss lanyard hole tube is 304ss.
Bolster is 416 ss hand rubbed 1000 grit finish. Full tapered tang,dovetailed bolsters. Rc 60-61 w/ cryo quench.
Razor sharp hollow grind. RH vertical cowhide belt loop by maker. The finest hunter right here. Condition is previously owned,un used ,excellent. 8-3/8" OAL , 3-3/4" blade , 3.5" cutting edge.
$275 shipped
Sold Item 6-
This knife is pre owned,un used,out of a collection. By David Steier.I do believe it is this maker's earlier work. Condition is very good,with only a few faint handling marks on the bolsters,I do not believe they show up,nor can I capture them with my photography skill level. Also,the blade has a mirror like finish,there are no scratches on it,rather reflections & finger print/oil smudges. The burl scales are gorgeous,I just do not know what they are. I think liners,lock bar,screws,& bolsters & pin is ss. The bolster has a nice satin finish. Locks up nice,smooth,blade centers. Fileworked backspacer & that is probably ss too. The blade is 1/8" thick stock ATS-34 with a double edge clip grind,top edge is not sharpened. Makers mark is visible but one side is lighter that the other. Thumbstud for a righty. Closed size is 4-3/8" with a 3" blade,2-3/4" of cutting edge. Opened up it is 7.5". Closed,the blade has a decent "detent". Very classy folder.
$175 shipped
Sold Item 7-
Matt Watkins , Youngstown N.Y. , maker M-4 steel, 1/8" thick. OAL 5-3/8' with a 2.5" blade,2.25" cutting edge. Stout & sharp compact knife. Kydex sheath by maker has holes for 3 positions of carry. Jimped spine. Hard wood scales with brass pins. Condition is previously owned,un used,very good. Obne small scratch on blade from the kydex,can be seen in the pics.
$100 shipped
Last edited:
