Powder Trickler

[jwr0201]

So far I've been using powder dippers in my reloading and have had good success, but it is sloooow going. I'd like to know if there would be any advantage to use a powder trickler for fine adjustments rather than carefully going with the dippers. I'm using a single stage press for handgun loads (38 & 357).
Also, what's the best / easiest to use / most reliable trickler you all recommend?
Thanks,
RR

 

[PH-2]

RR,

I've tried a couple, they were 'bought the same. I'm currently using the rcbs when I use a trickler. I use the same outfit's Chargemaster exclusively for rifle rounds. It's last action is a slow trickle up to the desired throw weight. Depending on powder, it's either right-on or within .01gr.

Mike

 

[Rule3]

So far I've been using powder dippers in my reloading and have had good success, but it is sloooow going. I'd like to know if there would be any advantage to use a powder trickler for fine adjustments rather than carefully going with the dippers. I'm using a single stage press for handgun loads (38 & 357).
Also, what's the best / easiest to use / most reliable trickler you all recommend?
Thanks,
RR

If using the Lee dippers "correctly" you should not have to trickle.

Pour your powder in a wide mouth cup or bowl. Scoop the dipper (do not tap or shake it) then take a straight edge like a business card or credit card and level off the top.

You should not need to weigh each and every one once you establish the correct size dipper.

If you do not have a dipper the exact charge you want, take the next larger size and carefully file, sand it down to the hold the exact charge you want. You can also make your own out of a spent brass case and glue a small handle to it. I have several "custom" made ones.

 

[Steve in Vermont]

I have a Lyman EZ Flow and like it very much. Adjustable for height and has a sturdy (rubber) base. Hint: It's hollow, you can twist the top and bottom to open it. Then place an ounce or so of lead shot inside and seal it up. Adds weight and makes it even more stable. It even has an extension for added reach.

 

[Mike_in_VA]

One thing, digital scales may not work properly with a stand-alone trickler. It's something to do with what looks like an automatic hold funciton, once a steady weight is reached. Beam scales work better.

The digital scale/trickler combo units don't have this problem.