Problem with spray paint

Joined
Jul 24, 2018
Messages
3
Reaction score
1
Hello all.
I've spray painted my 15-22, very happy with the results, until....

mags kinda stick, and don't just fall when the mag release is engaged. I'm afraid i've used a bit too much spray paint and the mechanism is a bit gunked up. Anyone had the same problem? Any particular way / solvents to un**** this?
Thank you so much.
 

Attachments

  • IMG_8474.jpg
    IMG_8474.jpg
    60.3 KB · Views: 125
Register to hide this ad
I would just let the paint dry and cure completely and repeatedly insert and drop out mags and see if it eventually loosened up. I would think it would wear away eventually. If that failed I would get a rag and dip it in turpentine or mineral spirits (paint thinner is the same stuff BTW) and wrap it around my finger and rub it around inside the mag well.
 
I spray paint my mags too and found they stick and require a tug to get them out, however the more I use them the easier it gets.
I should add they would kind of stick in the well before painting, I also want to add your camo pattern looks bad ***!
 
Keep,in mind that spray paint may dry to touch in a couple of hours but it takes several days to cure hard!
 
Back
Top