Quality folding knife recommendations?

[Protected One]

Though I carry a gerber folding pocket knife every day (as a utility tool), I admit to not knowing much about knives. When I took my concealed carry class the instructor recommended getting a "quality knife", like benchmade, but I couldn't justify the price.

Now, many years later, and seeing how some knives lose their edge quickly while others aren't as durable, I would like to know 'what determines a quality knife? Which maintain their sharpness the best, and - not anticipating needing it as a fighting tool...which do you recommend?
Price has become much less a factor for me.
Thanks everyone!

 

[Donn]

Buck 110, the pioneer and still the yardstick all other folders are measured by. It has a proven track record as well as an excellent warranty. You could spend a lot more, but why?

 

[03gringo]

Just my opinion, and that is worth just what you paid for it (nothing). I recommend the following brands, Benchmade, Benchmade and Benchmade. They are made in the USA, are razor sharp right out of the box, tend to stay sharp, and the manufacturer will re-sharpen, oil and adjust them to new condition for free.

 

[growr]

I carry the counter-part to the Buck 110 made in USA by Schrade, Uncle Henry and Old Timer....the LB7.

Randy

 

[6518John]

Zero Tolerance Hinderer 0566. Titanium. You will never need another knife.

 

[cd228]

If your gerber does everything you need it to, holds an edge, and can be resharpened to a good edge, then what makes it a non-quality knife?

Back to your question, what makes a "quality" knife quality? I'd say start by saying suitability to to the desired task. If the knife isn't getting you the results you need, it doesn't matter how many features and wunder metal the engineers and sales guys can cram into it. Always start with what you need it to do and the features you actually need it to have.

More towards the answer I think you are looking for, the spyderco endura and delica are "quality" knives that can be had for under $100. They are good quality steel, decent grips over a metal liner and a solid lock. I like the liners because they strengthen the knife handle. A solid lock, positive lock is important because you don't want the blade to close on your fingers. I've seen locks on cheaper folders unlock when griped. The spyderedge serrations can be difficult for a beginner to sharpen. They can be put into operation with one hand and can be clipped to a pocket or inside a waist band. The last two could be relevant for defense, imagine trying to defeat a gun grab. Your strong hand will most likely be on the grip or trying to retain your gun, so you can't use both hands to open your knife. Buck, Gerber, ZT, Camilus, etc. all make similar knives. Benchmade makes a great knife, but they aren't the only game in town anymore.

 

[Johnnu2]

Buck 110 or any of their models.... here: Factory Exclusive Buck Knives

I know nothing about knives, but I do know that you will be overwhelmed with technical, and price/performance, info. Personally, I would take the easy way out of your purchase question; buy TWO Buck knives for the price of one of the "up town" brands. Keep one in your desk drawer in the event that the first one breaks before you do. Then, just open the drawer and put the brand new replacement in your pocket for the next 50 years )) Oh, yeah, buy a 'plain vanilla' electric knife sharpener and keep it in your workshop. One more thought: I don't recommend bringing a knife to a gun fight...

As always IMHO,
J.

 

[OLDSTER]

Buck 110. Mine's 37 years old .

 

[s&wchad]

Gerber made some great knives and still makes some good ones today. Which Gerber do you have?

You’re going to receive countless suggestions. Today’s market is flush with really good production, semi-custom and custom manufacturers. Material, fit, finish, design and the reputation of the maker all come into play when determining the value of a knife. You can spend under $30 for a carbon steel Opinel and you can spend around $2000 for a Marfione custom. Both will do a fine job of cutting.

I see you’re a fellow Michigander, which means you can now legally carry certain automatic knives (switchblades). Benchmade, Spyderco, ProTech, Microtech, Rat Worx, Gerber and Kershaw all make quality autos in various price ranges. My EDC is a Benchmade CLA, which has a 154CM blade and a G10 handle. It’s tough to beat for around $200.

 

[Golphin]

Carbine steel is harder, holds a edge longer and is easier to sharpen than stainless and is my preferred blade. I like USA made Case knives myself. Bear and Son's also makes a nice USA made knife.

 

[JM4151]

EDC Knife

I have two Buck model 290's knives that I am pleased with. They have a blade that is under 3 inches in length, and a lock on the plade to keep it from opening in your pocket, but also can be opened with one hand. In my opinion the Buck 112 is also a very nice knife.

 

[gunsnrovers]

Lots of decent production knives mentioned above.

I have a very modest collection of customs and semi-customs. Ernie Emerson, Tom Mayo, Rick Hinderer, Chris Reeves, Brian Fellhoelter, etc., but my everyday carry is a basic little Opinel #8.

If I lose it, I sets me back $12. Easy to keep razor sharp, carries super light when I'm in dress pants for work, and doesn't scare folks when I pull it out to cut something.

Have had this one for a few years now

 

[BAM-BAM]

Benchmade makes nice knives...........my EDC is a 2.9" Northfork with wood scales IIRC about $150 ...... very untacticooool looking.

For weekends and folding "hard use" knife I've settled on the Kershaw Blur at about $65 3.4" drop point blade, assisted opening for when the other hand is occupied..... not to expensive to loose or beat up

 

[Sarge9]

You must know what you want in a knife: blade material, assisted opening,
blade shape (tanto), length of blade, US made, ect.
There are several good knife companies today.
Check out Blade HQ or Knifecenter. I think most knife people have a large
collection, and will select one for each days task, or occasion.
I prefer SOG, tanto, speed safe, 3", US made myself EDC.
Maybe William Henry for that special night. Lot to chose from today.

 

[ContinentalOp]

First off, Gerber makes good quality knives. If the one you have meets your needs/wants, it should be a fine choice.

But since variety is the spice of life...

I'm a fan of Spyderco knives. I've got three Delicas, one shortened to 2.5". The Endura is also a good choice if you want a little longer blade. They're light, slim, easy to open and close with one hand, and they can be set up for either left or right hand pocket carry, tip-up or tip-down. I like the VG10 blades, holds an edge but also easy to sharpen. They make a variety of other folding knife options, too. For less expensive options, there's the Tenacious or Persistence.

Kershaw has a solid reputation for producing a lot of knife for the money. Been thinking about getting one of their Kershaw/Emerson knives, as I like Emerson folders (used to have 3 of them).

CRKT has some solid choices for the money.

If you can get an auto knife, I've become a big fan of the Boker Plus Strike. It's been my EDC knife for over a month now. It's typically about half the price of a Delica. Boker makes some good regular folders, too.

And, of course, Benchmade makes some excellent offerings and has a solid reputation for customer service. I had one where the Axis lock spring broke. I sent it to them and they not only replaced the spring, they cleaned and sharpened it, no charge.

I don't carry a folder for self defense, but these knives are good for EDC purposes while also being able to fill a defensive role if necessary.

As has been said, you're going to get a lot of different answers from members, likely none of them bad choices. You'll have to figure out what style, features, etc. you want, and what budget you want to work within, and go from there.

 

[YkcorCal]

Though I carry a gerber folding pocket knife every day (as a utility tool), I admit to not knowing much about knives. When I took my concealed carry class the instructor recommended getting a "quality knife", like benchmade, but I couldn't justify the price.

Now, many years later, and seeing how some knives lose their edge quickly while others aren't as durable, I would like to know 'what determines a quality knife? Which maintain their sharpness the best, and - not anticipating needing it as a fighting tool...which do you recommend?
Price has become much less a factor for me.
Thanks everyone!

The one I carry most and would recommend most is a Spyderco Yojimbo 2 you can get it in a black blade now also for a folder. If you live where you can carry a small fixed blade its fixed blade twin the Spyderco Ronin 2 is my favorite. Both these knives were designed by Michael Janich a knife fighting expert who founded Martial Blade Concepts (MBC) and Counter-Blade Concepts (CBC). For a full sized fixed blade I love my Cold Steel Master Tanto. It works as a slasher, piercer, and holds a razor edge. My backup folder is a Black Talon 2.

Spyderco: Yojimbo 2 - Black Blade

Ronin 2

For a full sized knife I love my Cold Steel Master Tanto

My backup folder is a Cold Steel Black Talon 2 with a "Wave" feature open

 

[Narragansett]

Though I carry a gerber folding pocket knife every day (as a utility tool), I admit to not knowing much about knives. When I took my concealed carry class the instructor recommended getting a "quality knife", like benchmade, but I couldn't justify the price.

Now, many years later, and seeing how some knives lose their edge quickly while others aren't as durable, I would like to know 'what determines a quality knife? Which maintain their sharpness the best, and - not anticipating needing it as a fighting tool...which do you recommend?
Price has become much less a factor for me.
Thanks everyone!

First of all IMO what determines a quality knife is USA made. Not made somewhere else by a USA company. One of the saddest stories is Schrade going out of business in their 100th year. They had 3 generations working there at the same time. Schrade now is Taylor Cutlery out of TN. Made in China, like S& W junk. Also made by Taylor cutlery.

Now that I am past that, a folder has to be locking IMO. For folders I go on Ebay and find SP2 Schrade lockbacks. If you know how to sharpen, they will shave your arm. Benchmade and Kershaw also make some folders that will take a razor edge. Personally I could never get a Buck knife to maintain an edge. Gave all of mine away

So for me folding is Vintage Schrade USA lockbacks, also Kershaw, Switchblades are Microtech , Benchmade and Piranha. Fixed blades are standard USN issue Ka-Bar fighting knife.

Sorry for the rant

 

[Rpg]

I bought a Buck 110 in the late 1960’s and used it for years until I discovered the Gerber Sportsman II.

The Buck was generally a good knife: solidly built with a lock. The drawbacks are that: 1) the heavy, stainless stock blade is difficult to sharpen and, 2) it’s thick and over bulky for pocket carry.

The Gerber Sportsman II stainless blade is much easier to hone and it’s about 1/3 thinner than the Buck.

For a very short time, Gerber offered the Sportsman II with what they called a ‘V Steel’ blade: a hollow ground, carbon steel blade. The V Steel version is very difficult to locate but the very best lock back knife I’ve ever seen.

 

[BAM-BAM]

So for me folding is Vintage Schrade USA lockbacks, also Kershaw, Switchblades are Microtech , Benchmade and Piranha. Fixed blades are standard USN issue Ka-Bar fighting knife.

Sorry for the rant

As an aside..... the short 5" K-Bar fighting knife is a nice utility length blade, I also like their MkI 5" USN Deck knife; a little less tacticooool.

I do have a couple of the D2 Extreme Duty knives for Zombies!!!!

 

[k22fan]

Protected One,

I can't recommend a knife without knowing at least the general type that you like. Maybe you assumed we'd recommend a modern one hand opening single blade but those are not every one's cup of tea. I seldom even carry a knife with blade lock. Multiple blade shapes benefit me more than blade locks do. Locks are a little uncommon on multi blade knives. Used as a utility tool locks are frivolous but if you prefer a lock say so.

The one thing I did get out of your question is you prioritize edge retention. That makes the question which blade steels stay sharp longer. Blade steels with as high a carbon to iron content as milling machine cutters have great edge retention at the price of being harder to sharpen and if they're thin enough to be good slicers they snap when the ignorant use them for pry bars. There's no magic steel.

Please give me a little more to work with.