Removing Barrel Extension (chamber)

[reshp1]

I want to get my barrel re-parkerized after I buggered up the finish trying to get my flash suppressor off (and buggered up even more trying to touch it up with cold bluing). I'd like to remove the barrel extension before sending it to him since that part doesn't look like it was parkerized.

How hard is it to do? It looks like 2 roll pins holding it in. Anything to look out for (ejector tuning?).

Anyone done this have any words of wisdom for me?

 

[SimpleWeaponSolutions]

H & W Steel, Inc. 337-625-6828

I would just see if the shop that is doing the parkerizing can mask off the barrel extension instead of messing with it.

 

[Kayback]

Spray it with a spray can and forget about it. Spray the whole gun.

KBK

 

[Foxone]

cerakote is your friend.

 

[tacticool22]

The barrel is just blued, not parkerized. Just take it to a gunsmith and have them refinish the barrel with some sandpaper to get the original grooves back, or sand it to a finer finish, or sand blast it, then re-blue it.

 

[Brett248Vista]

I say gold plate it!

 

[Kayback]

I change my vote from spray paint to gold plating.

KBK

 

[heatedheavy]

I change my vote from spray paint to gold plating.

KBK

I also vote for gold plating!

 

[roadkill45]

I prefer Gold Webbing! Here's a Ruger Charger stock, metallic green w/gold webbing and clear coat!

Actually i would not spend the money, i'd just hit it with krylon and be happy, happy, happy.