Replace Your GunVault Battery

F

flat_topp

Member
Joined
Feb 23, 2013
Messages
127
Reaction score
43
Location
Illinois
Today I tried to open my GunVault, using my push-button code, and the door would not open. I tried several times with no success and then realized the two-year old 9v battery just didn't have enough juice to release the latch. Fortunately, I knew exactly where to find the backup key and used it to open the door. Good thing there was no emergency need for either of my pistols in that safe.

Lesson learned: Replace the battery more often than once every two years.
 
Register to hide this ad
Oh yeah... So many people forget about that. Lucky that you remembered where the backup key was! :)
Since it uses a 9v battery, perhaps you could get yourself on a schedule that when you replace your Smoke Alarm batteries, get one for the GunVault too.

There's a company called EBL that has rechargeable batteries, from AAA through D Cell and 9v. They also have a Universal Charger that handles all the sizes (including 9v). They sell via Amazon at a decent price.

Since I've gone rechargeable (with a spare set of each size), I haven't needed to buy batteries in years.
 
Also, be aware that Gun Vault had a bad batch of the little motor of solenoids or whatever the little device is in the vault that operates the lock when you key in the code.

You can tell if you have one if a fresh battery will still not open the door and all you hear is a "whirring" sound. They will replace the vault for free if you got one of those.

My belief, though not confirmed, is that if you have one with the single 9V battery, as opposed to the bank of AA batteries, then the vault is much newer than the range with the bad little motor or whatever opens that lock.
 
I'm loving my Gun Vault, only had it three months.

I used a 9 volt lithium ion battery which is suppose to last 10 years in a smoke detector. I try to open it as a matter of course every few days just for giggles, I'll keep an eye on the battery.
Thanks for the heads up.
 
Replacing the battery on a regular schedule is a good idea, but it is equally important NOT TO LOOSE THE KEY. Even with a new battery if the solenoid or keypad dies you're going to have to destroy the danged thing if you don't have the key to get it open. Keep that key in a nice secure accessible location!
 
You might want to look at some Google searches on how secure these safes are. I miss placed my key and using the paper clip method had mine open in 6 seconds. I now have heavy duty hasp on both of mine with heavy duty digital locks. Don
 
I change my battery the same day I change the ones in my smoke and gas detectors. January 1st, every year. And I write down the date on the batteries so I know it's fresh. I keep the older batteries for my kids toys and remote controls and whatnot. My gun vault has the AA batteries. Had it at least 5-6 years. Never failed to open, but I do put the key in the lock at bedtime to make opening it a guarentee. I store the key in my Fort Knoxx pistol safe. Fort Knox uses the simplex lock, far more reliable but not as easy to open under pressure.

Truth be told, I think all safes are pretty much useless. A thief who wants in is gonna get in. Unless we're talking high end high dollar safes, which I am sorry to say, I don't have. Hidden is better than locked in a safe. Wish my house was bigger. A false wall would be just the thing.
 
I never understood why anyone would bet there life on a battery working AND an electric motor operating in an emergency situation.

Firm believer in Murphy's law.
 
If you use a Gun Vault because of kids in the house there's an easy answer. Open it when you go to bed and lock it up in the morning. No problems if you have to get to the gun under pressure.
 
Thanks for the reminder. I lock my gunvault infrequently; only when the grandchildren are over. Normally I just have the lid down to keep the cat out. On rechargeables, be aware nickel metal hydride batteries lose their charge in storage, some as much as 15-20% a month, unless you have the LSD (low self discharge) batteries. For low usage, long storage applications, conventional alkalines are probably a better bet.
 
My barska biometric safe starts beeping when batteries are at 15 percent. I put lithium batteries in mine.
 
comiskeybum said:
My barska biometric safe starts beeping when batteries are at 15 percent.
Click to expand...

After reading your post, I decided to check my GunVault manual to see if it is supposed to have a low battery warning indicator. I have one of the "standard" models, and it does come with a built-in indicator (seven red flashes and seven soft beeps when a valid access code is entered). In my case, the indicator did not activate. Now I'm not sure whether I have a broken indicator, or the battery was not low enough to trip it.

In any case, I intend to follow the warning in the next paragraph in my manual which states the battery should be replaced "once a year regardless of whether or not the low battery indication is observed."
 
Can't the battery be replaced from the outside? The battery for my Liberty safe can be replaced without opening the safe. Also, it gives a low batt warning. Even so, mine gets replaced every 2 years whether it needs it or not.
 
Had the same thing happen to me about 6 months ago. I try to leave it plugged in as-well-as having a fresh battery in it.
 
Rastoff said:
Can't the battery be replaced from the outside? The battery for my Liberty safe can be replaced without opening the safe. Also, it gives a low batt warning. Even so, mine gets replaced every 2 years whether it needs it or not.
Click to expand...

The battery on the GunVault models cannot be replaced from the outside, so if the battery dies you will need to have your backup key to get it open.
 
tjhodges310 said:
Had the same thing happen to me about 6 months ago. I try to leave it plugged in as-well-as having a fresh battery in it.
Click to expand...

You must have one of the deluxe or biometric versions, with the external AC power supply. Mine is the cheaper standard version, with battery operation only (no AC power option). There is nothing for me to plug in.
 
I have two Fort Knox safes. One is larger than the other. It is set up for firearms, the other has just shelves. Both have electronic locks that use two 9v batteries each. The batteries can be replaced from the outside. I have been very pleased with both, and I think the contents are safe, pardon the pun.
 
I have a Barska finger print safe which also has a battery.

If the battery gets low, when you push the button to read the fingerprints it lets out a loud screeching tone.

But it still will open several times over the course of weeks so you have plenty of time to replace the batteries and still have access to the safe.

A good system. Uses several (6 or 8) AA batteries.
 
Last edited:
You must log in or register to reply here.

Similar threads

ImDrRich
I need to replace the BG2.0 Front Sight -
Replies
3
Views
368
Beju
B
J
I want to replace my M&P22 Compact's Sights.
Replies
2
Views
698
Thiokol
Thiokol
D
Tell me about your M&P 5.7
Replies
7
Views
1K
Old Navy
Old Navy
S
Anyone replace only the trigger body on their Shield .45?
Replies
5
Views
1K
SWBigBang
S
Terry G
Your M&P .45 Compact
Replies
12
Views
2K
Guevera
G

Latest posts

Back
Top