When I CCW a J frame I carry a speedstrip. With my K frame one speedloader and one speedstrip but that's my outdoors gun, the speedstrip carries shot loads while the speedloader has LSWC HP rounds.
Revolver carry Speedloader or Strip?
- Thread starter Frankie2blue
- Start date
I have used Safariland speedloaders since the 1970's, when I carried a revolver on duty. It's a very good design, and retains the ammo even when the loader is dropped in most cases. Always a good idea to have additional ammunition on hand and easily accessible.
Speedloader selection is based on personal preference for a particular design. Whatever you choose, be sure to practice with them regularly using snap caps. Take your speedloaders to the range for practice too, and be sure to confirm they work correctly, and fit your selected revolver properly. Don't "assume" your loaders fit your particular revolver, just because the loader is made to fit your model gun. Grip/stock designs can change dramatically among models, and this can affect the fit of the loader you have chosen.
Remember, loading under stress is very difficult. The more you practice, the better.
Speedloader selection is based on personal preference for a particular design. Whatever you choose, be sure to practice with them regularly using snap caps. Take your speedloaders to the range for practice too, and be sure to confirm they work correctly, and fit your selected revolver properly. Don't "assume" your loaders fit your particular revolver, just because the loader is made to fit your model gun. Grip/stock designs can change dramatically among models, and this can affect the fit of the loader you have chosen.
Remember, loading under stress is very difficult. The more you practice, the better.
Marshal Tom
Member
I started in 1971 when almost everyone carried a revolver as a duty weapon and some sort of a snub for back up and off duty. I am also a lefty who had to figure out how to manipulate a revolver with respect to reloading etc. I have carried speed loaders from Safariland and others over the years and now often carry a speed strip for my M&P 340 when just around the place or going to town. When carrying a larger K or N frame while out and about, I often carry at least one speed loader in a belt pouch for whatever I am carrying or I go to one of my many semi auto loaders instead and always carry at least one spare mag. The mag should be considered not as much as the reload for a protracted gun fight as it is for a malfunction or magazine failure. Same with a speed loader. I always carry something to reload the weapon I am carrying just because!
jcs266
Member
I carry my 3" 686+ daily with one speed-loader in a pouch just in front of the holster at about the 2:00 position. A speed-strip in left front pocket.
jerry52
Member
1 J frame and two strips or 2 j frames and one strip
J-frame 649 no strip on a normal day. occasionally I will carry a strip or two.
Yes, that. Usually. However, I have a standard, loaded speedloader staring me in the face every day so I imagine I'll start keeping that with me. I did have a wonderful strip but it's long gone. I think I might get another. Times being what they are it's probably time to have the extra ammunition. Or a BUG.
upcountrygirl
Member
I use speed strips for conceal carry, 2 speed loaders on the nightstand when I go to bed.
A 632 with Buffalo Bores in a Lobo holster and six extras in a strip in a leather carrier, both on the belt. An HKS speed loader would make for a faster reload, but I haven't found a belt carrier for a speed loader that's nearly as inconspicuous under my concealment sweaters as the little strip carrier. And frankly, if I really need more than the first 6 I'm probably in way over my head anyway.
Speed strips. But I will admit to not really practicing with them. I'm going to change that.
Woods carry is usually neither, but a leather belt fitted cartridge holder, you know the kind, with loop, like John Wayne had on his six gun belt. But it only holds 10 I think.
Woods carry is usually neither, but a leather belt fitted cartridge holder, you know the kind, with loop, like John Wayne had on his six gun belt. But it only holds 10 I think.
blues7
Member
When I carry extra rounds, I do it via Speed Strips.
Since my 642-1 is relegated to around home and walking distance, I often don't carry additional ammo.
Away from home, (town or further), I carry a different firearm.
Since my 642-1 is relegated to around home and walking distance, I often don't carry additional ammo.
Away from home, (town or further), I carry a different firearm.
Green Frog
Member
The Baby Chiefs Spl that has become my default CCW has 5 rounds of stand velocity lead SWCs in the cylinder. Sometimes I remember to throw a speed loader or strips into my kit, usually not. I generally try to avoid high danger areas though.
Froggie
Froggie
With my GP100 there's always a speedloader in my pocket, or a moonclip with my 325 or 625, always. Most importantly I spend time weekly on practicing reloads so that it feels second nature. You may think that you have the act of reloading down pat, but under extreme stress, perhaps rounds coming your way, both gross and fine motor skills are affected, as anyone here who has faced that can attest.
Train.....
....and then train some more.
And never say nil.
Train.....
....and then train some more.
And never say nil.
PI Rob
Member
OP
Frankie2blue
Member
A lot of folks carrying speed strips here. That said, who makes the best ones? I have heard if a couple of brands that tend to crack pretty fast and start falling apart, others that are too stiff or too bulky. I have no experience with them , though I have used speed loaders for years but hate trying to carry them around.
ContinentalOp
Member
- Joined
- Apr 14, 2009
- Messages
- 6,315
- Reaction score
- 12,813
I've been using Tuff Products Quick Strips for several years. They take a bit of breaking in, but after that they work pretty well. They've developed cracks after a few years of regular use, but I consider them consumables and just replace them as needed.
The best speedloader carry method that worked for me was JOX pouches. They're kydex pouches that ride above the belt, so bulk is minimized. They're very secure, but release the loaders easily when grabbed. They're not cheap, but worth the cost, IMO, if you want a concealable, secure, and accessible method for carrying speedloaders. YMMV.
