S&W 3rd Generation Decocker Models Disassembly

[bls]

I've disassembled the frame of traditional DA/SA 3rd generation pistols but have never disassembled a decocker model such as the model 1076.

I've studied the diagrams I can find of the decocker models and have visually looked over a field stripped frame and, other than the small circlip on the right side of the frame on the sideplate pin and the obvious absence of the sear release lever, don't see anything that appears to be a problem or troublesome during disassembly or reassembly.

However, before I start into the disassembly of a model 1076 frame, I thought I would check with the experts (hopefully someone that has actually disassembled a 1076) for any tips, techniques and/or recommendations that can make.

Thanks in advance.

bls

 

[handgunner356]

Tip #1; if you don't have to, don't do it! They are a pain in the *ss.

 

[bls]

Tip #1; if you don't have to, don't do it! They are a pain in the *ss.

I'm afraid I have to as this particular 1076 (as well as several other used S&W 3rd generation pistols I've bought lately) has a broken trigger play spring that I want to replace and I need to get the drawbar out of the frame to do that.