I just acquired a Smith and Wesson New Model number 3 with a 6 inch barrel and the caliber is unknown for sure at this time. Serial Number 18,525. Would any one of the experts here know the approximate date of manufacture for this weapon? Any help would be greatly appreciated. Thank you. PS I'm a brand Newby here. Thanks again.Mike from Rochester, Minnesota
Smith and Wesson New Model #3
- Thread starter killer73
- Start date
Register to hide this ad
Welcome to the forums from the Wiregrass! You are going to have to determine the caliber since all the different models began at SN 1. We can eliminate some because they didn't get up that high. Presuming it is .44 Russian, it likely shipped between 1883 and 1890. Also, you need to post some pictures so we can see if you have correctly identified it as a NM#3. Many folks mis-ID the Double Action models as NM#3.
Try inserting a .44 Special or .44 Mag into the cylinder. If it fits ok, we'll try to determine if it is .44-40 or .44 Russian, etc.
Try inserting a .44 Special or .44 Mag into the cylinder. If it fits ok, we'll try to determine if it is .44-40 or .44 Russian, etc.
Last edited:
Smith and Wesson New model Number 3
Thank you for the update. I haven't taken possession of the gun yet. I was the winning bidder on Gunbroker yesterday. It was GB number785503202. It should still be available for viewing. Please take a look and tell me what you think. I've ordered a letter of Authenticity from SW today. When it comes back, I'm going to order a Historical Research letter. The seller has absolutely no idea what the caliber might be. When I receive it, I'll get a handle on it. Thanks for the prompt response and any additional information would be greatly appreciated. Sincerely, Mike from Rochester, Minnesota
Thank you for the update. I haven't taken possession of the gun yet. I was the winning bidder on Gunbroker yesterday. It was GB number785503202. It should still be available for viewing. Please take a look and tell me what you think. I've ordered a letter of Authenticity from SW today. When it comes back, I'm going to order a Historical Research letter. The seller has absolutely no idea what the caliber might be. When I receive it, I'll get a handle on it. Thanks for the prompt response and any additional information would be greatly appreciated. Sincerely, Mike from Rochester, Minnesota
Nice ivories, congratulations! Looks like .44 Russian. .44-40 has a tapered rather than stepped cylinder. But, I'm no expert. Someone like model3sw will be along to give you the straight dope.
Smith and Wesson New model Number 3
Thank you for taking the time to look. I forgot to mention that I was virtually certain it was SW New model Number 3. I'm still in the dark on the barrel length though. It looks to me like a 6 inch barrel but it maybe a 6 1/2. I'd say .44 Russian is a good guess on the caliber. I like those Ivories too. Anyway, I just sent off the money today so it will be a while before I can put my hands on it. Once again, Thank you for your help. Sincerely, Mike from Minnesota.
Thank you for taking the time to look. I forgot to mention that I was virtually certain it was SW New model Number 3. I'm still in the dark on the barrel length though. It looks to me like a 6 inch barrel but it maybe a 6 1/2. I'd say .44 Russian is a good guess on the caliber. I like those Ivories too. Anyway, I just sent off the money today so it will be a while before I can put my hands on it. Once again, Thank you for your help. Sincerely, Mike from Minnesota.
I checked in here at the request of Guy, Wiregrassguy, who asked me to take a look at this for you, Killer73.
I hate to be the one to tell you ... unless that ends up being a Revenue Cutter Service. State of Maryland (US) or other unique or extremely scarce issue revolver, you paid about $2000 too much. That's a well worn, beat, parts gun if I ever saw one. I cannot determine if the guy running you up the flagpole with the bids is legit or not. You determine. I'm suspicious.
If you've got any way out of it, tell the seller you made a mistake and pay his auction charges to get out of it as eloquently as possible.
Is this is ? ( it is OK to like past / sold auctions here, just not pending auctions )
https://www.gunbroker.com/item/785503202
Next time, check in with us BEFORE you plop down that kind of cash.
PS: It is (was) a New Model 3 at one time. I cannot tell the barrel length but looks shorter than 6" at a glance but may be, however, he does not include any photos of the top roll stamp on the barrel. It might just be a clipped barrel but cannot tell for sure by what I see.
Any barrel length other than 6 or 6.5" is unusual. 5" and 8" are highly coveted but ONLY in upper condition ranges. Keep your eye out for the Blue Book of Antique Gun Values, 2nd edition that will be out in 2019. I'm doing edits on the S&W section for the publisher to the end of this month. And, buy yourself a Standard Catalog of Smith & Wesson 4th Issue / revision by Supica and Nahas. Can't go wrong there.
I hate to be the one to tell you ... unless that ends up being a Revenue Cutter Service. State of Maryland (US) or other unique or extremely scarce issue revolver, you paid about $2000 too much. That's a well worn, beat, parts gun if I ever saw one. I cannot determine if the guy running you up the flagpole with the bids is legit or not. You determine. I'm suspicious.
If you've got any way out of it, tell the seller you made a mistake and pay his auction charges to get out of it as eloquently as possible.
Is this is ? ( it is OK to like past / sold auctions here, just not pending auctions )
https://www.gunbroker.com/item/785503202
Next time, check in with us BEFORE you plop down that kind of cash.
PS: It is (was) a New Model 3 at one time. I cannot tell the barrel length but looks shorter than 6" at a glance but may be, however, he does not include any photos of the top roll stamp on the barrel. It might just be a clipped barrel but cannot tell for sure by what I see.
Any barrel length other than 6 or 6.5" is unusual. 5" and 8" are highly coveted but ONLY in upper condition ranges. Keep your eye out for the Blue Book of Antique Gun Values, 2nd edition that will be out in 2019. I'm doing edits on the S&W section for the publisher to the end of this month. And, buy yourself a Standard Catalog of Smith & Wesson 4th Issue / revision by Supica and Nahas. Can't go wrong there.
Last edited:
IIRC (without pulling books out) too high SN for a 44/40 frontier. That stocks may be bone and kinda tired and stained, too.
Yikes, I was pretty proud of that New Model number 3. It's exactly a 6 inch barrel and I believe its in .44 Russian. What specifically is incorrect with this gun? You've got me nervous. Really Nervous.Thanks again for the help. Mike
Smith and Wesson New model #3
Hmmm, What is a clipped Barrel? I know you are an expert but this gun looks original to me. The barrel is exactly 6 inches. The finish is brown but the screws are in good shape except for the side plate screw. The Gun is fully functional. My research indicates that this gun is in the ball park price wise. Can you give me an over view on this gun and tell me what is bad? I'd appreciate it. Yes the condition is fair but what is incorrect? I'm in need of your expertise.. Thank you Sincerely, Mike from Rochester, MN.
Hmmm, What is a clipped Barrel? I know you are an expert but this gun looks original to me. The barrel is exactly 6 inches. The finish is brown but the screws are in good shape except for the side plate screw. The Gun is fully functional. My research indicates that this gun is in the ball park price wise. Can you give me an over view on this gun and tell me what is bad? I'd appreciate it. Yes the condition is fair but what is incorrect? I'm in need of your expertise.. Thank you Sincerely, Mike from Rochester, MN.
Frontier ended with a 2072 serial number. As a reference to your question on value, I can provide some information given by a couple of premier experts on Smith & Wesson. Nahas and Supica published their 4th Edition of the Standard Catalog of Smith & Wesson, 2016 and the book details all models and values.
Looking at the images, the gun is in Fair to Good Condition by standard evaluation criteria. There is literally no finish left and roughened metal over much of the gun. The value of a Good Condition NM3 is $1100 and the value listed in Fair Condition is $900. Not sure if you paid $2000 over value, but you can make the comparison with what you paid and what it's worth. In order for a gun from 1890 era to get a Good condition rating, 30% of the original finish must be left.
Thank you for the reply. Those values that you quoted me are correct and of great assistance to me. Unless this Gun was shipped to Frank James in St. Joseph ,MO. I paid too much. It Looks like around $1400.00 too much at least. I'll work it out somehow or grow into it over the next 100 years. Thank you very much. Sincerely, Mike from Minnesota.
I can tell you that, based on historical values, this model has grown an average of 8.6% annually in value over the last 60 years. If the appreciation trend continues, it will double in value about every 10 years, so you are only looking at less than 20 year payback to profit.
I might add that if you are interested in continuing your adventures with Smith & Wesson, please purchase the book I mentioned above. Well worth the money and full of great reading. Every Model from the Model 1 up to today's current models, and everything in between.
I might add that if you are interested in continuing your adventures with Smith & Wesson, please purchase the book I mentioned above. Well worth the money and full of great reading. Every Model from the Model 1 up to today's current models, and everything in between.
Gary, the statistics you state I accept that you researched and did the math so I don't doubt you, however, for future values it will not continue. Only the upper grade antiques will maintain value, I feel.
There just aren't enough new collectors interested in the old guns anymore and the old collectors that appreciate them are dropping off in rapid succession.
I'll wager the NM3 the OP mentions is a shakey, loose, malfunctioning piece of iron, but, that is only my thoughts on it without examining it. Even if it were in excellent mechanical condition (which I strongly doubt), a $ 900 value (for what I see) is really pushing the envelope, I feel.
I sold one several months ago to a gent that needed one for parts. It showed much, MUCH, nice that this one and I felt guilty asking for $500 but it had $500 worth of parts on it, so, that's how I justified the value. Sal
Last edited:
Average annual value growth is independent of value. I am giving the OP's gun a better shake than you, but without inspection, we just do not know what is what. If a working well used NM3 was to sell in 1953, it would probably have been worth $20. A high condition NM3, according to early collector's guides would have sold for $50.
What would that gun have been worth 30 years ago? Let's say $200, or still an 8% AAGR. Sure the dollars are not there, but those excellent examples selling for $5000 to $10,000 are dragging the values of Fair & Poor condition guns up along with them.
I remember buying well worn Model 2 tip-ups for $75 to $100 in the late 1970s. You cannot find that same condition Model 2 for under 300 to $350. today. My view is that as prices on most sought after models get beyond what many collectors can afford, the value of lesser condition specimens rise faster than those high grade guns while slowing for those high priced examples. Anyway, my assessment is that accumulators and new collectors will continue to compete for those Good to Poor condition guns to fill holes as I did when I started out, pushing the prices yet higher.
What would that gun have been worth 30 years ago? Let's say $200, or still an 8% AAGR. Sure the dollars are not there, but those excellent examples selling for $5000 to $10,000 are dragging the values of Fair & Poor condition guns up along with them.
I remember buying well worn Model 2 tip-ups for $75 to $100 in the late 1970s. You cannot find that same condition Model 2 for under 300 to $350. today. My view is that as prices on most sought after models get beyond what many collectors can afford, the value of lesser condition specimens rise faster than those high grade guns while slowing for those high priced examples. Anyway, my assessment is that accumulators and new collectors will continue to compete for those Good to Poor condition guns to fill holes as I did when I started out, pushing the prices yet higher.
As you stated, this is an AVERAGE annual growth rate. I would expect the median is significantly lower. The high condition guns are probably exceeding the average, possibly significantly. Because of this, some of the "average" condition guns will increase to some degree, but probably unlikely to be as much as the average. The poor condition firearms are not increasing in value much, if at all, and might be losing value. Due to the disinterest in this stuff by younger generations, lower condition stuff has little upside.
Quality will always sell. A high condition firearm will always appeal to the firearms enthusiast. It will also appeal to the investor, even one who might be anti 2A. Why do you think some major auction houses are taking out full page ads in the Wall Street Journal just before an auction?
Gary, Another consideration is the annual average inflation of 3.48% per year over this time frame:
$1,000.00 in 1953 had the same buying power as $9,233.11 in 2018
See: Calculate the value of $1 in 1953. How much was inflation of $1 in 1953?
Last edited:
what the heck does inflation have to do with gun value? Im going to use this philosophy in the stock/bond market. I will give Buffet a run for his money. I gots enough to move west of the Turnpike in Palm Beach.
Hello to all my new neighbors.
Hello to all my new neighbors.
I did not want to depress the OP by including the negative changes in the value of the dollar over time. Nobody really wants to know that the buying power of one dollar from 1953 is now 11 cents.
Driftwood Johnson
Member
Good Grief, cut the guy some slack.
Yeah, he paid too much, but no use rubbing it in.
For what it's worth, I paid $1500 for this one last year, which I thought was a fair price. Very little blue left, the bare metal has faded to a dark brown. 6 1/2" barrel, 44 Russian.
The New Model Number Three was available in 17 different chamberings, however 44 Russian was the most common. Measure the length of the cylinder. 44-40 and 38-40 will only fit into a cylinder 1 9/16" long. Most had cylinders 1 7/16" long.
By the way, from what I can see the chambers look really nice and clean with no pitting. I'm going to take a wild guess and say it is probably chambered for 44 Russian. And I see no evidence of the barrel being cut. Compare it to mine. Measure it again, from the front of the cylinder.
Yeah, he paid too much, but no use rubbing it in.
For what it's worth, I paid $1500 for this one last year, which I thought was a fair price. Very little blue left, the bare metal has faded to a dark brown. 6 1/2" barrel, 44 Russian.
The New Model Number Three was available in 17 different chamberings, however 44 Russian was the most common. Measure the length of the cylinder. 44-40 and 38-40 will only fit into a cylinder 1 9/16" long. Most had cylinders 1 7/16" long.
By the way, from what I can see the chambers look really nice and clean with no pitting. I'm going to take a wild guess and say it is probably chambered for 44 Russian. And I see no evidence of the barrel being cut. Compare it to mine. Measure it again, from the front of the cylinder.
Last edited:
I see 50% blue with looking at that picture. Maybe it is the picture, but it is a heck of a lot better than “very little blue left”.
Similar threads
