(Sold on another site)
Available today is my S&W 327 TRR8. I bought this as a backup to my 627 but I'm moving away from revolver in USPSA so it's no longer needed.
The TRR8 is a scandium N-Frame chambered in .357 magnum with an 8-round capacity and 5" barrel. This particular gun has had a ton of work done by Pinnacle High Performance and is fully set up for competition. It has a ridiculously smooth action with about a 7lb trigger pull, minimal endshake, and the best cylinder locking/unlocking that I've ever felt. I've had zero ignition issues when running fully-seated Federal primers.
The gun has the following upgrades:
Also included are:
In terms of negatives, there aren't many to highlight. Most notable is I don't have the rail sections for the barrel or the factory cylinder release (the original seller never included them). I also staked the rear sight a little too heavily; it does move, it's just stiff. And obviously you'll be limited to Federal primers in order to keep the action turned down this low.
These guns are currently selling for $1,400+ when they're available and this one has another $700+ of work from Pinnacle (without the year-long wait) and other upgrades. I'm looking for $1475.00 and I will cover the shipping to your FFL (PP F&F only, please). Feel free to send me any and all questions and thanks for taking a look!
https://live.staticflickr.com/65535/52076688121_45ac7ac18b_b.jpg[/img
[img]https://live.staticflickr.com/65535/52076694608_8235c84cbb_b.jpg
Available today is my S&W 327 TRR8. I bought this as a backup to my 627 but I'm moving away from revolver in USPSA so it's no longer needed.
The TRR8 is a scandium N-Frame chambered in .357 magnum with an 8-round capacity and 5" barrel. This particular gun has had a ton of work done by Pinnacle High Performance and is fully set up for competition. It has a ridiculously smooth action with about a 7lb trigger pull, minimal endshake, and the best cylinder locking/unlocking that I've ever felt. I've had zero ignition issues when running fully-seated Federal primers.
The gun has the following upgrades:
- Premium action job (Pinnacle)
- Bobbed and polished hammer (Pinnacle)
- Polished and rounded trigger (Pinnacle)
- Remove cylinder endshake (Pinnacle)
- Straightened crane and ejector rod (Pinnacle)
- Chamfered cylinders (Pinnacle)
- Protocall Design fiber optic front sight (with a spare insert)
- Weigand enhanced rear sight
- Hogue boot grips
- Revo-Gear cylinder release
Also included are:
- C-More sight mount
- SpeedBeez holster on an aluminum holster hanger (note that I milled a hole in the side of the holster to be able to check/tighten the crane screw without drawing the gun)
- A mix of RSC moonclips (6)
- Gold bead front sight
- A few rebound spring options; one tuned by Pinnacle, one trimmed 11lb with a ball bearing. It currently has an untrimmed 11lb installed (I like a faster reset)
- A pair of new strain screws
- Factory case, paperwork, test round, safety key, etc
In terms of negatives, there aren't many to highlight. Most notable is I don't have the rail sections for the barrel or the factory cylinder release (the original seller never included them). I also staked the rear sight a little too heavily; it does move, it's just stiff. And obviously you'll be limited to Federal primers in order to keep the action turned down this low.
These guns are currently selling for $1,400+ when they're available and this one has another $700+ of work from Pinnacle (without the year-long wait) and other upgrades. I'm looking for $1475.00 and I will cover the shipping to your FFL (PP F&F only, please). Feel free to send me any and all questions and thanks for taking a look!
https://live.staticflickr.com/65535/52076688121_45ac7ac18b_b.jpg[/img
[img]https://live.staticflickr.com/65535/52076694608_8235c84cbb_b.jpg
Last edited:
