Taper Trigger
- Thread starter svlwolf
- Start date
Register to hide this ad
Have no idea what you mean....are you talking about making the trigger face narrower?
JohnHL
Member
The easiest method would be to simply replace it with a standard 3rd gen trigger which is already narrowed.
John
John
Last edited:
trigger
What is the width of the trigger you have now?
As far as I know there are two OEM trigger widths available, one is approx. the same width as the frame opening or .368", and the other has a slightly narrower face, .300-304".
If your 3913 has the "wider" trigger face you could purchase the narrower one. They are available at Numrich......
https://www.gunpartscorp.com/Manufa...ls-42024/39Series-35283/3913-34048.htm?page=4
If you want a face narrower than .304" you will have to modify it yourself, or take it to a qualified gunsmith.
What is the width of the trigger you have now?
As far as I know there are two OEM trigger widths available, one is approx. the same width as the frame opening or .368", and the other has a slightly narrower face, .300-304".
If your 3913 has the "wider" trigger face you could purchase the narrower one. They are available at Numrich......
https://www.gunpartscorp.com/Manufa...ls-42024/39Series-35283/3913-34048.htm?page=4
If you want a face narrower than .304" you will have to modify it yourself, or take it to a qualified gunsmith.
