Ten Ring Precision guns

[Rolandag2]

Ok folks let’s see all the Ten Ring Precision guns that people have post-’em if you got them

 

[RGNewell]

Are you talking about gun worked on by Ten Ring Precision?
Alex Hamilton?

Sent from my SM-N986U using Tapatalk

 

[JohnRippert]

Something like this M14 no dash with Sandersons?

Or this Officer's Model Match .38?

 

[Rolandag2]

Are you talking about gun worked on by Ten Ring Precision?
Alex Hamilton?

Sent from my SM-N986U using Tapatalk

Yes I am indeed


Sent from my iPad using Tapatalk

 

[Rolandag2]

Something like this M14 no dash with Sandersons?

Or this Officer's Model Match .38?

John, what work did he do for you.


Sent from my iPad using Tapatalk

 

[RGNewell]

Alex has performed his action / accurizing process on
Pre 27 5"
27-2 5"
29-2 6.5"
547 4"
66 ND 2.5"
640 Pro, my EDC
19 Texas Ranger
53
And maybe more, can't remember.

Sent from my SM-N986U using Tapatalk

 

[Bullet Bob]

Wished I lived close enough to drop some off, they'd be my first choice. I hate shipping, so that's on me.

 

[Rolandag2]

Wished I lived close enough to drop some off, they'd be my first choice. I hate shipping, so that's on me.

I dropped off 3 k frames model 66 f comp, model 10 357 conversion and model 10 Ohio highway patrol 357 conversion

 

[Rolandag2]

Alex has performed his action / accurizing process on
Pre 27 5"
27-2 5"
29-2 6.5"
547 4"
66 ND 2.5"
640 Pro, my EDC
19 Texas Ranger
53
And maybe more, can't remember.

Sent from my SM-N986U using Tapatalk

Some pictures please I’m trying to get an idea of what my guns are gonna look like

 

[JohnRippert]

John, what work did he do for you.


Sent from my iPad using Tapatalk

Sorry, I thought you were just talking about competitive shooting handguns. Not a specific gunsmith.

 

[RGNewell]

Some pictures please I’m trying to get an idea of what my guns are gonna look like

He didn't change the looks of any.

Sent from my SM-N986U using Tapatalk

 

[dave1918a2]

I don't think they will look like this. .45 muzzlestuffer. VERY accurate.

 

[Rolandag2]

He didn't change the looks of any.

Sent from my SM-N986U using Tapatalk

Ok difference of performance and functionality can you give a little write up, I’m sure other guys and myself will appreciate. It’s different when you get to read a write up from gun owners that have had gunsmith work performed

 

[RGNewell]

Ok difference of performance and functionality can you give a little write up, I’m sure other guys and myself will appreciate. It’s different when you get to read a write up from gun owners that have had gunsmith work performed

Here is the package.
He hones and polishes internal parts. Flattens ends of coil springs. Set SA and DA trigger pull. Checks cylinder barrel gap and head space. Re- crowns barrel and cuts forcing cone to 11 degrees. Cleans and polishes chambers and open throats if needed. Chamfers and numbers chambers. Lubricates and test fires. If the cylinder barrel gap is too great he will set back Barrel but thus is an extra $140.00 and cannot be done on some barrels.
Results.
Smoothness of trigger is vastly improved. Accuracy is improved, but most people, including me, can't out shoot the gun anyway. Ģroups are tighter for me anyway.
Hope this helps.

Sent from my SM-N986U using Tapatalk

 

[Rolandag2]

Here is the package.
He hones and polishes internal parts. Flattens ends of coil springs. Set SA and DA trigger pull. Checks cylinder barrel gap and head space. Re- crowns barrel and cuts forcing cone to 11 degrees. Cleans and polishes chambers and open throats if needed. Chamfers and numbers chambers. Lubricates and test fires. If the cylinder barrel gap is too great he will set back Barrel but thus is an extra $140.00 and cannot be done on some barrels.
Results.
Smoothness of trigger is vastly improved. Accuracy is improved, but most people, including me, can't out shoot the gun anyway. Ģroups are tighter for me anyway.
Hope this helps.

Sent from my SM-N986U using Tapatalk

Thank you RGNewell that definitely helps

 

[GM4spd]

This is at 50’. I’m 71 so I had two hands. Not a S&W but nice 60 year old Colt!

 

[raygixxer89]

Here is the package.
He hones and polishes internal parts. Flattens ends of coil springs. Set SA and DA trigger pull. Checks cylinder barrel gap and head space. Re- crowns barrel and cuts forcing cone to 11 degrees. Cleans and polishes chambers and open throats if needed. Chamfers and numbers chambers. Lubricates and test fires. If the cylinder barrel gap is too great he will set back Barrel but thus is an extra $140.00 and cannot be done on some barrels.
Results.
Smoothness of trigger is vastly improved. Accuracy is improved, but most people, including me, can't out shoot the gun anyway. Ģroups are tighter for me anyway.
Hope this helps.

Sent from my SM-N986U using Tapatalk

Does he do repair work? Like if a cylinder need to be timed, or crane work? Does he use non-mim replacement parts? I'd like to send a 66 so he can check it out.

 

[RGNewell]

He does it all

Sent from my SM-N986U using Tapatalk