Threaded spacer for break

[HiddenInTheWeeds]

I bought a break and the threads on it aren't deep enough for it to thread all the way back to the stop. Does anyone know of a 1/8" threaded spacer for this issue?

 

[hals1]

I bought a break and the threads on it aren't deep enough for it to thread all the way back to the stop. Does anyone know of a 1/8" threaded spacer for this issue?

Did you use a crush washer?

 

[copemech]

You will need a jamb nut setup. Ck JP ENT. for those in what is it, 5/8-24 thread.

 

[sgtsandman]

I would recommend a jam nut as well. I used on on my MVP and I would never go back to spacers or crush washers again. Timing the muzzle device is so much easier with a jam nut.

 

[MistWolf]

You mean a brake and what you need are shims

http://www.brownells.com/rifle-part...ashers/muzzle-device-shim-kits-prod60403.aspx

 

[tacticool22]

Use a crush washer. Even easier than jam nuts.

 

[Engine Earl]

Accu-Washer Muzzle Device Alignment System - Precision ArmamentPrecision Armament

1/2" & 5/8"