Victory Problem Child

[Targets Guy]

Okay ... here's what the issue was, got it back from SW. They replaced the slide stop as it had taken a beating when the barrel nut came loose. I had a rubber o-ring on it, but that was not enough to keep it tight.

Soo ... I'll add the wrench to my range bag and check it before & during & after use. I usually shoot 200 rounds at a time, have 1,200 rounds through mine thus far.

First thing I did was get five mags. Then I check the barrel after shooting 50 rounds and tighten IF necessary; I have to reload the mags anyway. O ring solved the barrel coming loose issue.

2,000 rounds and loving it.

 

[Barrie]

Another trick that you can do is torque the bottom barrel screw to 40 inch lbs when you apply the No. 61 O-ring on the barrel bolt. That will keep it tight until you want it off. Also keep a eye on the ejector as sometimes they can get slightly bent which you can straighten back out yourself with a small pair of needlenose pliers. CCI SV ammo is one of the more accurate bullets to shoot thru that pistol as well.