want to frequently change sights

[spssniper308]

hello to all, just signed up. bought my wife a 1522 and now trying to figure out the sights. i have a atn reflex with thmb screws and want approx a 3-9 scope for when she hunts, but still want to use the open sights at times. question is, can i buy a quick detatch mount for the scope, hand tighten the reflex sight and open sights, and keep the zero. this is a multi use gun that i want her to have many options. dont really want to put 45 deg rails and have all 3 on at once for weight reasons. dosnt seem that the recoil of this gun would need heavy torquing to hold the different sights. need a solution for now until i can buy her 2 more 1522s, lol. thanks for any input. also seen the nc quick detatch mount in sportsmans guide for $30, are these any good?

 

[jonrobertd]

As far as my experience goes, just remember where on the rails you mounted the sight at, and if the stop(screw on mount) was pushed to the front or back of the slot, your zero shouldn't change too much. All mine are still killing squirrels at 25 to 40 yards. Actual mileage may vary.

 

[MAD FALCON]

This is what i did so I could run many options. I got magpul flip sights so I can fold them down and use a scope, use the eotech I have on my ar, or use iron sights. I did have to get the right riser and rings for the scope to clear the rear flip sight but that isnt a big deal. I marked where im supposed to put the scope and eotech on the flattop with white paint dots so its always dialed in. Hope that helps

 

[Griffy19]

As far as my experience goes, just remember where on the rails you mounted the sight at, and if the stop(screw on mount) was pushed to the front or back of the slot, your zero shouldn't change too much. All mine are still killing squirrels at 25 to 40 yards. Actual mileage may vary.

Yea like jonrobertd was saying if you just remember where you had it it should stay zeroed. Larue makes index clips that cover the rail and make it easier to see where you're sight should go.

 

[Jubz]

Here are some open iron sights that mount on a 45 degree:

Dueck Defense :: Tactical And 3 Gun Competition Gun Sight System Developed by: Barry Dueck

 

[Rustpot]

Here are some open iron sights that mount on a 45 degree:

Dueck Defense :: Tactical And 3 Gun Competition Gun Sight System Developed by: Barry Dueck

For $240 I'd be happier with an offset red dot

 

[spssniper308]

thanks for the help.i was hoping this wouldnt be a difficult problem. mainly gonna be a fun gun for her. we both have bench guns when we shoot for straight accuracy.also will be a good trainer for me as to this is the type of weapon we sometimes use at work.

 

[Jubz]

For $240 I'd be happier with an offset red dot

Yeah, thought it was pretty steep in price also. I went with an offset red/green dot alongside a 4x32 scope myself.

 

[Jav]

I have a solution: Buy two M&P's

 

[Brett248Vista]

YouTube - How to mount your NcStar Mark III Scope (QD Mount)

That is the method I use to remove my scope, I've not had any issues holding zero.

 

[QuadCam]

YouTube - How to mount your NcStar Mark III Scope (QD Mount)

That is the method I use to remove my scope, I've not had any issues holding zero.

brett, firstly.....thanks for all the youtube videos.
, Secondly, on your ncstar 3-9 acog style scope, does it hold zero when changing the magnification level of the scope. I like the idea of variable power, but I have been told that I am better off getting a fixed power scope. What are your experiences?

 

[TJ...]

Not exactly a low cost option but you can buy a 3x Eotech magnifying scope and put that on the flip rail attachment that comes with it and all behind a standard Eotech red dot. Allows fast and easy movement between the two sights.

 

[spssniper308]

i think im going to check into the nc star mark III. i generally beleive in spending money on my optics, sometimes to much i think, but i like the way the scope mounts and apparently it is a fairly clear scope from the reveiws.hopefully will put a pic on here soon. thanks again for the help.

 

[chuck s]

There are some pretty good quick detach mounts that will work nicely on this no-recoil rifle.

I don't see a need for a telescopic sight on a 50 yard rifle and if you mount an Aimpoint clone properly it never needs to be removed to use the iron sights as long as the covers are open.

Here's the latest iteration of mine with no QD mount.

-- Chuck

 

[Baggerdude]

YouTube - How to mount your NcStar Mark III Scope (QD Mount)

That is the method I use to remove my scope, I've not had any issues holding zero.

Excellent vid, Brett .... I always enjoy your take on our gun. Thanx.

 

[JCKoLnturn]

There are some pretty good quick detach mounts that will work nicely on this no-recoil rifle.

I don't see a need for a telescopic sight on a 50 yard rifle and if you mount an Aimpoint clone properly it never needs to be removed to use the iron sights as long as the covers are open.

Here's the latest iteration of mine with no QD mount.

-- Chuck

Your setup is exactly the route I want to go, from the handle to the sight to the sling.

 

[Taranwanderer]

Ok, so a semi-related question: has anyone just taken their factory iron sights and mounted them on the right side rail? I had a scope mounted on the top rail when I bought the gun, but I thought it would be nice to still have an open sight for easier target acquisition close up. Anyone done this?

 

[Dragon88]

Wow this thread rose from the dead.

Ok, so a semi-related question: has anyone just taken their factory iron sights and mounted them on the right side rail? I had a scope mounted on the top rail when I bought the gun, but I thought it would be nice to still have an open sight for easier target acquisition close up. Anyone done this?

Yes. Not on the side right rail, but on a 45 degree angle mount. There are a few options out there, either sights with this feature built in, or angled mounts to hold whichever sights you want.

<This is obviously not me, just some Surefire ad>

 

[Taranwanderer]

OK, I see how the 45 degree open sight mounts, but at that point, why not just turn it another 45 and shoot it sideways? It's a no-cost option if you've already removed your iron sights for a scope, and this gun doesn't kick enough to affect your shooting 90 degrees CCW, does it?

 

[Dragon88]

I just tried a 90 degree rotation with an AR. The stock is not held in the shoulder well and feels awkward, it is slower to get to than a 45 degree tilt, the elbow is kicked up too high, the rear sight will be way too far forward, and it just looks dumb. But hey it's your gun, rock your irons on the side rail if that's what you want to do...