So I just picked up this gun, the previous owner expressed he put one mag through it, I was skeptical because how can anyone ONLY put one mag through this gun? The gun was super clean, not cleaned- like clean, new from the factory, w/ blue springs and all. I shot it for the first time the other day and it shot really well for the first 100rds, but then I started to have a lot of failure to feeds. The slide even dismembered one bullet from its casing. I would say my total FTF was 8, and 8 FTE. I was really bummed out, because I hate gun issues.
On to the weird part. I arrived home and prepared for cleaning by cycling the slide to ensure nothing was inside. Opened/closed bolt 7 times. When I removed the charging handle and bolt a shell casing came out and fell on the ground. Does that mean my issues were because a shell casing got stuck in the gun somewhere? I inspected the bolt and there was no scratching where the shell had been stuck and I dont even know where it could have been stuck as the shell fell to the floor. I am really hoping my gun issues were related to that casing and not much else.
The weird thing is I filled 2 mags at the end of the day and unloaded both rapidly with no issues. I was using a new gen mag and one old gen, but both had issues,
On to the weird part. I arrived home and prepared for cleaning by cycling the slide to ensure nothing was inside. Opened/closed bolt 7 times. When I removed the charging handle and bolt a shell casing came out and fell on the ground. Does that mean my issues were because a shell casing got stuck in the gun somewhere? I inspected the bolt and there was no scratching where the shell had been stuck and I dont even know where it could have been stuck as the shell fell to the floor. I am really hoping my gun issues were related to that casing and not much else.
The weird thing is I filled 2 mags at the end of the day and unloaded both rapidly with no issues. I was using a new gen mag and one old gen, but both had issues,