What parts to bring trigger pull down on a MA compliant Shield Plus?

[Rbp280z]

I’m in California and I bought a Shield Plus that’s MA Compliant with the 10 lb trigger pull. What parts do I need to change out to bring it down to the stock trigger pull of 5 lbs?

 

[lacerda023]

Take out all the red springs, Trigger return,Striker and sear. Replace with yellow sear spring, bronze trigger return spring and free state striker spring. It will reduce it to about 6-61/2 lb. If you want to spend the money also replace the sear with an Apex. They sell the sear without the springs or just buy the duty/carry Apex kit.

 

[ogso]

Search here for the 25 cent trigger job. M&P harder to pull apart than a Glock but polishing up the trigger bar, sear, firing pin release pin and finally the firing pin will reduce weight without changing springs. A quick youtube search showed a 10 pound trigger going down to 2.5 with polishing. I polished the top of the trigger bar and firing pin release pin with out breaking down the slide/frame and made the trigger feel smoother (sorry don't have measuring device). I also plan to remove the magazine safety just on principle.

 

[dbarro1976]

where could i find these replacement springs?

Take out all the red springs, Trigger return,Striker and sear. Replace with yellow sear spring, bronze trigger return spring and free state striker spring. It will reduce it to about 6-61/2 lb. If you want to spend the money also replace the sear with an Apex. They sell the sear without the springs or just buy the duty/carry Apex kit.

where could i find these replacement springs? i cant seem to find anything for the shield plus aside from a full apex trigger assembly. thanks

 

[Jim2527]

Midwestgunworks has two different sear and 2 different trigger return springs.

NP3 striker block from Overwatch, if it’s compatible.

 

[dbarro1976]

Thanks. I try as they are not that expensive and I’m desperate because this trigger is horrible although it seems nothing from the 1.0 or 2.0 are compatible with the plus trigger.