What Smith Have I Found Here?

[doc540]

Haven't been able to actually put my hands on it yet, but a local college kid has listed it for sale, asking $150 (due to the condition of the finish).

Serial number is 258214.

I'm guessing an old K frame, but don't know for sure. I think I see a barrel pin, but this is the only photo I have to work with at the moment.

Anyone here have the correct scoop?

Thanks

 

[ken158]

That is an old pre model 10 and worth the $150 asking in my opinion. Scads of them out there but that one looks like it will clean up nice.

 

[doc540]

Thanks, Ken.

I'll check the lock up and see if it cycles ok.

Might make a good truck gun.

 

[Class III]

It looks like it has been nickeled over blue or re nickeled to me, hammer and trigger appear to be nickeled, side plate screw holes dished by aggresive buffing (Behind trigger and just above trigger). Then it just may be the lighting throwing shadows. Still worth the $150 asking price.

Class III

 

[hiram2005]

Looks like a pre model 10 or a prewar M+P. If you are correct on the serial number and there is no letter prefix that is.
Also appears to have been nickeled after the factory as the hammer and trigger appear to be nickel. These were originally case hardened at the factory.

And I agree it's well worth the $150.

 

[doc540]

Gentlemen, I really appreciate your responses.

Just another example of why this forum is an asset to uninformed people like myself.

I did ask twice for the owner to confirm the serial number with no prefix.

 

[Art Doc]

Very early 4th Model, like 1917-1920.

 

[doc540]

And if I do acquire it and shoot it, I should only shoot standard pressure ammunition, correct?

Does Winchester White Box FMJ qualify as safe for this gun (assuming it's in good condition)?

Or should I just not intend on making it a shooter?

thanks again

 

[m1gunner]

Std velocity 158 gr LRN would be the right load for that old fellow.

 

[deanodog]

I would like to run onto that old fellow for 150.00

 

[Iggy]

It may be my imagination or the shadow in the photo, but it appears that the front sight may have been modified a bit.

Grips are probably after market.

That sure wouldn't dissuade me from buying it at the price mentioned.

 

[Targetslayer]

I looked up the pistol in my 3rd Edition Standard Catalog of Smith & Wesson and found on page 139 that it looks to be a .38 Military & Police Model of 1905 - 4th Change. It lists the serial number range 241704 - 1000000 with 758,296 manufactured c. 1915 - 1942. Price is $75 for poor, $135 for fair, $200 for good and up to $1200 ANIB. It does say that the square butt is scare. It's about a third of a page of information and I'm not that good at typing so I'm cutting it short.

Targetslayer

 

[Bajadoc]

I would buy that one just for the coolness factor. It is worth it. Standard velocity for shooting.

 

[doc540]

Thanks for the info.

I bought it.

The kid was savvy and held to his price.

I even tried the old "Well, this is all the cash I brought" trick.

Ended up going inside the hardware store nearby and getting another $20 cash with my debit card.

Serial number on the cylinder matches the frame.

Grips say: "Sports Inc. Chicago"

Barrel appears to have been shortened, front sight's been reinstalled, probably refinished in nickel.

Somewhere in the past someone fancied up their Smith. Imagine that?

 

[amazingflapjack]

I'm looking at the hammer, and the way it is set in the frame, as well as the barrel. Are you sure it's a .38? could be something else. Flapjack

 

[doc540]

I'm looking at the hammer, and the way it is set in the frame, as well as the barrel. Are you sure it's a .38? could be something else. Flapjack

Gee, I hope so.

The barrel's marked ".38 S&W Special" and I've loaded it with .38 Specials but have yet to shoot it.

 

[Dump1567]

Nice score.

Grips look interesting. What are they made out of?

 

[srgvaz]

Nice score.

Grips look interesting what are they made out of?

Plastic....

 

[29-1]

Not an expert on this but the stocks look a little like the seldom seen 'tuskoid' stocks S&W offered during the prewar years. Or, they could be Franzite?
Chuck

 

[doc540]

Not an expert on this but the stocks look a little like the seldom seen 'tuskoid' stocks S&W offered during the prewar years. Or, they could be Franzite?
Chuck

Franzite with the Chicago logo inside

Haven't had the thing a week, and already I've bought a set of correct period stocks and a grip adapter.

That's just what we do, isn't it?

 

[Mitch_D]

That's just what we do...

Right on, man. Nice Score.
I'll bet you will enjoy that one.

 

[donaldw870]

I looked up the pistol in my 3rd Edition Standard Catalog of Smith & Wesson and found on page 139 that it looks to be a .38 Military & Police Model of 1905 - 4th Change. ... It does say that the square butt is scare.

Targetslayer

That was an error that I've seen pointed out here. The square butts are not scarce.

 

[doc540]

Got a set of correct stocks today, but the grip screw didn't interchange with the Franzite's. That's my next project.

And, I think, I have a grip adapter coming that will fit. (crosses fingers)

 

[dacoontz]

Got a set of correct stocks today, but the grip screw didn't interchange with the Franzite's. That's my next project.

And, I think, I have a grip adapter coming that will fit. (crosses fingers)

Already a huge improvement. Those look good.

 

[doc540]

Found an old grip adapter, so let's go shootin'!

 

[Tslepebull]

If you get bored with it I'll drive down from Tyler and take it off your hands.

 

[doc540]

I don't know what I'm going to do with it, so you get dib's.


Why didn't you experts tell me there was a serial number under the barrel?

It has a "B" for "blue" in front of it.

So, it was originally blued and not nickel.

Learnin' something everyday about these fine old Smith's.

 

[Göring's S&W]

I'm sure someone did since you posted about this gun all over the place. Its common knowledge and for $150 its essentially does not matter. If this particular gun didn't function, it wouldn't have been worth $150 but it did function, which is why you bought it. Original finish means little with the barrel issue.

 

[doc540]

I'm sure someone did since you posted about this gun all over the place. Its common knowledge and for $150 its essentially does not matter. If this particular gun didn't function, it wouldn't have been worth $150 but it did function, which is why you bought it. Original finish means little with the barrel issue.

Do you, by chance, work in a pawn or gun shop?

 

[ElToro]

old guns that have used hard and have been altered to fit their owners needs have a certain "i dont know what" about them. if the price is right. i snapped up this cut down triple lock last year for $250. not much blue and a re-attached front sight and a rear sight that has been ground out a bit. but beleive it or dont it still makes cans dance at 15-25 yards