Where can I find a holster for my Model 10-7 with 2" Barrel?

[Snowbandit]

How about an original S&W holster speciffically for the 2 inch K-frame? Got one right here in front of me, marked B504L 32 on the back. It's not new but looks to be perfectable serviceable. Bottom is closed and holster is too short for a 2 1/2 inch barrel so it should be just what you're looking for.

 

[allglock]

How about an original S&W holster speciffically for the 2 inch K-frame? Got one right here in front of me, marked B504L 32 on the back. It's not new but looks to be perfectable serviceable. Bottom is closed and holster is too short for a 2 1/2 inch barrel so it should be just what you're looking for.

If you could post a pic. That would be great!

 

[Snowbandit]

I don't post many pictures so let's see if this works. I don't have any use for this holster but need one for a 6 inch K-frame myself if you happen to know of one laying around. You can have this one for whatever shipping is.

 

[allglock]

still looking for a beltslide with thumbreak

 

[Yellowstone]

I bought a pancake style from DeSantis but it was too long.... It said it fit 2" model 10. Do I have some kind of weird gun?
My barrel measures 2" from forcing cone to the end of the barrel, but only measures 1,1/4" from the frame to end of barrel.
I am really looking for a pancake style holster with thumbreak.
Thanks in advance for any help!

Part of the problem fitting your piece to a holster might be due to your "original" dimensioned M10. The current (later production) M10s have a slightly larger window in the frame and slightly longer cylinder, some might even with a 1/8th inch longer barrel. That will make the OAL longer. Standard makers try to put out a rig that'll fit all

When I tried to order a custom horsehide rig for a M10, the gun always was loose... enough to shake it out when held upside down. I talked to the maker and found that they had recently made a new mold for to the newer guns. They had an older gun and were eventually able to make one to fit.

If you get one built for you discuss this with the maker. That's a nice 10-7, I only have a 4 inch... but the barrel measures 4-1/4. Here it is next to a 10-5:

 

[Poohgyrr]

Look at the De Santis from RF holsters.

http://www.rfholsters.com/rfholsters/product.asp?dept_id=11&pf_id=DS-TBS

 

[Sportsterguy]

Give FIST holsters a visit. Quality, custom fitted holsters to your handgun at very good prices. He will make any holster to your specs. Very high quality rigs for the money!

FIST, Inc.

 

[haifabuddy]

+1 ON FIST. I posted about them several weeks ago. Tell them a guy from Miami, FL recommended them. Their #9 fits so close to the body I barely feel my L frame 3". Prices are well below others.

 

[baird]

Have you tried FIST holsters? They still make more conventional holsters for revolvers and might be able to help you. I've been pleased with stuff I've gotten from them in the past.

***CRAP! Why did I not see the above post? Sorry for the duplicate.***