SASABERANGER
SWCA Member, Absent Comrade
I am going to run this up the flagpole and see if anyone salutes.
I obtained a BLUE demilled Pre Model 10 (C prefix) Custom target (IPSC/PPC/Bullseye?) gun. Really not sure of Style Designation
I am only interested in keeping the frame (SB) to assist in fitting grips.
Item #1 is the full set of internal parts (NO CYLINDER). DAO Hammer (complete) and polished trigger (complete) and ALL of the internal parts from the side plate area, also the ejector star, ejector rod and springs, crane, main spring, thumb latch and retaining nut. all parts are blue except the hammer and trigger which have been highly polished.
There is no sideplate or associated screws. And no original barrel.
Everything shipped for $31.00 via priority mail flat-rate with D/C.
Item #2 is a heavy 6" slabside .38 Spl Barrel from "Moore Accuracy". The barrel was professionaly removed from the frame and is for a pinned K frame Receiver. The barrel has a full length detachable weight/underlug on the bottom. Top Rib/Sight Assembly has been removed and IS NOT AVAILABLE. Bottom left of barrel and top left of lower weight have been machined to make an ejector rod housing. Bore is bright and shiny, forcing cone threads are sharp and not buggered, two tapped screw holes on top of barrel to attach sight rib. It appears that one of them has a broken screw still in it. Right side is engraved "Cal. .38 Special". Left side is engraved" Custom Built By Moore Accuracy"
This Item is $81.00 shipped to your door via Priority Flat rate with D/C.
If both items go to the same address total will be $6.00 less than advertised as both will fit in one box.
NO PMs. Email [email protected]
Thanks,
Thom Braxton
SWCA #1474
I obtained a BLUE demilled Pre Model 10 (C prefix) Custom target (IPSC/PPC/Bullseye?) gun. Really not sure of Style Designation
I am only interested in keeping the frame (SB) to assist in fitting grips.
Item #1 is the full set of internal parts (NO CYLINDER). DAO Hammer (complete) and polished trigger (complete) and ALL of the internal parts from the side plate area, also the ejector star, ejector rod and springs, crane, main spring, thumb latch and retaining nut. all parts are blue except the hammer and trigger which have been highly polished.
There is no sideplate or associated screws. And no original barrel.
Everything shipped for $31.00 via priority mail flat-rate with D/C.
Item #2 is a heavy 6" slabside .38 Spl Barrel from "Moore Accuracy". The barrel was professionaly removed from the frame and is for a pinned K frame Receiver. The barrel has a full length detachable weight/underlug on the bottom. Top Rib/Sight Assembly has been removed and IS NOT AVAILABLE. Bottom left of barrel and top left of lower weight have been machined to make an ejector rod housing. Bore is bright and shiny, forcing cone threads are sharp and not buggered, two tapped screw holes on top of barrel to attach sight rib. It appears that one of them has a broken screw still in it. Right side is engraved "Cal. .38 Special". Left side is engraved" Custom Built By Moore Accuracy"
This Item is $81.00 shipped to your door via Priority Flat rate with D/C.
If both items go to the same address total will be $6.00 less than advertised as both will fit in one box.
NO PMs. Email [email protected]
Thanks,
Thom Braxton
SWCA #1474
