datsun40146
Member
SOLD TO digiroc
Up for sale is my 3913NL. I've had it about 8 years now. It was my first carry piece and my first USPSA, IDPA and Steel gun. As such I got really good with it. However, I moved to a different system and don't shoot this gun much any longer. So its up for grabs.
There are several caveats however. I have a documented 25K rounds through this gun and years of carry time. It several both roles very well, I can honestly say that in every match I used it in, it never jammed. Not once.
Anyway, it has some wear from all the shooting and carry.
You will see bright spots on the aluminum frame and slide. and it needs a better cleaning. I tried to get a picture of all the wear areas. Just want to make clear, this was not a safe queen. She was used.
However I had the gun worked over by Teddy Jacobson "Actions by T"
He completed the following
1.Complete Action Job, everything inside the weapon is polished and jeweled like you would not believe. Its pictured below.
2. Install Hammer and trigger Wolff springs, and replace the recoil spring.
3.Clean and lube the weapon
4.Polish the breech face, Its slick let me tell you.
5.Re-cut crown to 45 degrees and polish the bore
6.Refinish the rear barrel section.
7.Polish the feed ramp. I can see myself in it, no joke.
8.Paint the sights and place his logo
The trigger was reduced and smoothed out from 12.5 DA and a 6 pound SA to a 9 pound DA and a 5 pound SA. Grand total with shipped was just under $300
Teddy is a great guy to work with, I called what felt like daily and he was never too busy to give me an update on my weapon and to answer any question I had. His communications gets a big star in my book.
The gun comes with 5 magazines, a K shoulder holster which **** about a 38-39 jacket size.
I'm asking $675 for the gun. If you'd like to make an offer, call or text me at 502-642-8784 or send me a PM.
Up for sale is my 3913NL. I've had it about 8 years now. It was my first carry piece and my first USPSA, IDPA and Steel gun. As such I got really good with it. However, I moved to a different system and don't shoot this gun much any longer. So its up for grabs.
There are several caveats however. I have a documented 25K rounds through this gun and years of carry time. It several both roles very well, I can honestly say that in every match I used it in, it never jammed. Not once.
Anyway, it has some wear from all the shooting and carry.
You will see bright spots on the aluminum frame and slide. and it needs a better cleaning. I tried to get a picture of all the wear areas. Just want to make clear, this was not a safe queen. She was used.
However I had the gun worked over by Teddy Jacobson "Actions by T"
He completed the following
1.Complete Action Job, everything inside the weapon is polished and jeweled like you would not believe. Its pictured below.
2. Install Hammer and trigger Wolff springs, and replace the recoil spring.
3.Clean and lube the weapon
4.Polish the breech face, Its slick let me tell you.
5.Re-cut crown to 45 degrees and polish the bore
6.Refinish the rear barrel section.
7.Polish the feed ramp. I can see myself in it, no joke.
8.Paint the sights and place his logo
The trigger was reduced and smoothed out from 12.5 DA and a 6 pound SA to a 9 pound DA and a 5 pound SA. Grand total with shipped was just under $300
Teddy is a great guy to work with, I called what felt like daily and he was never too busy to give me an update on my weapon and to answer any question I had. His communications gets a big star in my book.
The gun comes with 5 magazines, a K shoulder holster which **** about a 38-39 jacket size.
I'm asking $675 for the gun. If you'd like to make an offer, call or text me at 502-642-8784 or send me a PM.
Last edited by a moderator:
