I've decided to move along my S&W 242Ti. Yes, I just got it a couple months ago. It's a fine gun, but it's not the right one for me. I've shot it a fair bit, and have found that some combination of the grips and my hand isn't "right". I feel like I'm struggling to get a sight picture, and that's not appropriate for a CCW. So, down the road it goes.
Seven-shot AirLite/Titanium L-frame hammerless, .38+P rated, with a Lobo Gun Leather IWB holster (1.25" and 1.5" loops), 7-shot dump pouch, and Master trigger lock. No box/papers/tools, will ship in a zippered rug.
It's been carried (by me and others before) and has a bit of character. There is a small ding on the bottom edge of the barrel shroud, picture below. The recoil shield has a wear line from the lock stud, as usual for alloy-frame guns. The finish is a little shiny on a few high points.
Extractor is straight and true. Cylinder is intact. No flame cutting that I can find. Forcing cone is intact, as is the frame. Screws are un-buggered. I had the sideplate off once for a more thorough cleaning immediately after purchase, internals all look good.
$750 shipped/insured FFL-FFL, three-day non-firing inspection, otherwise as-is. Payment by USPS Money Order.
Trades +/- cash will be considered; of particular interest are
- flat-top AR carbine uppers (16", 1/7-9, chromed, free-float, ban-compliant)
- 1911s - Commander bobtail or CCO (Kimber, DW, Colt, Springfield)
- CZ-75 9x19mm
- O/U 20ga or Remington auto shotguns
- XD9
- S&W/Ruger/Colt revolvers
- S&W 3rd gen autos in 10mm or .45
- anything from Ithaca Gun - *especially* a correct Ithaca 1911
Photos:
IMG_3053.JPG | Flickr - Photo Sharing!
IMG_3052.JPG | Flickr - Photo Sharing!
IMG_3056.JPG | Flickr - Photo Sharing!
IMG_3058.JPG | Flickr - Photo Sharing!
IMG_3059.JPG | Flickr - Photo Sharing!
gunleather 008.jpg | Flickr - Photo Sharing!
First firm "I'll take it" followed up with PM takes it. Ask away with any questions.
(This has been posted on other forums.)
Trade pending with adwjc.
Seven-shot AirLite/Titanium L-frame hammerless, .38+P rated, with a Lobo Gun Leather IWB holster (1.25" and 1.5" loops), 7-shot dump pouch, and Master trigger lock. No box/papers/tools, will ship in a zippered rug.
It's been carried (by me and others before) and has a bit of character. There is a small ding on the bottom edge of the barrel shroud, picture below. The recoil shield has a wear line from the lock stud, as usual for alloy-frame guns. The finish is a little shiny on a few high points.
Extractor is straight and true. Cylinder is intact. No flame cutting that I can find. Forcing cone is intact, as is the frame. Screws are un-buggered. I had the sideplate off once for a more thorough cleaning immediately after purchase, internals all look good.
$750 shipped/insured FFL-FFL, three-day non-firing inspection, otherwise as-is. Payment by USPS Money Order.
Trades +/- cash will be considered; of particular interest are
- flat-top AR carbine uppers (16", 1/7-9, chromed, free-float, ban-compliant)
- 1911s - Commander bobtail or CCO (Kimber, DW, Colt, Springfield)
- CZ-75 9x19mm
- O/U 20ga or Remington auto shotguns
- XD9
- S&W/Ruger/Colt revolvers
- S&W 3rd gen autos in 10mm or .45
- anything from Ithaca Gun - *especially* a correct Ithaca 1911
Photos:
IMG_3053.JPG | Flickr - Photo Sharing!
IMG_3052.JPG | Flickr - Photo Sharing!
IMG_3056.JPG | Flickr - Photo Sharing!
IMG_3058.JPG | Flickr - Photo Sharing!
IMG_3059.JPG | Flickr - Photo Sharing!
gunleather 008.jpg | Flickr - Photo Sharing!
First firm "I'll take it" followed up with PM takes it. Ask away with any questions.
(This has been posted on other forums.)
Trade pending with adwjc.
Last edited:
