--Unamerican Handguns-- Manurhin MR96

Swissman

Swissman

Member
Joined
Feb 19, 2005
Messages
769
Reaction score
482
Location
Switzerland
The "Unamerican Handguns"-serie goes on. The "departement of guns and explosives" heard a long time
nothing from me. Until this April, as I found a very rare, french species.

It is finally a fact. The Manurhin-Revolver-Collection is now complete.
MR73, MR88, MR22 (SA only), MR93, and now finally: MR96!!!

I am still excited about the great find and its quality and condition

Swissman
 
Last edited:
Register to hide this ad
Yea Swissman, would really like to see some pics of you unique collection of Manurhin's. What calibers do you have? Are the Manurhin's easier to find where you're at? I have a 4" target that was an ex police gun, nice shooter. Larry
 
Some quick pictures...

This collection was presented two or three years ago.


Since then bites me the bug, to find a MR-96 in good condition for a reasonable price. It is the last version of the Mulhouse-made revolvers. The gun is made with CNC-machines only. Even the lasercontrolled tolerances-checks was made by machines. They were made it in 3", 4", and 6". All in .357 Magnum. And when I stumbled over one of this rare guns somehow and somewhere, they were always e x p e n s i v e and/or in bad condition (in relation to the asked price). But good things comes to good people. I found my little holy grail accidentally in a knive-shop. I could snap this gem for less than $650, all paperworks included.

I am sorry to say, that we have here some members, who don't believe in accidentally circumstances.

Here some impressions of the gun. Sorry for all the lints on the gun. As I said; Quick pictures.....





Locking-system


Transport-system


Clean barrel and a nice muzzle. The frontsight is changed very fast.


Markings-details...






A comparing of the MR96 with an attempt from a gun-making-company-wannabe :D





Some shootingresults will follow, if the big ape hasn't throwed me out in between.

Swissman
 
Last edited:
Swissman said:
...A comparing of the MR96 with an attempt from a gun-making-company-wannabe :D

...Some shootingresults will follow, if the big ape hasn't throwed me out in between.
Click to expand...

Well, I was going to feel sorry for you until this unnecessary and inflammatory remark was made - now, no "like" for you! :p

As to the second remark, though I cannot speak for him and his staff, I think you "seriously misunderestimate" their forbearance with these kinds of things. The gun culture here, just as there, is always full of vigorous and uninformed opinions. They are used to it. :D

Good luck with the '96 and we will stand-by for the shooting results. :rolleyes:
 
Pretty sharp looking gun, kind of reminds me of some of the heavier Dan Wesson revolvers.....
 
Your gun is in nice shape and you found cheap. Are the 96's made as strong as the 73's?? It has a different look to it but is a very nice looking gun. Saw one for auction recently and it went for a lot more then what you paid. Nice collection of Manurhin's, what is the one with the Nill target grips on the bottom. Larry
 
The Ruger-like MR-88 has some sort of crane lock, seen in that dot in the crane. Is this a pin that engages the hole when the crane is closed? Is it just a pin in the frame, or is it it more complicated?

I've wondered about this for years and never saw an explanation.

Thanks for the nice photos, as always, and congratulations on finding the MR-96 at a sane price.

Is Manurhin still in business?
 
Swissman, is the cylinder release that serrated lever on the RH side forward of the trigger guard? Designed to release with the trigger finger?

Super neat piece, the only thing I don't care for is the hooked trigger guard. ;)
 
It's obvious that Swissman's remarks about the 'comparision' were strictly tongue in cheek. Made me grin, too.
 
Hello Texas Star,

The Ruger-like MR-88 has some sort of crane lock, seen in that dot in the crane. Is this a pin that engages the hole when the crane is closed? Is it just a pin in the frame, or is it it more complicated?

I've wondered about this for years and never saw an explanation.


It is an additional locking against horizontal shift of the cylinder/crane-unit.
For more details scroll a bit down here..
http://smith-wessonforum.com/firear...ve-sinned-more-mr-88-colt-nf-sa-pictures.html


Is Manurhin still in business?


Manurhin has stopped making revolvers. They sold the machines to the gunmaker Chappuis Armes

Catalogue:
Manurhin Cata 8p Calameo

Homepage:
Chapuis Armes

Swissman
 
Last edited:
Jebus35745 said:
Your gun is in nice shape and you found cheap. Are the 96's made as strong as the 73's?? It has a different look to it but is a very nice looking gun. Saw one for auction recently and it went for a lot more then what you paid. Nice collection of Manurhin's, what is the one with the Nill target grips on the bottom. Larry
Click to expand...

Hello Larry

Nill-Grip-Gun is a MR22. It is the MR73 with a non-glare surface, single-action only and in .22 l.r. I really like this gun a lot.
I had the luck, that the LGS had mercy on me and sold me this gun with 1400 rounds of Eley ammo from the 1980ies for a
really fair price. I introduced this gun earlier here.
http://smith-wessonforum.com/lounge/237065-unamerican-handguns-mr-22-match-matra-manurhin.html

Swissman
 
VictorLouis said:
Swissman, is the cylinder release that serrated lever on the RH side forward of the trigger guard? Designed to release with the trigger finger?

Super neat piece, the only thing I don't care for is the hooked trigger guard. ;)
Click to expand...

Hello Victor Louis

I can use the middle-finger to press the lever on the RH-side and push the cylinder out with the triggerfinger.
But most of the time I use the left hand, press the lever and push the cylinder out.




Swissman
 
Last edited:
The Frst Shooting-Results of the Manurhin MR96

Hello to all the members here!

The MR96 was this thursday the first time at the shootingrange with me. I tried
first with some .38 Wadcutters. The flatter angle of the grippiece, the rubber
Trausch-Grips and the heavy barrel makes it very easy to keep the gun at the
target, after the firing-pin hits the primer. All five rounds were a bit on the RH-
side. I adjusted to the left and fired the first three rounds of .357. Mag. The
gun pushes the recoil much more direct into my hand and forearm, than a S&W
or a Colt. But the muzzleflip is remarkable less, than with the mentioned guns.
All pictures at 26.5 yards, (25 meters) free standing, both hands, SA, if not
other described:





I get used to the gun, the trigger-characteristics and the heavy foreweight
(2.83 pounds, unloaded) pretty fast. My buddy at the range wanted to
tryout the gun too. Specially, if it is such a rare thing like a MR96. The
break was a good thing for me. The first excitement of the new gun was
gone and I was very focused. This is a nice, very concentrate fired serie in SA.
OK, #3 was to low. I repeated #3 immediatley from the same chamber.



...and another nice group...



We fooled around with DA at 25 meters, slowfire. I could punch this result
into the target with the leftovers of the .38 Wadcutter



and as fast as possible.... (Hey, we were hungry and wanted to go eat a fine
Cordon-bleu)



The gun is great. I got three missfires in DA. I won't blame the gun for it right
now. But I will clean the gun and polish, if necessary, the moving/rubbing pars.

Swissman, over and out
 
Last edited:
Maybe after "200 hours" of cleaning and polishing the gun will be reliable - and maybe not. 😆

That is nice shooting, Swissman - have to give you that.
 
That is exceptional shooting. Being a shaky old man the only way I can approach this level of accuracy with a handgun is by resting my hands on a sandbag.

What I find interesting is that the MR96 appears to feature a 2 piece Tensioned Barrel. Is that the case? It also appears that the MR96 copied the Dan Wesson revolvers to some extent by employing a Crane Lock. Is that lock purely a Spring Detent similar to the current S&W models 66 and 69 or is an actual latch used?

BTW, if you ever see one for sale I can recommend the Dan Wesson revolver as a very interesting bit of kit. The cylinder is locked by a latch on the crane and a detent at the rear center of the cylinder so End Shake just doesn't happen on a Dan Wesson. However it does take a bit of time to get used to having to push the cylinder open after releasing the latch. There is also the Tensioned Barrel system which allows the user to change the barrel at will and adjust the Barrel/Cylinder gap to any gap desired. BTW, I run my B/C gap at 0.0035 inch and have shot up to 100 rounds without any hint of drag. About the only negative to the Dan Wesson is that the design just doesn't permit a Double Action trigger pull below 12 lbs., good news is the Single Action trigger breaks at 3 lbs. and is very clean.
 
You must log in or register to reply here.

Similar threads

RM Vivas
NYPD Model 64-1: 4-inch SB, 4-inch RB, 3-inch RB and 2-inch RB
2
Replies
39
Views
2K
RM Vivas
RM Vivas
Jeroenw114
45ACP pistols. The unknown, the rare and the prototypes.
2 3
Replies
47
Views
8K
BLACKHAWKNJ
B
ddeanjohnson
  • Locked
WITHDRAWN. WTS: Collector downsizing-- 26 collector handguns
Replies
10
Views
6K
ddeanjohnson
ddeanjohnson
ddeanjohnson
WTS: list of 22 guns that remain -- MORE PRICE REDUCTIONS -- collection liquidation
2
Replies
28
Views
15K
ddeanjohnson
ddeanjohnson
ddeanjohnson
  • Locked
WITHDRAWN -- Collection reduction: 40 guns (15 S&W + Colts, etc.)
2
Replies
26
Views
10K
ddeanjohnson
ddeanjohnson

Latest posts

Back
Top