I will chime back in here, thanks for the link to the OSHA site.
I dont think I was to far off, ok I will give you they did leave a suggestion of lowering calibers. My guess is that they have a standard for gun noise by caliber, a 9mm is X db and a 44mag is Y db etc. They offered a suggestion, one of several.
I didnt read the entire thing, I am short on time.
Why picking up the round is a problem is the range (according to the report) is contaminated and is almost every surface that gets touched. Things like the broom, key boards, mouse, the list went on. You pick up a contaminated object then go to the office computer or sweep up. It just transfer the contamination. Since the range didnt bother to test employees for lead levels we dont know how bad it really is.
I am sorry but I dont have pity on the range, the icing on the cake is cleaning the range by blowing with compressed air. It does not get much stupid than that.
I do think that one item that would get off the list is the exposed to flying spent shell case, that are sharp and dangerous (paraphrasing here). That is a stretch.
The place seems to have little to no PPE...
What else, no/ improper eye protection, I am surprised that everyone does not know that standard eye wear isnt safety glass. Then even if it is it needs proper side shields. You can buy prescription safety glasses and add side shields to meet the regulation. The side shields come on and off so you can wear your glasses normally. It does add a few dollars to the cost of glasses
Inadequacy of ear protection my guess is the place has smooth walls and ceiling and its loud. I do find it hard to believe that instructors are exposed for as many hours as the report claims
I hate to say it but these are the most basic laws, glasses, hearing, HazCom, the lead exposure is more difficult to understand and follow.
Another question is how many people work in the range total, 3, 5, 10 or 50?
At some point addressing all these things becomes a full time job for someone. Just maintaining MSDS, hearing tests and records, lost time records, and the lead stuff, its work and needs to be done right.
How these things normally go is someone shows up and says "Hi were with OSHA and would like to see your loss time records" In this case its probably lead testing records. If you say"sure come into my office and I will get them" They smile and think your trying to do the right thing, if you make a dumb face and say what are you talking about. The tone changes...
Id bet they could have written MORE if they wanted to, pen must have run out of ink
Id say to the gun range, welcome to 1990...
My guess is still something triggered the inspection. OSHA does not really have the man power to do these places a random. The construction industry keeps them busy most of the time.
The range needs a lawyer that specializes in this and a company that sets up and helps establish these programs. The fines should go down, way down. Unless they acted like nit wits.
If this place was a factory that made lead widgets, all the same laws could have been broken. The widget factory would have not been a story at all.
I dont really deal with this end of OSHA stuff, PPE yes, HazCom sure, lead and exposure no. I deal with this you can look it up if you care to
29 cfr1910.212
29 cfr1910.217
Ive got an early am busy week, its shutdown time...
