Coach Gun Project

B

Budasac

Member
Joined
Jul 9, 2013
Messages
230
Reaction score
358
I picked up a used coach gun recently that appears to have been pretty neglected. Besides being dirty as hell, there are some scratches on the barrel, a little surface rust, a bent trigger guard, and a stuck firing pin. The wood looks decent in that there are no cracks but, the previous owner apparently tried to refinished it and did a less than professional job (at least it he didn't do any permanent damage). It looks better in the pics then it does in person. The bright lights actually make the stock look pretty nice. I thought it would make for a good project.

The first order of business is to give her a good scrubbing and see what I'm actually working with.






 
Last edited:
Register to hide this ad
I'll be interested to see what you do with this. The hole in the trigger guard...is that factory? I've never seen that before and wonder what purpose it serves.

EDIT: Never mind about the hole...looking closer at it, I guess it's for tightening/removing that screw in the trigger guard.
 
Last edited:
It gives access to the front trigger guard screw. Otherwise you have to use an offset and come in from the side.
 
WATCHDOG said:
I'll be interested to see what you do with this. The hole in the trigger guard...is that factory? I've never seen that before and wonder what purpose it serves.
Click to expand...
The hole is a there to give you access to the screw that holds the guard in place. It doesn't line up on this one at all though since the previous owner seems to have dropped the gun.[emoji53]

(Guess I'm too slow, Alpo beat me to it.)
 
Last edited:
I actually got started on this last night, since I have no idea what issues this gun may have, besides the obvious, I decided to just pull the whole thing apart.
 
I was reading up on the Stoeger and apparently a sticky firing pin is a common issue. The steel is too soft and starts to bulge, which causes it to get stuck. As a result, after firing, the pin sticks in the primer which prohibits the gun from opening. I'm guessing this may be one of the reasons the previous owner dumped the gun.

In any case, I had trouble removing the firing pin, so I made myself a little homemade spanner wrench. I placed a piece of paper over the firing pin and rubbed with a pencil to trace the layout of the holes, then placed the paper on a small piece of Maple stock from the shop and drilled a few holes part way into it. I then hammered three finish nails into it, cut them to length, and filed them to make the ends even. Worked like a charm.


Most of what I read said it tends to be the side of the pin struck by the hammers that bulges but, in this case it was the side that strikes the primer. I plan to order some SS firing pins but, in the mean time, my fix was to place the pin in a drill and run it along a piece of 1000 grit sand paper on the edge of my gun bench until it fit smoothly. I oiled it up and re-assembled. All is well now.
 
Last edited:
I sanded and sprayed the wood. I put on 6 thin coats, it should look a lot better then whatever the previous guy did to it. I'll let it dry over night and then buff it out with some steel wool and wax.


 
Last edited:
Very nice start

Are you leaving the barrels that long?

I just trimmed these down on my coach gun last month. With the shorter tubes it swings great for house use.

sxs3s.jpg
 
I have a Stoeger double, sits beside my honeys nightstand. I trimmed the LOP to 12 inches, brought the barrels to a happy 18.5". It ain't purty but works just fine. It will print a side by side group with 1 oz slugs about an inch low at 50 yards.

Low velocity loads are just plain soft shooting in it. This might motivate me to make Iit look nicer. Great job on that little one Colt!
 
I JUST LOVE THESE COACH GUNS. I HAVE BEEN DROOLING OVER THEM SINCE THEY FIRST APPEARED IN THE ANNUAL "SHOOTERS BIBLE" MANY YEARS AGO. NOT REALLY HAVING A NEED FOR ONE (AS IF WE PURCHASE FIREARMS BECAUSE WE "NEED" THEM) I RESISTED ORDERING A NEW ONE. AS LUCK WOULD HAVE IT, I HAVE NEVER RUN ACROSS AN INEXPENSIVE BEATER TO FOOL WITH. Colt saw's IS A BEAUTY. I AM A BIG FAN OF BUDASAC'S, AFTER HIS MILSURP RIFLE PROJECT--ADMIRING BOTH THIS YOUNG MAN'S TALENT AND INITIATIVE. (HE IS NOT A BUBBA) I WILL BE FOLLOWING THIS THREAD CLOSELY, AS I EXPECT THIS COACH GUN OF HIS WILL BE SOMETHING TO BE PROUD OF …...
 
Last edited:
Jessie said:
I thought that was more of a federal issue.
Is there such a thing as SBS class?
Click to expand...
I don't really want this to turn into a discussion on SBS's but.......
Short barreled Shotguns (less then 18") are legal as long as they are approved and registered by the ATF. After applying and receiving the permit you're supposed to engrave your name and address on the firearm.

Here's a link to a description of how to apply for anyone who's interested - http://www.shotgunworld.com/bbs/viewtopic.php?t=80131
 
one eye joe said:
I JUST LOVE THESE COACH GUNS. I HAVE BEEN DROOLING OVER THEM SINCE THEY FIRST APPEARED IN THE ANNUAL "SHOOTERS BIBLE" MANY YEARS AGO. NOT REALLY HAVING A NEED FOR ONE (AS IF WE PURCHASE FIREARMS BECAUSE WE "NEED" THEM) I RESISTED ORDERING A NEW ONE. AS LUCK WOULD HAVE IT, I HAVE NEVER RUN ACROSS AN INEXPENSIVE BEATER TO FOOL WITH. Colt saw's IS A BEAUTY. I AM A BIG FAN OF BUDASAC'S, AFTER HIS MILSURP RIFLE PROJECT--ADMIRING BOTH THIS YOUNG MAN'S TALENT AND INITIATIVE. (HE IS NOT A BUBBA) I WILL BE FOLLOWING THIS THREAD CLOSELY, AS I EXPECT THIS COACH GUN OF HIS WILL BE SOMETHING TO BE PROUD OF …...
Click to expand...
Joe,
Thank you for the compliment and support, it's much appreciated. The rifle is shooting great. I just picked up a 440 round can of ammo for it and plan on shooting the **** out of it next time out.
(BTW, my father was also a SSG and in Vietnam in '68-'69. He was with the 1st Cav.)
 
Last edited:
So, I cold blued a few spots on the barrel that were bare and had formed some rust. I did it twice. Some spots came out better then others. Even the most noticeable spot you would have to look for to find. It stands out in the picture but only because I'm zoomed in on it. When it's wiped with oil it looks pretty good.


 
Last edited:
The stock turned out pretty nice. I got most of the marks out of it. There were a couple of deep scratches that I tried to steam out but they can still be seen if you look close. I didn't want to sand too much off it.


 
Last edited:
I torched and re-bent the trigger guard, then I cold blued it. It came out OK. I'm not crazy about it. It was difficult to get the proper curve in it. It's better then it was though. I may contact Stoeger and see if I can purchase a new one.



 
You must log in or register to reply here.

Similar threads

2
Close call at a gun show this AM
2
Replies
37
Views
3K
Phenix
P
chief38
I have finally figured it out! Thank you Project Farm! LOL!!
Replies
2
Views
277
hemiram
H
JohnRippert
Finished the latest guitar project
Replies
2
Views
112
hkcavalier
hkcavalier
chief38
The most rusted stainless steel gun I have ever seen in person - a PSA!
2
Replies
35
Views
2K
desi2358
D
D
Received my Regulation Police today
2
Replies
20
Views
697
daveboy
D

Latest posts

Back
Top