chaparrito
Member
My tinnitus got louder just reading this thread.
I'm not sure your question was answered directly, but even with perfect re-alignment of the gun there is some dispersion, just like there is with a rifle, so you won't put the next round in the same hole as the last one.
Accuracy is a relative thing. On the one hand the accuracy of even an unguided artillery round, when using modern firing tables, is often more accurate than the surveying on the map, so you'll need to fire some registration rounds to work out the errors.
On the other hand with unguided artillery rounds and ranges over about 10,000 meters you'll be doing really well to land just half the rounds within 100 meters of the target.
That's not a bad thing however as like a machine gun, an artillery piece is an area weapon and having some dispersion is part of the plan. It's much more effective spreading six rounds over a 100 or 200 meter impact area than dropping five rounds in the same crater made by the first round, particularly then the kill radius of the round for troops in the open might be 30u to 50 meters (50m for a 155, an area 100 meters in diameter). The idea is to saturate the entire area with shrapnel, and as such you are engaging an area target not a point target.
The idea behind firing as a battery, is that all the rounds will arrive at the same time, providing less warning as to precisely where they will land, making all the rounds equally effective.
Some modern quick firing self propelled artillery can deliver multiple rounds on different trajectories to the same target, so that a single gun can deliver rounds that will all impact at the same time. That's a handy capability to have, particularly when the gun needs to shoot and scoot to avoid counter fire.
---
As noted above some rounds are fuzed to detonate above ground as it is much more effective for antipersonnel rounds. However rounds can also be fuzed to explode on contact, or with a slight delay to allow them to penetrate before exploding. That's much more effective on buildings, bunkers, roads, runways, etc.
The majority of Artillery rounds fired are NOT HE rounds. What's mostly fired is Dual Purpose Improved Conventional Munitions (DPICM)
when you look at a video of cannons being shot during WW2 or Vietnam everybody is really busy loading and shooting and it doesn't appear that anybody is making downrange adjustments. is there a built in deflection for the shell after it is fired or are they just making the hole deeper where the shell lands?
Interesting...been out a while and did not know that!
DPICM sounds great for troops in the open. Is it any good
against light/moderate overhead cover?
I dont know anything but heard they do an intentional over and under then are usually right on target.
I really wished I could have heard those rounds passing overhead. I was told it was thrilling.
what I remember from RVN is 105mm M102 howitzers that were choppered around the AO in direct support of troops and fired in all directions(6400 mils).
When I was an ROTC instructor the cadets told us they were taught to bracket the target before adjusting directly onto the target and that they got points taken off their grade if they didn't.
That was training, in the real World if all the stars and planets aligned and your first round was a direct hit you'd call for FFE and roll.
DPICM rounds are packed with a combination of armor defeating and anti personnel munitions. The anti armor munition will defeat the armor on the top of a tank
the crew would load the gun with
excess charges instead of a projectile, for the night. They called
this their Crispy Critter load.