3913 Mag Question

[Green Frog]

Do mags for the Model 3913 fit and function in the Model 639? I guessing yes IF they are the same length, but I’ve been wrong before! TIA!

 

[stansdds]

No, the 3913/3914 magazines are too short for the full length magazine well of the 39/39-2/x39 pistols. The full size magazines will fit in the 3913/3914, just don't over seat them.

 

[ACEd]

Do mags for the Model 3913 fit and function in the Model 639? I guessing yes IF they are the same length, but I’ve been wrong before! TIA!

NO the 3904/3906 replaced the 439/639 as a "full size" single stack 9mm. The 3913 was a compacted version with a shorter 8rd magazine which ultimately replaced the short lived 3904/3906.

The 3904/3906 mags may work in a 439/639 but they had plastic baseplates and the 439/639 had metal baseplates - as I recall there is a slight gap at the bottom of the grip when using the mags with the plastic baseplates in the 439/639 and earlier 39-2 pistols.

 

[Green Frog]

I was afraid of that, but thanks for saving me from a few mags I couldn’t use.

 

[SSBiggun]

when I got my 3913 the guy had 5 mags. 3 for it and 2 639's that worked. when I got my 3906 the 639 mags were a no go so I sold them and got more 3906 mags which also work in the 3913.

 

[ACEd]

when I got my 3913 the guy had 5 mags. 3 for it and 2 639's that worked. when I got my 3906 the 639 mags were a no go so I sold them and got more 3906 mags which also work in the 3913.

The longer 3904/3906 (or the 439/639) mags can be used in a 3913/3914/3953/3954 but they will stick out - but the shorter 3913 mags can NOT be used in a 3904/3906/439/639/39 which was the OP's question.

 

[S-W4EVER]

I wish S&W would order another supply of 3913 mags. A couple years ago I had some on order at MidwayUSA and they abruptly canceled the order (which they obviously couldn’t fill, no hard feelings).

 

[Heinz]

The best way to save yourself from magazines you don't use is to buy one of the autos they fit.

 

[Timber Wolf]

The best way to save yourself from magazines you don't use is to buy one of the autos they fit.

Yep, we have all done it. ; )

 

[CW3RDL]

The best way to save yourself from magazines you don't use is to buy one of the autos they fit.

Yeah! About 25% of my handguns fit that category. Hahahaha

 

[GaryS]

I bought my first 457 because a friend found a live .45ACP round in the parking lot of a police station and gave it to me.

Yep, we have all done it. ; )

 

[Heinz]

Just remember when you see your next 3913 NL, that you wife should have that Ladysmith, and the NL would bring in another magazine that fits in either

 

[GaryS]

I have a 3914NL and a 3913LS. Nice guns, both.

Just remember when you see your next 3913 NL, that you wife should have that Ladysmith, and the NL would bring in another magazine that fits in either

 

[freewayflyer]

Do mags for the Model 3913 fit and function in the Model 639? I guessing yes IF they are the same length, but I’ve been wrong before! TIA!

Sarco had decent after market mags for model 39 . I got 10 of them . They have worked fine in my 639 and 39-2 . They work fine in 3913 also but they stick out of the bottom about half an inch . If you have 3913 factory mags hang on to them, they are pricey