Recent content by B0baFett

Yes my compact has the 4" barrel. I have a M&P 40c with the magazine safety and the slides underneath look identical other than the length differences and the extractor.

But what would be the difference in slides? Isn't the magazine disconnect that little tab in the mag well that pops up when a magazine is inserted. I have a gen 1 M&P 40c that you need to push that tab down so the slide will release to be taken apart, unless it does something like that I guess.

I have a 2.0 compact 9mm. Looking to find a performance center core slide in 4.25". I've found a couple of slides that should work but one says its works with a safety and the other is for the frame with no manual safety. Should that matter at all? Aren't the slides the same? There is almost a...

UPDATE 11/11/2017 Finally got the the range over the weekend. After tearing apart the gun and giving it a complete inspection and cleaning from my last range trip, I realized the trigger wasn't resetting after each shot. It seemed like the magazine disconnect was causing the sear to catch/not...

The company who did the milling and cerakote remove and install a new striker channel sleeve each time due to the fact that the process involves heating the slide for the ceramic to adhere to the metal. I think my problem was with the sear spring/magazine disconnect. I tore the gun apart and it...

Just got back from being cerakoted. Took to range. It fires first round then won't fire second.Had to rack slide half way to shoot second round. Ejects rounds perfectly. All 7 lube points were lubed with normal amount. Every other round won't fire. Not sure if its a sear/battery issue or...

Could you send a pic of the 1.0? I have a 40c and want to get a light but not if its gonna be past the barrel. I know the viridian C5L works but im not spending that much on a light/laser when I only need a light. I went on inforce's website and downloaded the specs for this light and was...

Could you post a pic please?

Anyone have this on a 9/40 compact? Not 2.0. I emailed inforce and googled but seems like noone has this set up. Just wondering if the barrel sits flush with the light.

Thanks everyone for the info and helpful hints.

I already have the old one out, just didn't want to break the new one when installing. I have a flat head punch that will fit in the channel to put even pressure on the liner to install, will just use hand pressure to install and not hit it with a hammer.

When will i know that it is seated all the way? I don't want to break it while installing and have to reorder another one.

yes the striker channel liner, sorry I didn't specify that originally. Im having my slide milled for a RMR and cerakoted and it said that the striker channel liner needed to be replaced due to the cerakoting procedure.

Does anyone know an easy way to install a new channel liner without messing it up. Don't really want to spend $25 on a specific tool for this if I can file a bolt down and make the same thing via D.I.Y.

Looking to have my M&P 40c slide milled by battlewerx. I am wanting to have the dovetail milled behind the RMR. Does anyone have pics of this with the extra tall suppressor sights vs regular suppressor sights? On the battlewerx website they say a rear sight of .500" is needed to co witness...