Recent content by strobro32

Is it true they are made by Magpul?

I checked the 5 replacement mags and the 10 new mags I got from Joe Bob Outfitters and there are problems with 3+ more. My 13 yr old Son can't insert or remove the mags without effort. The new mags are too wide and needs to have material removed from the seams to fit the magwell. :mad:

The SS trip for the 15-22 is about 2 months out. Still working on the bolt bounce.

I just got back from the range. One of my new mags, that Smith replaced, split at the back seem after the first loading. It cause the rounds/follower to bind in the center of the mag. Whatever their using to join the mag halves is not working. I love this gun and the reliability of the mags. I...

I have an accessory in the works.

It's completely legal under a DOJ settlement, unless prohibited by each state. https://www.atf.gov/firearms/rare-breed-triggers%E2%80%99-frt-15s-and-wide-open-triggers-wots-return I'm using a metal Hoffman Tactical Super Safety which is far superior and cheaper to the FRT-15 that Rare Greed...

Not a full auto 15-22, but other hosts. We are only limited by our imagination. 200 rds with the SS by strobro32, on Flickr

That's a nice can. I have one. I use it all the time on my 15-22s. Some things to consider: 1. Removing the flash hider for the first time requires clamping to the barrel not the receiver. It is possible to twist the barrel inside the upper and bending the ejector. 2. The 15-22 muzzle threads...

I'm using a Super Safety trigger I got from Grey Market Research. The mag is a S&W 15-22 10 rd mag that I converted to work with Bazooka Bros A&D AM180 drum adapter.

200 rds with the SS I edited out the FTE.

S&W does not make 20 rd 22LR mags for the 15-22. They do have good CS.

I just shot 100 rounds without the floor plate catch. The floor plate did not slide off easily even without the catch. 100% reliability. If you want to retain the floor plate, push a thumb tack through the bottom of floor plate. it will catch on the spring and prevent the floor plate from...

Use the existing one as a pattern, A piece of plastic, wood, metal and short screw or dowl rod and superglue. It's 15 minutes at the kitchen table. It dose not need to be perfect. No one will see it.

They have a full-atuo carrier.

They have a lengthy list. I checked first. The S&W AR!5 is not on their list. Thank you.