Recent content by westsdad

The granulate have adhered better than the rubberized version for me. The granulate are a little tough on bare skin for CCW. I used 120 grit sandpaper on them (checking occasionally) until they had the right feel and my shirt wouldn't stick to them.

Finally received it today after 7 days shipping from Kansas (1 state over). Sent UPS Surepost. UPS was fast, but it sat at the local post office for three days. Its the new model and worked great on both the Shield 9mm and Shield .40 S&W.

Was the upgrade the piece of white delron and caution label on the sight pusher? I've got one coming from Midway that was shipped on the 2nd and should be here tomorrow. Want to make sure that I am getting the upgraded sight tool. Thanks, Scott

Everything in the Apex DCAEK for the M&P 9/40 is the same for the Shield with the exception of the slave pin (included tool used to help install the new trigger spring) since the trigger is different. You can use a pin punch as a substitute for the slave pin. I put a set of Trijicon HD NS...

Thanks texas48! Worked great with rear sights for M&P Shield and FS M&P 45. Had a 'smith swap out the front sights. Received an eMail last night from Jon at Apex stating that they don't have M&P Shield Slave Pins yet. At this time, he recommended using a Pin Punch to line everything up and...

Glad to hear that Danny's sight pusher worked well on your Shield's. Mine is getting here today (bought Saturday on eBay) and I've had my Trijicon HD's since Monday. Installing them on a Shield 9mm and a M&P 45 FS. Bought the additional XD blocks as they also work for the front sights of a...

Received the FS set today, and the set has already been installed. They look and feel awesome! Quick turnaround and shipping. Always like to support forum members, especially those that are veterans!!!

M&P SHIELD™ 9mm Date Purchased: May 5, 2012 Serial Number: DXE100X Date Test Fired: 01/26/2012