.32 Long M&P Arrived Today - Letter Update

A

AKtinman

Silver Supporter
Joined
Feb 8, 2005
Messages
636
Reaction score
1,098
Location
MN, At The Lake
The LGS called today to say that the .32 Long I won at auction had arrived. Tom K started a thread about this auction last week.

It looks better in hand than from the photos on GB. And much better than my hasty photos show.

It is a K Frame M&P, .32 S&W Long, 6" barrel, pinned front half moon sight, barrel ejector rod. Serial number 677992 is in the pre-war K32 Target series according to the SWCA Database.

Serial numbers on butt, barrel flat, yoke, extractor star, and cylinder match.

The non-matching grips bear the number 672521 on the right grip and the left grip has the word "Slugger" written in ink on it.

The front of the ejector rod barrel is white. Side plate screws show some evidence of an ill-fitting screwdriver. No rework dates on the sides of the grip frames.

Overall good shape, sharp rifling, some freckling on the sides of the frame, blue wear indicates it spent some time in a holster. Tight lockup and smooth action.

I need to get some photos printed to enclose with the letter request.
 

Attachments

  • DSCN6601.jpg
    DSCN6601.jpg
    123.5 KB · Views: 444
  • DSCN6602.jpg
    DSCN6602.jpg
    102.2 KB · Views: 391
  • DSCN6603.jpg
    DSCN6603.jpg
    72.4 KB · Views: 348
  • DSCN6604.jpg
    DSCN6604.jpg
    88.2 KB · Views: 346
  • DSCN6605.jpg
    DSCN6605.jpg
    101.4 KB · Views: 310
Last edited:
Register to hide this ad
congrats, very nice looking revolver. i would be proud to add it to my little collection. krs
 
I have to say that is a very nice revolver. Very classy, I am more than a little envious.
 
Good for you for recognizing and getting it! Please post the letter results if you are able?
 
That is a great gun. I doubt we will ever see another one from that late 30s era.
BE SURE to describe and send pics of both sights to Roy.
BE SURE to ask what kind of grips it shipped with. They might have been magnas.
After you get the letter, BE SURE to check with the SWHF for correspondence about the gun.
 
Last edited:
Lee, thanks for the advice on what to emphasize in the letter request.

I have the letter request, attached amplifying information, and the photos ready to mail tomorrow.

And I definitely will check with the SWHF after I receive the letter.

The letter contents will be posted here. This forum has been invaluable in broadening my S&W education.
 
I have never seen a pre-war .32 Long M&P, only the Target model. But there were some of them made in the postwar period and they are very seldom encountered as most were exported. Could be that yours was a special order.
 
Last edited:
Two concerns about this one? How can it come from a lot of K32 Targets without being a target? Frame is that of a standard Military & Police. Second, there should be no reason to have a pinned front sight?? Standard M&P barrels came with a forged front sight.

If there is no sign of sleeving of the cylinder, the frame and barrel likely go together and it would still make it a 32 Long M&P, just not a Target. Is there any such thing?
 
glowe said:
Two concerns about this one? How can it come from a lot of K32 Targets without being a target? Frame is that of a standard Military & Police. Second, there should be no reason to have a pinned front sight?? Standard M&P barrels came with a forged front sight.

If there is no sign of sleeving of the cylinder, the frame and barrel likely go together and it would still make it a 32 Long M&P, just not a Target. Is there any such thing?
Click to expand...

Good questions, and I am hoping all will be answered in the letter.

The gun was advertised as a Regulation Police, which it obviously is not.

The S/N does fall within the range of the pre-war .32 Long Target models, and, as you point out, it is in fact a M&P frame.

As to the pinned front sight, from photos I have seen of the pre-war .32 Long Target models, it appears that the pinned front sight is a standard feature on that model. Assuming this was a special order, I think S&W would have used a barrel and cylinder from the .32 Long Target model on the M&P frame.

The post-war .32 Long M&P's appear to have front sights forged as a part of the barrel, rather than pinned, but these were planned and produced as a production run of M&P .32 Longs.

Was this gun a one-off special order, or perhaps one of a half-dozen ordered for an agency?

I'll share the contents of the letter, when it arrives, and any info that may be provided by the S&WHF.

As is often said of S&W products, "Never Say Never." That's part of what makes all this interesting, if not a little frustrating. My hunt for an inexpensive K-Frame .32 Long shooter has resulted in quite unexpected twists and turns. I'm more of a shooter than a collector but I really enjoy learning about the older S&W revolvers and this Forum has been an excellent resource to further that education.
 
The barrel is, of course, the same as the 32-20 except for the front sight height. Perhaps, the factory used left-over 32-20 barrels and the forged sight was too low, so installed a higher sight blade to accurize the 32 Long? I am sure that all rough forged barrels had forged sights and when used for target barrels, the factory simply milled off the round sight and fitted the sight base with a target blade for all calibers pre-WWII.

I seem to recall other 32 Long M&Ps on this Forum, but it would be hard to find them.
 
You must log in or register to reply here.

Similar threads

s3dcor
A Short M&P 32 Long CTG (Update with Letter)
2
Replies
31
Views
2K
Retired W4
Retired W4
Boulder350
320 Revolving Pistol
Replies
14
Views
1K
mmaher94087
M
robertrwalsh
Just a little bit off, but I bought it any way.
Replies
16
Views
855
4K2022
4
B
Identification of S&W Hand Ejector 44 Special
Replies
9
Views
907
Mike LaNier
M
B
Another ID on (maybe) 1903 3d model .32
Replies
3
Views
507
Hondo44
H

Latest posts

Back
Top