10rd Long to 25rd Conversion!

[tactikellytailored]

Don't know if this has come up before...

Nevertheless, my boss was screwing around with one of the 10rd Long magazines and converted it to a 25rd!

Measure 3.5" down the backstrap of the magazine, then .5" in from the backstrap on both sides of the mag. Drill a .125" to .25" hole on each side...you'll hit a metal pin. Drive the pin out with a punch.

You now have a 25rd mag!

I won't be back in the shop till Wednesday and I'll try to take some pics.

If you're scrambling for mags during this panic and can only find the 10rd Long's, this may be an option for you.

 

[Airrage]

already posted, I have pics up aswell and its much easier then your way. Screwdriver and hammer then your all set!!!!

http://smith-wessonforum.com/smith-wesson-m-p-15-22/268980-removing-pin.html#post136819037

 

[tactikellytailored]

already posted, I have pics up aswell and its much easier then your way. Screwdriver and hammer then your all set!!!!

http://smith-wessonforum.com/smith-wesson-m-p-15-22/268980-removing-pin.html#post136819037

I love your way! No holes left in the mag!
Thanks for sharing...I will switch to your method for sure!

Glad this info is out there for folks.

 

[Jyezahn]

OMG!! Someone just invented this round thing... it's being called the wheel!

Just joshin'.

 

[RCR24]

already posted, I have pics up aswell and its much easier then your way. Screwdriver and hammer then your all set!!!!

http://smith-wessonforum.com/smith-wesson-m-p-15-22/268980-removing-pin.html#post136819037

I recently did this modification to my 10 round long magazine. It took no more than 2 minutes to complete and now I have a 25 round magazine


Sent from my iPad using Tapatalk