2 Piece handguards on your 15-22? YES!

[tacticool22]

Now you can put ANY 2 piece hand guard on your 15-22.
You need;
A complete AR-15 delta ring assembly with barrel nut.
A handguard cap
These two you can get HERE Or wherever you want
Whatever 2 piece handguard set you want.
My 1,3 or 5 piece kit
1) 15-22 Gas Block
3) 15-22 Gas Block, Barrel Vise Jaws, Barrel Nut Wrench
5) 15-22 Gas Block, Barrel Vise Jaws, Barrel Nut Wrench, Hand guard converter (Standard or 1A) and the hand guard converter spanner wrench.
Or any individual pieces you want.
Handguard Accessories : Tacticool22, Tactical .22 Rifle Parts and Accessories
-
Look for the release to be mid to late May.
The pics are just CAD/CAM renderings

 

[cjt50]

Excellent news sir and thank you!

Question, notice the "gas tube" channel, will that be threaded for a fastener (or some other method) to keep the hand guard cap from rotating?

 

[perfectcircle1]

So is 5 everything you need, less the handguards?

 

[perfectcircle1]

Nvmd. I get it. I should have read closer

Sent from my SCH-R760 using Tapatalk 2

 

[yugowego]

Any chance of CNCing a full FSB?

 

[tacticool22]

Excellent news sir and thank you!

Question, notice the "gas tube" channel, will that be threaded for a fastener (or some other method) to keep the hand guard cap from rotating?

Yes. It will be threaded and the screw will be provided.

yugowego FSB?

 

[cjt50]

Yes. It will be threaded and the screw will be provided.

yugowego FSB?

Excellent!!

FSB = Front Sight Base (if its the same thing yugowego is talkin' bout)

 

[El Bombardero]

Now you can put ANY 2 piece hand guard on your 15-22.
You need;
A complete AR-15 delta ring assembly with barrel nut.
A handguard cap
These two you can get HERE Or wherever you want
Whatever 2 piece handguard set you want.
My 1,3 or 5 piece kit
1) 15-22 Gas Block
3) 15-22 Gas Block, Barrel Vise Jaws, Barrel Nut Wrench
5) 15-22 Gas Block, Barrel Vise Jaws, Barrel Nut Wrench, Hand guard converter (Standard or 1A) and the hand guard converter spanner wrench.
Or any individual pieces you want.
Handguard Accessories : Tacticool22, Tactical .22 Rifle Parts and Accessories
-
Look for the release to be mid to late May.
The pics are just CAD/CAM renderings

will those pieces be black? I like the black better than some of the stainless versions I've seen other people come up with.

 

[tacticool22]

will those pieces be black? I like the black better than some of the stainless versions I've seen other people come up with.

Black. Flat black, hard anodize after bead blasting, just like most of my other stuff. It costs more to do, but close isn't right.

I might come out with a picatinny rail block, either hand guard height or gas block height. Not really sure of which one, but I'm not really sure about a picatinny one right now.

 

[spider2k]

the picatinny would be good as those wanting low pro can leave as-is and those wanting the a2 front sight can add one.

 

[yugowego]

Tacticool, how many fires you got going for all these irons

I think a pic rail even with the handguard rail would be cool

 

[yugowego]

Black. Flat black, hard anodize after bead blasting, just like most of my other stuff.

No FDE?



lol j/k

 

[rdxpo]

alright stupid question, whats the purpose/advantage of a 2 piece hand guard?

 

[yugowego]

alright stupid question, whats the purpose/advantage of a 2 piece hand guard?

Just opens you up to more options...

 

[acropora]

alright stupid question, whats the purpose/advantage of a 2 piece hand guard?

limitless options for handguards that fit on AR platforms and limitless ways to make your rifle personalized.here is my 15-22 using tacticools kit.i had to buy a few parts that he didnt have ATM but as you can see hes making a full kit which will be great for people so you dont have to track down parts and possibly get the wrong stuff.plus i havent found one standard gas block that fits the OD of the 15-22 barrel.so you either have to find a gas block with a smaller ID and have it bored out to fit the barrel or use a gas block with a larger ID and use shims to fill in the gap.i had to use two pieces of aluminum sheet that measured .040" since the gas block was .080" larger than the barrel.now if i could just get my FDE charging handle id be completely done buying stuff for this dang money pit of a rifle lol

 

[tacticool22]

OK. The 5 piece 1A kit is listed here.
Standard Hand Guard Kit - 1A (5 piece) for Smith & Wesson M&P15-22 [Standard Hand Guard Kit - 1A] - $110.00 : Tacticool22, Tactical .22 Rifle Parts and Accessories
Let me know what you think. If I have missed something, have something twice or if it's confusing...Please let me know.

 

[tacticool22]

Here are the latest pics.
The next step will be bead blasting for that super matte texture, then hard anodizing in black.

 

[cjt50]

I like it!!!

But your killing my play around account Which is ok since I cant find decent priced ammo right now. (In bulk)

 

[spider2k]

ill grab a block when you get em done. or you could just "accidentally" send one and ill "review" it. giggedy.

thanks for the super fast shipping on the barrel wrench my sorry butt should have ordered in the first place...

 

[Brett248Vista]

Jody,

Those look sweet!