m41
Member
I have searched and can't find much about the 40 cal Shield. Every post talks about the 9mm and I was wondering if the gun was to small to shot the 40 cal very well or that no one with a 40 is posting any results.
I am very interested as well. I really prefer a .40 but have heard the 9mm is the way to go with the Shields just because of the recoil. I've also heard that regular full size M&P will be getting the shield trigger?
Joe
I am very interested as well. I really prefer a .40 but have heard the 9mm is the way to go with the Shields just because of the recoil. I've also heard that regular full size M&P will be getting the shield trigger?
Joe
I have both a 9mm FS M&P and a 40 Shield. To be honest I find the shield just a tad bit snappier -- but for a 40 cal, it is a ***** cat. As for accuracy, my groupings at 7 yards are the same. I love this Shield, especially since I did an Apex trigger mod to reduce the trigger pull down to around 5.5. It is as smooth as sh** through a goose.
Don't leave home without it!
I have two 40 Shields, one with stock sights the other with Big Dots. I also have a full-size M&P 40. Compared to the full-size the Shield's have a little more snap so my grip's slightly tighter but other than that they shoot about the same as their big brother. Because I've got bigger hands I use the 7 round mags.
As for accuracy, the Shields are every bit as accurate at the same distances as the full-size all the way up to 50 yards.
I'd highly recommend the Shields especially in .40 caliber if you can find one that is.
Jfwright
You must have eagle eyes and surgeon hands if you are shooting a Shield at 50 yards!
Russ