52-1 Frame Stud/Bushing

[Sentry77]

While at the range last week, the grip on my 52-1 loosened up so I put it in my range bag and went home. When I went to clean the gun the next day I noticed that the grip screw and the frame stud/bushing were missing. I have called S&W and several other places and can't locate a replacement (I have the grip screw). Does anyone have a clue where I can locate a frame stud? It have to be round, not hex, to fit the grips. I will appreciate any help you can give me.

 

[civil1977]

It should be the same as those used on the Model 39 and subsequent variations. Have you tried Numrich?

 

[Sentry77]

Good idea, but they are sold out. The later studs (newer 39's and possibly the 52-2?) have a hex shape. There are some of those on Gunbroker. The one for the 52-1 is round. Thanks.

 

[mactab1950]

Noticed grip screws & bushings listed on Gunbroker last night.

 

[Oldshot]

The bushing may still be with you. Have you tried searching your range bag using a magnet? I've had this occur with the grip screw stud on one of my 1911's, but the stud stayed with the screw in the grip.