5900 Series Safety Conversion to Decocker

[squekydad]

Can the 5900 series safety be modified so is a decocker only? I know the 4006 CHP TSW guns had no safety and used the standard safety lever as a decocker only.

Second question is where can you find a bobbed hammer for the 5900 series.

 

[jsbethel]

You would need the spring loaded decocker body and to have the slide milled to accept it. Both parts you seek are available from Numrich.

 

[Screwball]

Is it possible on a 1006?

I can deal with the safety, but my Berettas all are now G models. Would prefer a decock only setup on my 1006.

 

[jsbethel]

Is it possible on a 1006?

I can deal with the safety, but my Berettas all are now G models. Would prefer a decock only setup on my 1006.

You would need the .45 spring loaded decocker body.
Smith & Wesson Spring Loaded Decock Assembly S&W 4506 - MPN: 262010000

 

[Screwball]

Thanks.

Does anyone do the conversion? Read the reviews, and said a new cut needs to be milled into the slide.

If it was just a parts swap, I'd do it myself. Milling the slide... way above my comfort zone.

 

[jsbethel]

On this forum, this is the guy - http://smith-wessonforum.com/smith-...ness-post140041972.html?559381=#post140041972

 

[That One Guy]

On this forum, this is the guy - http://smith-wessonforum.com/smith-...ness-post140041972.html?559381=#post140041972

I had him do the 10mm conversion on my 4013 and he did the decocker conversion on it at the same time. I can't say enough good about the work he did for me. Top notch quality work. Great communication, quick turn around and excellent pricing too. I couldn't recommend him enough.

 

[Screwball]

I had him do the 10mm conversion on my 4013 and he did the decocker conversion on it at the same time. I can't say enough good about the work he did for me. Top notch quality work. Great communication, quick turn around and excellent pricing too. I couldn't recommend him enough.

Glad to hear.

I messaged Bill after I was linked that thread. Very good guy to talk to... and my 1006 will be going to him for the work. Bought the last .45/10mm decocker assembly from MidwayUSA earlier today.

Only issue is on my end, being I live in NJ... but will figure it out in the time it takes the decocker to come.