629 vs 29 - moving to alaska

When they say big they mean BIG. I would go stainless since it is less maintenance than the blued. I have duck hunted for years and always had a hard time keeping the blued auto loader clean and rust free. Always make sure that the gun is dry dry dry when stored even overnight. If lots of moisture (par for the course in AK) the wood stocks will swell and then crack if the temp drops suddenlybefore they dry. Stainless is the route to go for me. Here are a couple of pics to give you an idea of the size of these things. A friend shot this on Kodiak.

BTW - My buddy is 6 ft tall and about 235. He is a big guy.
 

Attachments

  • bear2.jpg
    bear2.jpg
    202.6 KB · Views: 51
  • bear.jpg
    bear.jpg
    269.7 KB · Views: 45
Last edited:
RoyM52, no, at that time (1996), MN definetely had a minimum barrel length of 5". Doesn't make sense that they would label it barrel length if it included more than the barrel. I've never read anything about measuring to the firing pin, and I read the hunting regs carefully. They've since changed the law and no longer list a minimum barrel length. Recently picked-up a 629-2 Mountain Gun and am in the market for a replacement 629 no dash 4".
 
Last edited:
Groo here
If you are looking for a lighter 4in gun that wont rust.....
Look at the M-325 Thunder Ranch 45acp.
4 oz lighter than an M-69, 6 shots not 5.
And [Big Secret ] can shoot 45 super all day[if you can]
Standard 45acp good for SD of people [230gr at 800+ fps]
But loaded with 45 super , 450SMC or heavy auto rim.
Will work well.
 
I function tested my 629 today at the range for the first time; it performed flawlessly of course.

I fired 156 rounds total: 75 .44 magnum rounds (50x Sellier & Bellot 240 gr, 25x Underwood 305 gr) and 81 .44 special rounds (50x Blazer 200gr Gold Dots, 25x Hornady 180gr XTP, 6x Sig Sauer V-Crown 200gr)

I have to admit, the Underwood 305's were intense. I did not think the 629 would recoil as hard as the 14 oz Scandium .357 mag J-frames, but with this ammo it did, maybe 10-20% harder! Once I got my revolver grip sorted, the 240gr S&B's weren't bad.....I definitely need to have my support hand thumb over the wrist of my strong hand. It's a real pussicat with .44 specials, could shoot those all day of course, a lot of fun. I was shooting at 15 yards and the POI between the underwood 305gr and the Horandy 180gr specials was pretty significant! The Hornadys were about 3-4" lower in POI, even at that relatviely close distance. The sights seemed pretty much dead on from the factory for the 240gr S&B magnums.

Really pleased so far! Looking forward to putting a lot more downrange with the 629 and getting faster on draws and 6 reload 6 drills!
 
Last edited:
[...]
I have to admit, the Underwood 305's were intense.
[...]

I've never shot the 305gr ammo, so I can't speak to that. I have shot lots of 240gr Underwood's, though, and they aren't bad at all. I DO use an usually relaxed grip (with flexed and relaxed elbows), and that might part of the reason that the recoil doesn't feel bad at all to me.

If you haven't already done it, you should put the X500 grips on it ... soaks up recoil much better than the stock grips.
 
Ruger!

cfa7F75.jpg


Oh wait that wasn't an option. 629 out of the two.
 
Of course I have flirted with the idea of a .460 or .500. I had a chance to shoot a .460 x-frame and found it pretty fun, recoil downright pleasant compared to say my Model 340 scandium with .357 mag!

The issue is I want my wife to be able to shoot the thing and there is the ammo availability factor.....am I wrong in thinking that .44 magnum will be super common in stores in AK whereas .500/.460 could be hit or miss?

Then again, whenever ammo shortage hit, it seems that the "common" calibers are first to sell out....9mm, 5.56, .38 special, .308, .45 acp, etc



When I was there fishing the 500 Smiths were commonplace as the bears can get huge. Ammunition is sold everywhere including hardware stores. 45 automatics are also common and nothing below 357 Mag is practical although a homeowner outside Anchorage killed a bear one night in his house with a 40 caliber Glock. He went downstairs thinking it was a burglar, shot it and ran upstairs locking himself and family in one bedroom. They called the police who had the joy of responding to a wounded bear in a house call. The bear was dead on the kitchen floor. I bought a 4 inch 29 and a 10mm Glock for when I go back again. The last time I was there on the Kenai, there was a bear attack the week before I got there and one the week after I left.


Sent from my iPad using Tapatalk
 
When I was there fishing the 500 Smiths were commonplace as the bears can get huge. Ammunition is sold everywhere including hardware stores. 45 automatics are also common and nothing below 357 Mag is practical although a homeowner outside Anchorage killed a bear one night in his house with a 40 caliber Glock. He went downstairs thinking it was a burglar, shot it and ran upstairs locking himself and family in one bedroom. They called the police who had the joy of responding to a wounded bear in a house call. The bear was dead on the kitchen floor. I bought a 4 inch 29 and a 10mm Glock for when I go back again. The last time I was there on the Kenai, there was a bear attack the week before I got there and one the week after I left.


Sent from my iPad using Tapatalk

Yeah, not to mention the fishing guide that took down a big grizz with a S&W 3953 9mm using buffalo bore 9mm +p hard cast 147's.


Despite the "file the front sight" jokes, any firearm is better than a sharp stick imho, I just felt the 629 would be better than a 500 for general purposes (target shooting fun with specials, personal/home defense, in addition to outdoor animal protection), since I have limited funds at the moment and only have this one pistol for now.

I'm not sure how the .500's recoil compares to full house .44 mags in the 629, but based on the soreness in the web of my strong hand today, I don't think I'll want to do any .44 magnum shooting more than once a week. Grip options probably need to be explored, as mentioned earlier. I know in my 340 with .357's I preferred the thinner pachmayer grips to the stock ones or thicker hogues. If had the budget for a full arsenal, I would probably have a 500 in the stable though! I have shot the .460 once and found it pretty docile, although I can't recall what sort of ammunition was being used.
 
If S&W made an M&P in 10mm I probably would've gotten that instead. I am a much better marskman with a semi auto, and the volume of fire you can put out with an auto is undeniably better.

However, there is a certain romance to revolvers for me....they're just fun. If movng to Alaska isn't an excuse to get one in .44 or bigger, I don't know what is. I want to use this opportunity to increase my revolver skills. I've probably only fired 1000 or so rounds through revolvers in my lifetime, vs 50,000 or so through SA's. I'll be trying to even that out over the next few years.

For now the 629 is the only firearm I have in my posession, I could not bring my others with me yet. I'm carrying it in town with .44 special 200gr blazer gold dots and keeping a speedloader reload available with the underwood 305's. Obviously when we go on adventures outside of town it'll all be the magnum stuff.

Also I already ordered a plug for the lock I plan to remove, as I did with my 327 and 340.



Smart move man... If my M625 shooting Buffalo Bore .45Supers was enough to partially engage the lock/retard the action after just 2 cylinders of recoil then those 305grain Underwood .44Magnums are easily, almost twice the Muzzle Energy comparatively.
 
Back
Top