sigp220.45
US Veteran
I have a couple of Rossi revolvers. Even Rossi doesn't stamp the S&W logo on their guns.
I'm pretty sure everyone who has said it was made in a hut somewhere are right.
A losing Buy, Problems with this S&W Snub .38 spl
- Thread starter MasnarT
- Start date
I have a couple of Rossi revolvers. Even Rossi doesn't stamp the S&W logo on their guns.
I'm pretty sure everyone who has said it was made in a hut somewhere are right.
3rdgeargrndrr
Member
- Joined
- Apr 5, 2014
- Messages
- 1,162
- Reaction score
- 1,193
Late to the party but agree. The total cost of time and money put into it, you could get another one. Sorry for your loss.
If it does not time right, kaboom. It is very intricate how all the parts work together. You should not try to fix it unless you have done it 100 times.
Even the guys that know how to fix are on this forum and have said it is now garbage.
If it does not time right, kaboom. It is very intricate how all the parts work together. You should not try to fix it unless you have done it 100 times.
Even the guys that know how to fix are on this forum and have said it is now garbage.
I took it to a Local Gunsmith.
He said it's a Rossi (Brazil) with fake stamps.
The ****tiest of them All.
He shows me a Real Model 36, and everything was clear now.
The Rossi can be fixed, with hard work and money.
- the cylinder stop must be replaced.
- the extractor also must be replaced. Filling or welding then refitting or drilling won't solve the problem. At least not for long.
- the Hand should also be replaced. It's the easiest part. He can make it from steel.
- The firing pin is Ok, but not of hardened Steel. Must be replaced. He can make one.
- he can weld the Yoke, but still can't garantee it's not going to be broken again over Time. Better replaced.
- other internal parts - if left hehe - are Ok. the trigger and the return spring, the Main spring.
The bottom Line, the Gun won't be Blown or something when firing. There is no reason for that. but shooting hot Loads is not Recommended. Even if the Rossi was brand new.
Doing me a Favor, he offers 250$ for it.
He said it's a Rossi (Brazil) with fake stamps.
The ****tiest of them All.
He shows me a Real Model 36, and everything was clear now.
The Rossi can be fixed, with hard work and money.
- the cylinder stop must be replaced.
- the extractor also must be replaced. Filling or welding then refitting or drilling won't solve the problem. At least not for long.
- the Hand should also be replaced. It's the easiest part. He can make it from steel.
- The firing pin is Ok, but not of hardened Steel. Must be replaced. He can make one.
- he can weld the Yoke, but still can't garantee it's not going to be broken again over Time. Better replaced.
- other internal parts - if left hehe - are Ok. the trigger and the return spring, the Main spring.
The bottom Line, the Gun won't be Blown or something when firing. There is no reason for that. but shooting hot Loads is not Recommended. Even if the Rossi was brand new.
Doing me a Favor, he offers 250$ for it.
As others have said - that is NOT a S&W but it IS a mess... consider it worn out and purchase a replacement.
I would take the $250 and go looking for a different gun. Let him fix the problems on his own time.
It sounds like your gunsmith is proposing building a new gun inside an old one. Honestly, this makes little sense - unless you ARE the Gunsmith.
If you are doing this because it is a hobby, GREAT! Go for it!
If not:
I have been hit in the face with bits of copper jacket while firing old guns, and I have seen the consequences of a person firing a second round on top of a squib round. I do not recommend the experience.
Don't take this the wrong way - I feel for you, really. My parents came to this country from a place where my father was not even ALLOWED to own firearms, let alone afford one.
I stand by what I said, unless you are tinkering with this gun purely for fun (in which case practical advice does not apply), don't hang on to it, and don't shoot it.
Even if you have the money to make the repairs needed now, it will most likely need more repairs later. Starting in this condition, it will never be completely reliable as a defensive weapon, or for sport.
If you are doing this because it is a hobby, GREAT! Go for it!
If not:
I have been hit in the face with bits of copper jacket while firing old guns, and I have seen the consequences of a person firing a second round on top of a squib round. I do not recommend the experience.
Don't take this the wrong way - I feel for you, really. My parents came to this country from a place where my father was not even ALLOWED to own firearms, let alone afford one.
I stand by what I said, unless you are tinkering with this gun purely for fun (in which case practical advice does not apply), don't hang on to it, and don't shoot it.
Even if you have the money to make the repairs needed now, it will most likely need more repairs later. Starting in this condition, it will never be completely reliable as a defensive weapon, or for sport.
Justin T
Member
Like Steve Miller sang, "Go on, take the money and run!"
hkcavalier
US Veteran
So that's what local governments are doing...buybacks of broken guns for $100 and selling them to gunsmiths for $250! Like printing your own money! Genius!
Seeing how I wouldn't pay $5 for this gun, get that $250 and never look back.
Seeing how I wouldn't pay $5 for this gun, get that $250 and never look back.
Just Hang up the phone with the guy a few minutes ago. He kept his word. Tomorrow will be the End of the Nightmare.
He also told me that a guy is Bringing a Dan Wesson Model 14-2 in .357 Magnum for Trade in. If he Get a Good Deal, he will sell it to me in a Fair Price.
Thanks guys for all your sympathy and Help. I really appreciate it.
He also told me that a guy is Bringing a Dan Wesson Model 14-2 in .357 Magnum for Trade in. If he Get a Good Deal, he will sell it to me in a Fair Price.
Thanks guys for all your sympathy and Help. I really appreciate it.
If it's a REAL Dan Wesson, they are fine guns. Hope you can swing it!
Though I am no Dan Wesson fan, I'll hazard the guess anyhow that a .357 Magnum DW in decent condition will serve you well and be ten-times the weapon that poor thing will ever be, regardless of how skillful the repair. I think your gunsmith friend is doing you a huge favor. I'd be sure to thank him - profusely. 
I agree totally!!!
And with this, too!
Let your gunsmith play with it. For $250 you can literally buy a used gun that works.
Welcome to the Forum.
Where are you located?
Where are you located?
That looks like a VERY nice revolver. I think you are on track now! Give us a range report when you are able to shoot it. And welcome.
You did well...
...Ben
- Joined
- Jun 28, 2007
- Messages
- 27,669
- Reaction score
- 21,362
You got a real Dan Wesson, and those have a reputation for quality and durability.
You mentioned the price of firearms where you live; are there very strict laws about possession (and carry, if that is even possible)?
You mentioned the price of firearms where you live; are there very strict laws about possession (and carry, if that is even possible)?
Oh, the Dan Wesson Model 14-2. If it is anything like the Model 15-2's that I have had, you will find the double action pull to be short, but a bit heavy, the single action pull to be extremely crisp, and accuracy beyond most people's capabilities. The difference between the 14-2 and 15-2 are the sights. The 14-2 has fixed sights, the 15-2 has a fully adjustable rear sight and the front sight is taller to match the taller rear sight.
Or new vehicles, which lose 15-20% of their initial sales price the moment they are driven off the dealer's lot.
That's a good looking DW. Great! As someone said, now you're really off and running. I can sense your excitement. I'll bet most of us here have walked out of the gunshop, gotten in the car, and sat there happily admiring a new acquisition. I know I have. 
Congratulations on your new sixgun! 
Congratulations on your new sixgun! 
