Aging eys and prescription shooting glasses

DIYguy

Member
Joined
Dec 23, 2015
Messages
67
Reaction score
15
Location
Twin Cities, MN
I'm looking for options for shooting glasses for USPSA and IPSC.
I'm sure I have a lot of company with the same problem, need a crisp focus for my pistol sights at arms length but still need to be able to see my target.
I'm at that point where I finally broke down and surrendered to bifocals but still adapting. Tried using the bifocals for shooting and I can see my sights but target is pretty blurry. Tried shooting with my single vision readers and same problem.
Totally blew a comstock stage last night, clipped two hits in the no shoot but didn't know I did as I didn't see the hits so had two mikes and two no shoots for one target.
Has anyone found a solution for aging eyes, sights, target, quick acquisition, etc?
Been shopping online, one site is Tactical RX, I'm sure there are others.
Bifocal for dominate shooting eye, different prescription for other eye? Recommendations for companies?
Need help, any recommendations?
 
Register to hide this ad
It is more important to see the sights clearly than the target. For best results, I shoot handguns with glasses ground to my reading prescription. I use them when working at a computer too. Ordinary bifocals are awkward, making you bend you head backwards.

Other possibilities are a flip-down peep sight for the shooting eye. The small orifice increases the depth of field (like it does on a camera), so you can see both the sights and target clearly. There are sticky "peep sights" you can put on ordinary glasses. I'm not sure which prescription would work best.
 
To get it right, I finally went to a local optical shop and had them custom made. Ended up with tinted, safety, shatterproof prescription glasses that work oh so good and didn't cost an arm and a leg either.
You do need to be careful, however, that they know these are for pistol shooting rather than, say, trap shooting so they can get to focal point in the right place...for pistols, out about where the front sight on a long barrel revolver when held at arms length. Some optical techs are knowledgeable but to others, shooting is shooting and they do not dirrerentiate between pistols, shotguns and 1000 yard rifle shooters.
At age 70 with aging eyes, this investment has put the fun back into shooting!!!
 
Anyone ever try Tactical RX and their Almost Lens?
I like the idea of dominate eye bifocal with the bifocal at the top and rest of lens set for distance. Not cheap but sounds "on target" for USPSA.
 
Check out..... Hansen Eagle Eye ....... shooting glasses..... they add a "sighting lens" area to a plain or prescription lens.....


I'm like 20/25 in my right eye (20/15 left)......I've got two pair... they work well ..... except where IDPA wants you to shoot while moving....you sometime get a double image as your pupil crosses the bi-focal line.... but works fine for range or hunting.....
 
I have my shooting glasses ground to MONOVISION specification.
Right eye is focused on the front sight.
Left eye is focused to infinity.
This is generally done with contact lenses, but is possible with spectacles, too.
Monovision makes some folks uncomfortable, but it's no problem for me.
 
WHAT TAROMAN SAID

I have my shooting glasses ground to MONOVISION specification.
Right eye is focused on the front sight.
Left eye is focused to infinity.
This is generally done with contact lenses, but is possible with spectacles, too.
Monovision makes some folks uncomfortable, but it's no problem for me.

I did same. Measured distance from eye to front sight and had my optometrists write a RX for a mono scrip for that measurement strong eye and distance for the other. Then went to one of the box eye shops and had safety glasses made. They were cheap as prescription glasses go. I think out the door was $45-50.
Put them on about 20 minutes before shooting, your brain will adjust. I don't even notice after that time. Unless I need to see some small details. I keep my regular glasses handy for that!
 
I did same. Measured distance from eye to front sight and had my optometrists write a RX for a mono scrip for that measurement strong eye and distance for the other. Then went to one of the box eye shops and had safety glasses made. They were cheap as prescription glasses go. I think out the door was $45-50.
Put them on about 20 minutes before shooting, your brain will adjust. I don't even notice after that time. Unless I need to see some small details. I keep my regular glasses handy for that!
Same here. Best $$ spent at Walmart ever!
 
Monvision

Same here. Best $$ spent at Walmart ever!

I wanted to try this and asked at Walmart but they wouldn't do it for me with glasses. My wife has monovision contacts from Walmart, not sure why they wouldn't do the glasses for me. I ended up settling for "computer" glasses and they focus crystal clear for me anyway on the front sight
Norm
 
Went to tri-focals several years ago, which made it easy. Middle lens is focused at front sight distance, which is also useful for reading the instrument panel in the car. Even if you don't need tri-focals yet, you could ask the optometrist if there's any harm in doing this just for your dominant eye.
 
I wanted to try this and asked at Walmart but they wouldn't do it for me with glasses. My wife has monovision contacts from Walmart, not sure why they wouldn't do the glasses for me. I ended up settling for "computer" glasses and they focus crystal clear for me anyway on the front sight
Norm

Have your eye doctor write a prescription for what you need.
Any dispensary will fill it no problem.
I order mine from Zenni.
 
I'm 81 and have improved my shooting fun recently with cheap Walmart reading glasses. My ophthalmologist has agreed that this is good until I need cataract surgery. Then he will fix my problem. My distant vision is excellent. My near is poor. I have a pair of everything from 1.25 to 2.75. I use the low numbers for shooting my old open sight military rifles. I use the higher numbers for pistol shooting. Pick the pair that lets you see the front sight clearly. You must adapt for the fuzzies at the target, but you must do that with 18 year old eyes as well. This has brought new excitement to my shooting. Try it. All you have to lose is a few bucks for the cheap reading glasses.
 
My cheap reading glasses are 2.0, but I've found 1.25 ideal for shooting. I got a pair of 1.25 safety glasses through Amazon for about $12. These are overall 1.25, not bi-focal (I tried bi-focal ones, but had to tilt my head back).
 
I've been thru this. I'm nearsighted with no glasses but farsighted with my distance prescription.

I take a 6" revolver with me to the optometrist. I'm right handed and we leave my left lens my distance correction and lessen my right eye correction 'til the rear sight is just clear enough.

Basically we're moving my depth of field closer so the rear sight is right on the close side edge of it. This gives a clear front sight blade and the least blurry target.

My right eye distance correction is -3.25 Sphere and the iron sights shooting lens has that reduced to -2.25, Cylinder and Axis stay the same.

Of course the best solution is a red dot but it's worth taking a red dot along too to make sure it looks round and not like a cluster of grapes...

FWIW my computer glasses have a right eye Sphere of -1.75. Another .50 reduction from my shooting correction.

With a distance correction for my left eye it's easy to forget I have my shooting glasses on and drive home with them on. Distance vision is still that good but they also let me see the sights.
 
Last edited:
I Solved Your Problem

First, remember that even with young eyes, your eyes may only focus on one thing, and that's the front sight. The target must be a bit fuzzy.

Now, for the solution: I made myself a mock sight plane from a piece of lattice molding that mimics a handgun sight plane, consisting of a rear sight made of vinyl electricians tape, folded over and notched square. I made a wood front sight and attached the "sights" to my lattice molding.

This is necessary for what follows. I took my sighting place to BJ's where you may buy reading glasses in different strengths. Using the mock sight, I went through the entire rack, from +1.00 to +3.50, finding that +1.50 gave me a clear and crisp sight picture with the target just a bit fuzzy. I then bought three or four pair for $20.00, leaving them in my two range bags and a pair in my nightstand drawer.

Now, you can also do this with a real gun but I strongly advise against it as you'll have an entire swat team around your neck in a matter of minutes. That's why you need the mock sight plane.
 
I have a pair of prescription shooting glasses my optometrist made that are similar to my computer glasses. Focal length is set at about 27".
I've always had very good eyesight but age catches up and after 45 had to start use reading glasses. Every four years or so the prescription gets a bit stronger and now at 61 distance needs some help also.
The single vision shooting glasses are great using a scope and OK for the indoor range as I can bring the targets back to check my hits. Problem is, the magnification that lets me see the front sight clear makes the target VERY blurry. I can not see my hits on the target during the run-n-gun matches.
I'm looking into safety shooting glasses with my far vision prescription for the main glasses and a bifocal window at the top of the right lens for my sights. Thought is, tip head down for sight picture, one eye only, tip head up for rest of lens and check my hits.
Been swapping e-mails with Tactical Rx for this type of glasses. I have HSA account and can tap into my account to cover the glasses.
Still wondering if anyone has used Tactical Rx or shot using this type of glasses?
 
I ordered a set of Decot prescription glasses at Shot Show a few years ago. Right lens for front sight left lens for distance. Takes a minute for my eyes to adjust after putting them on but makes a big difference shooting indoors and trying to find front sight with lineless bifocals.
 
Here's another solution. Buy some of the stick-on bifocals from Amazon. They attach to your regular glasses through surface tension from a drop of water. Use a sharp pair of scissors to trim them to size. The lowest power worked best for pistol iron sights.

I cut out a circle about 3/8" in diameter and stuck it to my prescription safety glasses. It's big enough to sight properly and small enough that I can walk around without changing glasses or bashing my noggin into things.

Previously, I used my computer glasses. Perfect for shooting, but I had to change glasses to navigate.
 
Back
Top