An M1903A3 "parade rifle"

Joined
Jan 24, 2007
Messages
10,358
Reaction score
51,882
Location
Arizona
At the Phoenix gun show yesterday, I picked up an unusual addition to my U.S. military rifle collection. This is a model 1903A3 rifle on which the metal parts have been completely chrome plated for drill team, honor guard, color guard, parade and ceremonial use. Now some will tell you that these are not considered U.S. issue arms. I have to differ on that.

The U.S. Army's 3rd Infantry (The Old Guard) drill team uses them. This is the outfit that guards the Tomb of the Unknowns at Arlington. Their drill team is a spit and polish group, among the best at what they do. The CMP recently sold a number that had been plated by the Navy and deactivated so that they could not fire. They sold for $525 each. The Springfield Armory Museum has a few examples in their collection, which they obtained from Rock Island Arsenal. It's unknown if RIA did the work, however.

My example is a Remington, with a 4-groove barrel marked "3-43" that's in pretty good shape. It's fully functional and is capable of firing live ammo. It's unusual in that even the rear sight is fully plated. Many used standard blued rear sights, and some had the rear sight (sometimes even the front sight) removed completely to prevent injury when twirling the rifles in fancy drill.

I remember when I was in college ROTC, I was on a drill team, and we used them. Most of the rear sights had been knocked off.

At any rate, I chose from about 8 rifles that were similar; they came from a collector of these plated rifles who had deceased; his family was disposing of them for $250 each, although I managed to sweet-talk them into letting me have one for $200. I noted that the barrel needed cleaning - it might have been used for graveside ceremonial blank firing by a veterans' group. The lands and grooves are still fairly sharp with just a trace of frostiness.

This one is equipped with an original white parade sling; now all I need is a chromed bayonet to complete the setup - I've seen them for sale from time to time. Maybe someone here has one????

John

Here's a photo:

PARADE_RIFLE-SMALL.jpg
 
Last edited:
Register to hide this ad
Very nice. Great looking wood on that one.

My drill rifle as a Marine midshipman was a '03A3. It was a Remington with a 7/43 marked barrel. The only alterations was the removal of the front sight and the tip of the firing pin was ground off.

Later, these rifles ('03s and '03A3s) were demilled by having rods welded inside of the barrels. :(:(

During my cop days, I investigated a burglary at a funeral home. While checking a closet, I found a number of nickel plated '03s and '03A3s. These were used for military funerals.
 
Last edited:
Hi:
Many years ago my High School Band Drill Team had Krag 30/40 Rifles that the metals were nickeled plated and the wood paint white. As I recall the rifles were fully functional.
Jimmy
 
Mine's a 1903, but the sights were left black. It is the best shooting '03 I have ever owned and I have owned a bunch of them. It shoots cast and jacketed equally well and doesn't mind bad weather.

I paid, IIRC, $300 for it ten years or so ago.

It is one of my "never sell" guns.

Bob
 
Sweet. I saw a lot of '03s yesterday at the world's largest gun show, and there wasn't even an old, worn out, beaten up, drug behind the truck example at $200. You stole it!
 
On active...

...duty, I was assigned to the 3rd Naval Construction Brigade PR Staff Drill Team. Our issue "dress" rifles were 03-A3 rifles, chrome-plated. The difference in your rifle and ours was that the sight blade was filed all the way down. No one wanted to catch a sight blade in the hand or wrist. We also had bayonets fixed, even using tape to insure that a broken bayonet stud wouldn't cause it to come off.

In high school, our drill team also had chrome-plated 03-A3's. I always thought they were fairly common among drill teams, except for the USMC (they've always used M1's).

That's a great find, and seeing it brings back some great service memories.
 
A few years back, I bought an M-1 Carbine at a gun show that was chromed. It is fully functional with a chromed 30 round banana magazine. I use it occasionally for plinking. I hace even kept it in the corner opf the bedroom for HD.
 
1903

The blanks used had corrosive powder. Double check and you might clean it out with hot soapy water. Then solvent. Very nice find.
 
Brings back good memories from my ROTC Drill Team days. Mine didn't have a firing pin. I'd sure love to have it back. You did good.
 
About 12 years ago out at Camp Perry the CMP had maybe 200 chrome/nickle plated 1903, not A3's. These rifles were fully fuctional, not welded up. CMP wanted $150 each. Myself and a group of buddies of mine bought around 5 or 6 of them at the Matches and had them stripped of the shiney finish and reparked them. They came out great and are good shooters still.
 
...duty, I was assigned to the 3rd Naval Construction Brigade PR Staff Drill Team. Our issue "dress" rifles were 03-A3 rifles, chrome-plated. The difference in your rifle and ours was that the sight blade was filed all the way down. No one wanted to catch a sight blade in the hand or wrist. We also had bayonets fixed, even using tape to insure that a broken bayonet stud wouldn't cause it to come off.

In high school, our drill team also had chrome-plated 03-A3's. I always thought they were fairly common among drill teams, except for the USMC (they've always used M1's).

That's a great find, and seeing it brings back some great service memories.

I've seen pictures of the ones that the 3rd Infantry drill team uses. They also tape their fixed bayonets on the rifles.

Sure would like to find a chromed bayonet for this one!

John
 
  • Like
Reactions: A10
The U.S. Army's 3rd Infantry (The Old Guard) drill team uses them. This is the outfit that guards the Tomb of the Unknowns at Arlington.

It looks like the actual guards use M-14s. Probably don't fly as smoothly when you fling them up in the air.

4393913860_1bd5b36e20_b_d.jpg
 
Well it looks like my sons dream-de-jour is possible. I's lusting after a 1903 to complete his Used-In-Multiple-Wars-Triplet. He has a Mosin and a SMLE and now wants a 1903 to complete it.

Perhaps this weekend in Boone. Fingers, eyes, toes and ears crossed.

Great job BTW, a wonderful find.

B2
 
Update on my search for a chromed bayonet!

CHROMED_M1_BAYONET-1280_zpsysnzcdzw.jpg


I'm pleased to report that my M1903A3 chromed parade/drill rifle is now replete with a matching chromed bayonet! I found this one at a gun show yesterday, complete with a scabbard that also has its metal parts plated.

While some don't care for these rifles (which I understand), I find them really interesting. I understand the Director of Civilian Marksmanship (modern day CMP) once released many of these chromed rifles for sale. Many were loaned to American Legion posts and other veterans organizations for ceremonially firing blank volleys at vets' funerals. One wonders over how many such events this particular rifle was fired.

I predict that in the future these shiny rifles, many plated by the government itself, will become sought after collector items, and all the more so with a matching bayonet.

I was at a changing of the guard ceremony at Arlington in September, and I noted that the guards' M14 bayonets were chrome plated and fitted with wooden scales. I researched this and discovered that 1,100 of them were ordered by the 3rd Infantry (Old Guard) that protects the Tomb of the Unknowns. These are the only plated M14 bayonets officially extant and in themselves would be valued collector items.

Thought I'd share my joy at finding an appropriate chromed bayonet for my '03A3 rifle - took me over four years!

John
 
Last edited:
Thanks for posting that John. It takes me back to high school ROTC. We practiced with parkerized versions with nylon stocks as the wooden stocks would shatter to bits when dropped. We had very nice chrome plated versions with shellacked stocks for parades and competitions. Our versions had a piece of round stock welded in the breech. I would have loved to been able to fire blanks during our routines.

If you come across another live version for $200 or so, drop me a line :)
 
Congratulations on your find! That's a beautiful example.

We had identical chrome-plated bayonets for our 03-A3's. We had a white vinyl cover for the scabbard. We had the carpentry shop take a couple of old 03-A3 stocks and make blank scales for us. We'd then file and sand until they fitted the bayonet perfectly. We then finished them to match our rifle stocks.

Most of us used Tru Oil for the stock and bayonet finishes. It was pretty much goof proof.
 
Back
Top