Any 9mm revolvers?

[Triggernosis]

Wouldn't that be neat? I think Pinnacle Guns can do a conversion to 9mm. Might be worth the cost just in ammo savings alone.

 

[CALREB]

Good ol S+W has made several 9mm revolvers model 547 m+p and 940 centennialat least, Bob

 

[TSQUARED]

S&Whas also made one run of the 686 as a 6 shot 38 Super and two runs of the 627 as an 8 shot 38 Super. I believe the 9mm tapered case presents some extraction difficluties which are obviated by the use of the straight walled 38 Super.

 

[safearm]

There are a number of us on this forum who have 9mm revolvers. I have a 940, which was made for 9mm, and a "937," a 637 converted to 9mm moonclips by TK Custom. Search the forum; there are a number of discussions about this topic.

 

[03gringo]

I own a 3" barrel Model 547, and enjoy shooting it. That gun is also a "conversation piece" in that most people guess it is a Model 13 .357 Magnum, or maybe a Model 10 .38 Special heavy barrel. I usually get a comment like "I didn't know S&W ever made a 9mm revolver".

Kenny

 

[tekarra]

I have several 547s, a 940 and a pair of Ruger Speed Sixes. The 547s are my favourite shooters.

 

[jppezz23]

Yes Ruger made 500 for the LAPD but they were sold off my friend has one i believe it a seven shot in stainless.Very nice gun.

 

[stiab]

 

[HEADKNOCKER]

The 547s are without a doubt the best shooters out there..
Sold my 4" M547 around Christmas time..
I also have a 940 that's one of my #1 snubbies..
Plus a 642 that's had a 940-1 cylinder fitted as a convertible..
I had two SP101 9mms also..Sold both of them like an idiot..

Ruger also made a Blackhawk with an convertible 9mm/357 cylinder as well as the Speed Six & SP101s in 9mm para

Taurus also makes a 9mm revolver currently & as far as I know all the others Ruger & S&W have been discontinued..

 

[sw1977]

I have 2 SW 940 2'' and 1 SW 940 3"

 

[CALREB]

I'm curious when the "500 were made for LAPD " was, as no Ruger has ever been an approved weapon for LAPD.I know other non-approved weapons that have been made for the City or the Los Angeles Police Revolver and Athletic Club,but I have never heard of the Rugers.Would like to see one. Bob

 

[whelenshooter]

I have a stainless Speed Six in 9mm I've had for about 25 years. It is a 6-shot gun with about a 2.5-inch barrel and it came with half-moon clips. I don't know if full moon clips are made for it by any aftermarket companies, but Ruger didn't make any that I know of. It is a good shooter, but the double action trigger pull is decidedly inferior to a K-Frame Smith & Wesson. The pull weight isn't heavy, but for me there seems to be a bit of a jerk to one side as the sear breaks. If anyone is interested in seeing it, I'll post a photo, otherwise we can just talk about it. It is a nice gun, but it is big and heavy for the power level. The same gun is made in .357, which would give more stopping power.

 

[WC145]

I had Pinnacle convert a 360J and do some other work to it for me. Mark does excellent work and my gun came out great, I carry it almost everyday. Here's a couple of pics (apologies to those who have seen them before):

 

[5Wire]

Model 547 3-in round butt 9mm:

Model 547 4-inch Square Butt 9mm:

 

[HEADKNOCKER]

Models 547 4" & Pair of Models 940 2"
The 4" M547 is the most accurate 9mm handgun I've ever shot
I Sold/Traded the top two but the bottom 940 Remains

 

[Big Foot]

I thought the S&W 547 would be a fine revolver, but the trigger is really stout...Only a box through each, but enough to convince me to sell them...Not happy at all...Because of the appreciation it's going through, holding on as an investment for now...Why not a trigger job? Most purists want a undisturbed piece.

 

[David Sinko]

My 940 is an excellent revolver and is proof positive that S&W CAN build a great 9mm revolver; they just don't WANT to. Apparently it's a lot of trouble these days and not worth the effort. Same with the .38 Super. S&W is notorious for putting .357" barrels on some of their Supers (like the expensive first run PC eight shooters). These revolvers should also be made to work without moonclips but nowadays that's too much trouble too. Any new production 9mm or .38 Super revolver must be eyed with great suspicion. S&W's proclivity for taking shortcuts has been firmly established and I doubt they'll ever make a good 9mm revolver again.

Dave Sinko

 

[roaddog28]

Yes Ruger made 500 for the LAPD but they were sold off my friend has one i believe it a seven shot in stainless.Very nice gun.

You are right. Ruger made a run of Security Sixes in 9 mm back I believe in the seventies. Actually they are rare and comand a good price. Also the Ruger SP101 was also chambered in 9 mm for a while. Both revolvers from Ruger never were big sellers so Ruger quit making them.

Regards,
roaddog28

 

[H Richard]

940's make great carry revolvers, and reload quickly with the moon-clip's.

 

[Smee78]

I really enjoy my Smith 940, was my daily carry for some time, I also just bought another cylinder for my Ruger security six and plan on having the cylinder fitted/worked over at Pinnacle with the 9x23 conversion so I can shoot 9mm and 38 super as well. I also have a Ruger speed six in 9mm but have not shot it yet, so I cannot comment on it.

 

[k22fan]

Security Six 9mm?

Ruger made a run of Security Sixes in 9 mm back I believe in the seventies. Actually they are rare and comand a good price.

I've gotten curious enough to beg for a Ruger expert to straighten out the information in this thread or for a verifiable source. The reason is, I'd love to have a 9mm revolver that is competitive against moon clip loading model 686s, 627s & 625s in matches, and I'd pay a "good price" to get one. Security Sixes were affordable utility guns that lacked the class of S&Ws, but my experience with one has been quite positive. It is my understanding that Ruger only made Service Sixes and Speed Sixes in 9mm, not Security Sixes. I see the 9mm Speed Sixes around, but not the Service Sixes, so were more of the snub noses made?

Getting back to S&Ws, David Sinko writes "S&W is notorious for putting .357" barrels on some of their Supers (like the expensive first run PC eight shooters)." Do the current, or 2nd run of 627 .38 Supers have smaller groove diameters and what about the L frame .38 Supers?

Thanks in advance for any additional information.

Gil

 

[tekarra]

There is a lot of discussion of 9mms here.

Big Foot; How about some more photos and details on your 547s? I have several and all the triggers are superior to my other S&Ws.

David Sinko; Your comments about S&W and 9mm revolvers may have validity, but I sure would like to see them prove you wrong and re-introduce the 547 and 940.

Here are a few of my 9mm revolvers, apologies for the photo quality.

 

[Tupperware]

Why not a trigger job? Most purists want a undisturbed piece.

Don't give up so quick. It's possible to dramatically improve the double action trigger pull on a Smith revo without any permanent modifications to original parts.

 

[Engine49guy]

Ruger made a Blackhawk with convertable 357 and 9mm cylinders.
( also made on in 30 M1 carbine caliber.)

Saw a blued one listed on a local forum here....

Also saw a Colt Trooper in 9mm but it was apparently a rare gun.

 

[HEADKNOCKER]

547s are known for having a heavier than normal trigger pull originaly as they were designed for Hard primer military ammo & they have two firing pins one that strike the case to push it farward & the other to set the primer off.. I always assumed S&W made them with a heavier hammer spring than they used in other revolvers to maintain 100% reliability with any ammo used..
Both the hammer spring & rebound springs can be changed & a few areas internaly such as the rebound slide can be smoothed & the trigger pull can be as good as any K frame..
Also the original springs can be kept & labeled were they came from if you ever sell it..
I've always liked the Ruger Speed Six in 9mm but have never came across one when the finacial advisers were graceing me with their presence..
The Idea of being able to shoot the much cheaper 9mm para cartridge in a revolver is a great one..
Gary/Hk

 

[5Wire]

The 3-inch's trigger was different than the 4-inch's on mine. The 4-inch double action felt more "normal" to pull where the 3-inch's double action pull felt more like a "high lift" cam, a shorter, faster but heavier stroke. The single action pulls were about the same, to me, pretty crisp.

 

[Big Foot]

Thanks Headknocker & Tupperware, good suggestions for a lighter squeeze. Maybe my strength isn't what it used to be..I don't have a trigger guage, I bet it exceeds 14 lbs. My friends guage only goes to 12 lbs and it exceeds his scale.
Also, like many out there, you have the quandry of firing a rapid appreciated pistol, the usage vs the rewards when selling. I have other range guns and so it makes the choice easier for me...

 

[David Sinko]

A six shot 9mm revolver really has no place in the gun games, especially if moonclipped. In IDPA it would be an ESR gun and have to be loaded to 165 PF. It could be used in USPSA but then at minor and would have no advantage. A six shooter doesn't hold enough rounds to be really competitive in Steel Challenge type events and it doesn't have much to offer for ICORE either. And besides, use of the moonclipped .38 Short Colt in eight shot .357 Magnum revolver works so well that not many serious shooters want to bother with 9mm.

In my experience the 9mm revolver is most viable and useful as a pocket gun. The 9mm and .38 Special produce similar ballistics out of the 2" barrels and the 9mm is more convenient with moonclips and full length extraction. The 547 seems to be a very expensive and complicated revolver to produce. And who today wants a 9mm revolver that uses speedloaders and can NOT use moonclips?

In this day and age I fear the 9mm revolver is dead, at least as a new production item.

Dave Sinko

 

[5Wire]

Dave, not all people buy revolvers to play games.

 

[k22fan]

A six shot 9mm revolver really has no place in the gun games...

I don't doubt you are correct for highly populated areas that can turn out large enough numbers of shooters to split them between disciplines and turn away would be participants who show up with equipment that does not meet nit-picky rules. In my small city the only match that is run "correctly" by somebody else's official rules is a monthly IPSC match that draws shooters from out of the area. Nearly all the other matches except for cowboy have these rules in common: maximum 6 ctg. in any gun, .380 ACP minimum, and steel targets must fall down for a decent score. 9mm reliably knocks down all the steel at our club and all the clubs within 2 hour's drive. The six round rule is popular so revolvers do not have to be scored separately. A weekly series just started that is limited to open sights primarily so that new shooter don't arrive, take one look at gamers' exotic guns, turn around and leave. I love open sights only!

I can shoot in my back yard for free. If I get motivated to spend over 3 hours on the highway and pay the fees for a correctly run match, bullseye gets 1st priority. I wish there was enough interest to run a bullseye series by the rules, but bullseye is set up so you can spend a lifetime trying to improve your score, and most shooters want high scores to take less effort. For a revolver enthusiast at most of the matches run locally, a 9mm with moon clips would be the most economical to feed when I don't have time for reloading.

Best regards;

Gil