These look so nice that I felt myself tempted to go out and find a nice 3rd 5904.
Anyone try the KSDgrips??
- Thread starter nocents
- Start date
mpi
Member
wondering what the "feel" is on the Beretta and 4506 models, i have short fingers and don't want to spend money and time to find that they are too bulky.
Factory 6906 (compact 5906) grips are 32.75mm thick.
I know you're just ramping up production and I've asked before, but do you have any plans to make grips for the 391x series of 9mm compacts?
They are pretty popular, especially on this forum, and I think you'd see some demand.
They are pretty popular, especially on this forum, and I think you'd see some demand.
No problem..... the 4566 grips make sense wood vs Hogue Rubber.......
the 5906 grips......wood thinner than factory ????.....one of us has to be off......
I'm 99% sure the 5906 and 6906 frames are the same.....you can use a 5906 mag in a 6906.........won't be able to double check my number until tomorrow.......
The 6996 trip is shorter. A 5906 mag will fit and work fine, but will stick out the bottom of mag well.
We/I am looking at overall thickness..... of the grips/guns..........I grabbed the 6906 cus it was handy....... I think the grip frames and factory grips are the same thickness.....
KSDgrips
Member
- Joined
- Apr 25, 2015
- Messages
- 62
- Reaction score
- 137
We made the grips for 3913 series.Pictures are coming tomorrow or next day.They are working on couple diffrent design.Factory look with laser engraved logo,Factory look with medallion and orthopedic one.Cs9 is coming out same time.yes 5906 is 32 mm.
Last edited:
Got it. I just didn't realize that you were talking about thickness and not overall size. I think you're right.
Thanks. I can't wait to see what they look like.
I suspect that the CS9 grips will be very, very, popular as well.
I suspect that the CS9 grips will be very, very, popular as well.
OP
nocents
Member
thank-you..............am I the only one that doesnt't know what the "orthopedic one" means??
as it relates to a grip design
KSDgrips
Member
- Joined
- Apr 25, 2015
- Messages
- 62
- Reaction score
- 137
Pulled a 915........ grips and gun are 32.5 to 32.7mm thick (2" & 3" from the bottom)
.......grips are 3.25mm thick (bottom edge)
.........frame is 25.27 thick at (bottom edge)
There is 1mm in there.........guessing that the grips must be .5mm thicker towards the middle
KSDgrips
Member
- Joined
- Apr 25, 2015
- Messages
- 62
- Reaction score
- 137
it is ready.39xx series.Stock item is walnut.Rosewoods and Santos's are custom.The one with medallions are also ready I will upload other pictures tomorrow.[URL=http://s1381.photobucket.com/user/Saffet_Ozturk/media/Mobile%20Uploads/Screenshot_2015-09-15-21-13-54-1_zps2ceazltw.png.html]
[/URL][URL=http://s1381.photobucket.com/user/Saffet_Ozturk/media/Mobile%20Uploads/Screenshot_2015-09-15-21-13-54-2_zpst2lgmyxr.png.html]
[/URL]
[/URL][URL=http://s1381.photobucket.com/user/Saffet_Ozturk/media/Mobile%20Uploads/Screenshot_2015-09-15-21-13-54-2_zpst2lgmyxr.png.html]
[/URL]
Last edited:
These are absolutely gorgeous stocks, no two ways about it.
In looking at -all- the different guns represented... I can't possibly see any way that the logos and emblems are licensed. I'll be the first to admit that I have no idea how such copyright restrictions are applied and enforced but if I were a betting man, I would say to "get 'em while you can" because some of these companies are well known for spending their time & energy protecting their properties. S&W, for one, chases down websites that host .pdf versions of their factory owner's manuals.
Now this could be because S&W wishes to ENSURE that any/every end user always has THE most up to date version... or it could be that they take their rights seriously and pursue those rights to great lengths.
In looking at -all- the different guns represented... I can't possibly see any way that the logos and emblems are licensed. I'll be the first to admit that I have no idea how such copyright restrictions are applied and enforced but if I were a betting man, I would say to "get 'em while you can" because some of these companies are well known for spending their time & energy protecting their properties. S&W, for one, chases down websites that host .pdf versions of their factory owner's manuals.
Now this could be because S&W wishes to ENSURE that any/every end user always has THE most up to date version... or it could be that they take their rights seriously and pursue those rights to great lengths.
