yanici
US Veteran
I dry fired the heck out of my new 642. The trigger wouldn't even return all the way when new so I put in a few drops of oil through the hand hole and dry fired a lot. I repeated this treatment 'til the trigger was smoothed out. The thing is that I'm getting black oil seeping out of the crack in the side plate. Mostly it seeps near the top.
I thought I might take off the side plate and blast it out with carb or brake cleaner and then relube it.
Will the carb or brake cleaner ruin the clearcote finish on the gun?
See post 12 below. I later found a broken hammer stud!
I thought I might take off the side plate and blast it out with carb or brake cleaner and then relube it.
Will the carb or brake cleaner ruin the clearcote finish on the gun?
See post 12 below. I later found a broken hammer stud!